BCnSTL
Max Output Level: -90 dBFS
- Total Posts : 44
- Joined: 2011/08/30 15:48:13
- Status: offline
Take lanes - what am I doing wrong?
I'm new to X2 so I'm hoping someone can help me out. I just did 4 passes of a guitar part. When I finished, I assumed I would have each pass in it's own lane and I could comp from there. Instead, this is what I ended up with. (3 empty take lanes, and 1 lane with audio from the last take). What settings do I have wrong?  Here's the image url: after 4 takes Any help would be very much appreciated.
|
AT
Max Output Level: 0 dBFS
- Total Posts : 10654
- Joined: 2004/01/09 10:42:46
- Location: TeXaS
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 00:37:55
(permalink)
It is too small to see what is going on.
The lanes are opened w/ the small buttons in the track box in the bottom left. One for "takes" and the other button for automation. Sometimes it is a little funky. I was testing an X1 project and had both vol and pan automation. After closing the lanes when I opened them back up the vol automation lane disappeared and the vol automation itself went back over the audio. I simply closed the lanes and opened them before it caught again.
@
https://soundcloud.com/a-pleasure-dome
http://www.bnoir-film.com/ there came forth little children out of the city, and mocked him, and said unto him, Go up, thou bald head; go up, thou bald head. 24 And he turned back, and looked on them, and cursed them in the name of the Lord. And there came forth two she bears out of the wood, and tare forty and two children of them.
|
tunekicker
Max Output Level: -65 dBFS
- Total Posts : 1261
- Joined: 2005/10/28 14:39:50
- Location: Grand Junction, CO
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 01:04:45
(permalink)
The Image URL points to the thumbnail that is tiny. Any way we can see a bigger view?
|
Thatsastrat
Max Output Level: -65 dBFS
- Total Posts : 1267
- Joined: 2004/05/09 02:20:19
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 01:12:17
(permalink)
Open up your pereference page by pressing "P"
go to the recording section
Make sure you put a ckeckmake in the box that reads"store takes in separate tracks"
This has to be done on a per project basis.
Do this and then see if it doesn't capture all of your takes and let you have them in separate lanes.
Sonar Platimum, Win10 32bit, Quad Q6600,4G DDR2 Ram, BCF2000, Lexicon Lambda interface,Tascam US 1800, WD 500 GB HD, M-Audio AV40 Monitors, Line 6 DI Gold, Guitar Rig 5 Pro, hand full of guitars, Kawia PH50 Keyboard,Digitech GNX3 http://www.soundclick.com/thatsastrat/%3C/a%3E http://www.myspace.com/thatsastrat/music
|
kevo
Max Output Level: -70 dBFS
- Total Posts : 1038
- Joined: 2005/06/28 15:04:27
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 04:44:36
(permalink)
Thatsastrat
Open up your pereference page by pressing "P"
go to the recording section
Make sure you put a ckeckmake in the box that reads"store takes in separate tracks"
This has to be done on a per project basis.
Do this and then see if it doesn't capture all of your takes and let you have them in separate lanes.
Also make sure "Sound on Sound" is ticked. Not sure how you got Sonar to run on your phone... but dang! that is a small screen!
|
BCnSTL
Max Output Level: -90 dBFS
- Total Posts : 44
- Joined: 2011/08/30 15:48:13
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 16:47:14
(permalink)
|
Muziekschuur at home
Max Output Level: -62 dBFS
- Total Posts : 1442
- Joined: 2006/03/01 03:30:22
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 17:05:28
(permalink)
What OS are you using?
It's working fine here. Did you patch the X2?
I chose the 16 channel 4 bus with SSL preset and used lanes there. Perhaps you can choose that project and go from there?
Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24. M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport. Remote recording Alesis HD-24 & Phonic MRS 1-20. P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks) Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
|
kevo
Max Output Level: -70 dBFS
- Total Posts : 1038
- Joined: 2005/06/28 15:04:27
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 17:14:12
(permalink)
BCnSTL
Let's try this again:
https://lh6.googleusercontent.com/-ChgkzFQWTS4/UGj8XZMXrXI/AAAAAAAAPaw/NYW1ctMYWf0/s1314/takes1.png
I have those options checked. Each take 'deletes' the previous take. I'm left with an additional empty take lane, and only the most recent take contains an actual clip. Weird.
*If* you have both options ticked, then uncheck them, select apply, and re tick them, then select apply. EDIT: You want to make sure "Sound on Sound (Blend)" and "Store Takes in a Single Track" is selected. Sorry, I misread the other poster's advice...
post edited by kevo - 2012/10/01 17:39:39
|
stevec
Max Output Level: 0 dBFS
- Total Posts : 11546
- Joined: 2003/11/04 15:05:54
- Location: Parkesburg, PA
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 18:17:15
(permalink)
EDIT: You want to make sure "Sound on Sound (Blend)" and "Store Takes in a Single Track" is selected. Huh... if "Sound on Sound" was off but "Store Takes in a Single Track" on, I wonder if each successive lane's clips would be deleted, but not the lane itself, leaving only the last take. Sounds good in theory!
SteveC https://soundcloud.com/steve-cocchi http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163 SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors; Focusrite 18i6 (ASIO); Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
|
kevo
Max Output Level: -70 dBFS
- Total Posts : 1038
- Joined: 2005/06/28 15:04:27
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 18:35:52
(permalink)
stevec
EDIT: You want to make sure "Sound on Sound (Blend)" and "Store Takes in a Single Track" is selected.
Huh... if "Sound on Sound" was off but "Store Takes in a Single Track" on, I wonder if each successive lane's clips would be deleted, but not the lane itself, leaving only the last take. Sounds good in theory!
The difference will be that previous takes will auto mute with "Overwrite" and all takes will play with "Sound on Sound". I just noticed you must also have "Create New Layer on Overlap" Sonar X1 in Sonar X2 it would be "Create New Lanes on Overlap" toggled as well. This is probably why the OP is having problems.
post edited by kevo - 2012/10/01 18:55:49
|
Crg
Max Output Level: 0 dBFS
- Total Posts : 7719
- Joined: 2007/11/15 07:59:17
- Status: offline
Re:Take lanes - what am I doing wrong?
2012/10/01 19:08:08
(permalink)
Where's the original take?
|