This is Going to be an Odd Question...

Author
duceirae
Max Output Level: -90 dBFS
  • Total Posts : 27
  • Joined: 2015/03/24 16:02:40
  • Status: offline
2017/10/04 05:18:32 (permalink)

This is Going to be an Odd Question...

Ok so I have an odd question about what ifs...so here is the scenario, My brother and I do a haunted house every year at his place and its been getting bigger and better all the time.. (lots of money invested to build this thing). So in years past we have gone around with a hand held camera to capture the event.  
 
this year we are putting in cameras and speakers through out the haunted house.. this is semi indoors.. and we live in the Pacific northwest where it can rain a lot.. since its not a permanent structure its not water proof. basically I was thinking of getting some cheap through away mics and run them to my x32 mixer to record the audio from different rooms and feed out audio to speakers from different sources with different locations.
 
So basicly my question is should I be concerned with water messing up my board or the pres in the board in anyway, if water damages the mics... im not an electrical guy so Im not sure.. on a side note im also thinking of getting some cheap home recivers to power smaller speakers, or using some cheap home theaters.. so some feedback on that could be helpfull too... 
 
thanks for any help

Use whatever works to make it happen.
My Rig
-
intel i7 4930K (water cooled)
Nivida Geforce GTX 980sc (x2 cards)
MSI Mother board
64 Gigs of DDR4 Ram
Multiple SSD Drives in Raid for speed 
Focusrite 18i20 Interface
Sonar Platinum 
Adobe CC (Everything they offer)
Fruity Loops, Reason, Ableton Live, Blender, Toon Boom Studio, Davinci Resolve.
 
#1

10 Replies Related Threads

    Cactus Music
    Max Output Level: 0 dBFS
    • Total Posts : 8424
    • Joined: 2004/02/09 21:34:04
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/04 14:34:49 (permalink)
    Can't you put the mixer in a dry location? Like in a van or car parked nearby? 
    For these things normally you'd be wanting 70Volt system so you can use lighter gauge wire.  
    One 70 volt 100 watt amp can drive a lot of speakers. But the speakers need to also be 70 volt. 
     
    The other thing comes to mind is using bluetooth speakers. 
    If you put mikes in light weight plastic bags they will stay dry. Sound is not altered much by thin plastic. Speakers can go inside bags too. 
     

    Johnny V  
    Cakelab  
    Focusrite 6i61st - Tascam us1641. 
    3 Desktops and 3 Laptops W7 and W10
     http://www.cactusmusic.ca/
     
     
    #2
    duceirae
    Max Output Level: -90 dBFS
    • Total Posts : 27
    • Joined: 2015/03/24 16:02:40
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/04 16:38:08 (permalink)
    Yeah the mixer will be in the house. (The real house, so dry area) Sorry thought I said that in the post guess I didnt. My question is like just say worst case scenario here. Mic falls into a puddle while the board is on.. am I in danger of damaging my x32 board?

    Use whatever works to make it happen.
    My Rig
    -
    intel i7 4930K (water cooled)
    Nivida Geforce GTX 980sc (x2 cards)
    MSI Mother board
    64 Gigs of DDR4 Ram
    Multiple SSD Drives in Raid for speed 
    Focusrite 18i20 Interface
    Sonar Platinum 
    Adobe CC (Everything they offer)
    Fruity Loops, Reason, Ableton Live, Blender, Toon Boom Studio, Davinci Resolve.
     
    #3
    Cactus Music
    Max Output Level: 0 dBFS
    • Total Posts : 8424
    • Joined: 2004/02/09 21:34:04
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/04 18:47:23 (permalink)
    Do not use any mikes that require Phantom power!! That would definatly fry a channel strip. Trust me on that one. I have had 3 cases of loosing channel strips due to Phantom power mishaps. 
    Personally I would borrow a less expensive analog mixer for the task. 

    Johnny V  
    Cakelab  
    Focusrite 6i61st - Tascam us1641. 
    3 Desktops and 3 Laptops W7 and W10
     http://www.cactusmusic.ca/
     
     
    #4
    bitflipper
    01100010 01101001 01110100 01100110 01101100 01101
    • Total Posts : 26036
    • Joined: 2006/09/17 11:23:23
    • Location: Everett, WA USA
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/04 19:20:50 (permalink)
    Cactus Music
    Personally I would borrow a less expensive analog mixer for the task. 



    That's cold.


    All else is in doubt, so this is the truth I cling to. 

    My Stuff
    #5
    Cactus Music
    Max Output Level: 0 dBFS
    • Total Posts : 8424
    • Joined: 2004/02/09 21:34:04
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/04 21:38:57 (permalink)
    Want I mean is, the x32 is a real nice piece of equipment and I'd be reluctant to expose it to a situation like this one where the system is being subject to harsh environments. I'm thinking something like a old Mackie built like a tank would be more appropriate. 

    Johnny V  
    Cakelab  
    Focusrite 6i61st - Tascam us1641. 
    3 Desktops and 3 Laptops W7 and W10
     http://www.cactusmusic.ca/
     
     
    #6
    Rbh
    Max Output Level: -52 dBFS
    • Total Posts : 2349
    • Joined: 2007/09/05 22:33:44
    • Location: Indiana
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/04 22:29:40 (permalink)
    Yea water and electronics do not generally mix well. Getting  a condenser mic wet with phantom on can definitely blow the mic and channel. You can buy weatherized outdoor speakers though. Maybe you could record with a couple of small hand held digital recorders. There are a number of used ones on Ebay in the 60.00 to 80.00 range

    I7 930 2.8 Asus PDX58D
    12 Gig
    Appollo
    CbB, Sonar Pro, Reaper, Samplitude, MixBuss
     Win7 Pro

    http://www.soundclick.com/bands/default.cfm?bandID=902832
    #7
    duceirae
    Max Output Level: -90 dBFS
    • Total Posts : 27
    • Joined: 2015/03/24 16:02:40
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/07 09:06:51 (permalink)
    what about dynamic microphones? do you think they would be sensitive enough .. or lav mics? im starting to concider maybe some wireless mic options.... idk... 

    Use whatever works to make it happen.
    My Rig
    -
    intel i7 4930K (water cooled)
    Nivida Geforce GTX 980sc (x2 cards)
    MSI Mother board
    64 Gigs of DDR4 Ram
    Multiple SSD Drives in Raid for speed 
    Focusrite 18i20 Interface
    Sonar Platinum 
    Adobe CC (Everything they offer)
    Fruity Loops, Reason, Ableton Live, Blender, Toon Boom Studio, Davinci Resolve.
     
    #8
    duceirae
    Max Output Level: -90 dBFS
    • Total Posts : 27
    • Joined: 2015/03/24 16:02:40
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/07 09:29:22 (permalink)
    I think its just gonna be easest to use digital recorders.. there cheap and many are very sensitive and I dont have to worry about messing up my board.. 
     

    Use whatever works to make it happen.
    My Rig
    -
    intel i7 4930K (water cooled)
    Nivida Geforce GTX 980sc (x2 cards)
    MSI Mother board
    64 Gigs of DDR4 Ram
    Multiple SSD Drives in Raid for speed 
    Focusrite 18i20 Interface
    Sonar Platinum 
    Adobe CC (Everything they offer)
    Fruity Loops, Reason, Ableton Live, Blender, Toon Boom Studio, Davinci Resolve.
     
    #9
    Cactus Music
    Max Output Level: 0 dBFS
    • Total Posts : 8424
    • Joined: 2004/02/09 21:34:04
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/07 17:17:59 (permalink)
    I'm curious, what are the recordings to be used for? 
    There are a lot of  small diaphram condensor mikes that run on batteries. I have a few. I also have a few Boundary mikes that pick up a fly buzzing at 100 feet, they also run on batteries. My PZM's were from Radio shack and cost something like $44 back when. 


    Johnny V  
    Cakelab  
    Focusrite 6i61st - Tascam us1641. 
    3 Desktops and 3 Laptops W7 and W10
     http://www.cactusmusic.ca/
     
     
    #10
    RSMCGUITAR
    Max Output Level: -64 dBFS
    • Total Posts : 1318
    • Joined: 2014/12/27 02:33:15
    • Location: Toronto
    • Status: offline
    Re: This is Going to be an Odd Question... 2017/10/13 04:28:21 (permalink)
    I'm also curious why you're recording. Are you recording people screaming and then amplifying that to other locations?
    #11
    Jump to:
    © 2024 APG vNext Commercial Version 5.1