Helpful ReplyThorn updated to V1.04

Author
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
2017/10/29 18:25:33 (permalink)

Thorn updated to V1.04

Not sure how many peeps have tried Thorn yet. I bought it last week.
 
Today I noticed a couple of issues. First, if the noise generator was switched on in a preset, and I turned it off, saved the project. When I reopened that project the noise generator was switched back on again. And if you changed the D slider in the Amp ADSR control, it linked to the R slider and you then had to put the R slider back where you wanted it.
 
So I checked out the Thorn product page and there was an updated installer, so I duly downloaded and installed.
 
Those issues have been fixed. Also, there is now an "Intermediate" GUI size, which is nice.
 
http://dmitrysches.com/products/thorn
 
cheers
 
andy
post edited by synkrotron - 2017/11/12 08:15:14

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#1
Bajan Blue
Max Output Level: -55 dBFS
  • Total Posts : 2029
  • Joined: 2005/09/15 20:54:56
  • Location: Barbados & Cape Town
  • Status: offline
Re: Thorn updated to V1.01 2017/10/30 12:31:21 (permalink)
Thanks Andy - didn't see this - I've used Thorn on two projects already - I like it a lot - how you getting on with it
Nigel
 

Nigel
Check out the first single from our new Album, On Top of the World
https://www.youtube.com/watch?v=PTLVCOeTcTc
 
Check out our latest videos on
http://www.youtube.com/user/DevineLie/videos
 
Check out our website
www.devinelie.com
 
#2
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
Re: Thorn updated to V1.01 2017/10/30 12:40:27 (permalink)
Hi Nigel

I'm enjoying Thorn so far... Still very much in the experimental stage playing around with the presets.

I personally think it's a bargain at the moment... Three oscs and a noise generator... Lots of ways to mess with wave forms and some great modulation options.

Cheers

andy

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#3
Mitch_I
Max Output Level: -86 dBFS
  • Total Posts : 212
  • Joined: 2003/11/09 12:03:19
  • Status: offline
Re: Thorn updated to V1.01 2017/11/03 19:11:08 (permalink)
I think I've found a Sonar-related problem in Thorn.
 
I found that when I was recording with it, I got duplicate notes. I checked the Insert Soft Synths Options dialog and found that "Enable MIDI Output" was checked by default. When I initiated Thorn with this option unchecked, I got no duplicate notes.
 
In the Sonar 2701.01 update notes, I found this:
 
"Enable MIDI Output no longer displays in the Default Soft Synth Options. This depends on the synth and cannot be configured as a default but previously appeared as an option."
 
Does this point to a problem with Thorn's implementation?
 
Is anybody else seeing this?
 
Mitch I.
#4
Bajan Blue
Max Output Level: -55 dBFS
  • Total Posts : 2029
  • Joined: 2005/09/15 20:54:56
  • Location: Barbados & Cape Town
  • Status: offline
Re: Thorn updated to V1.01 2017/11/03 19:25:28 (permalink)
I hadn't noticed this problem and I have recorded a few bits with Thorn  - I'll have a look over the weekend and see if this is a problem for my set up
Nigel
 

Nigel
Check out the first single from our new Album, On Top of the World
https://www.youtube.com/watch?v=PTLVCOeTcTc
 
Check out our latest videos on
http://www.youtube.com/user/DevineLie/videos
 
Check out our website
www.devinelie.com
 
#5
gustabo
Max Output Level: -49.5 dBFS
  • Total Posts : 2591
  • Joined: 2009/01/05 17:32:38
  • Status: offline
Re: Thorn updated to V1.01 2017/11/03 23:03:06 (permalink) ☄ Helpfulby synkrotron 2017/11/04 04:31:32
Thorn is up to v1.0.3 now


Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/

#6
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
Re: Thorn updated to V1.01 2017/11/04 04:32:27 (permalink)
Thanks Bob

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#7
Mitch_I
Max Output Level: -86 dBFS
  • Total Posts : 212
  • Joined: 2003/11/09 12:03:19
  • Status: offline
Re: Thorn updated to V1.01 2017/11/04 15:22:18 (permalink)
I've tried some more things, and I can revise my original post.
 
Thorn isn't my only synth that defaults to "Enable MIDI Output" checked. But it's the only one that records duplicate notes when I leave it checked.  I'm using Thorn 1.0.3.
 
Is anybody else seeing this?
#8
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
Re: Thorn updated to V1.01 2017/11/04 16:54:03 (permalink)
Hiya Mitch,
 
I tried some recording of MIDI on V1.01 and, yes, that did double up on notes. Also, because I had another instance of Thorn, with a MIDI track, and the notes on that track were recorded onto the one armed for recording. Enable MIDI Output was ticked.
 
I then updated to V1.03 and all seems okay now, even with Enable MIDI Output ticked.

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#9
Mitch_I
Max Output Level: -86 dBFS
  • Total Posts : 212
  • Joined: 2003/11/09 12:03:19
  • Status: offline
Re: Thorn updated to V1.01 2017/11/04 22:06:12 (permalink)
Synkrotron,
 
Thanks for the input. Seems strange that v1.0.3 solved it for you but not for me.
 
Mitch
#10
Bajan Blue
Max Output Level: -55 dBFS
  • Total Posts : 2029
  • Joined: 2005/09/15 20:54:56
  • Location: Barbados & Cape Town
  • Status: offline
Re: Thorn updated to V1.01 2017/11/07 15:08:40 (permalink)
OK sorry re delay got caught up on some re-recording over the weekend!!
 
Just tried Thorn v1.01 - double midi recording as reported.
Updated to v1.03 and all now seems OK
Hope this helps
Nigel
 

Nigel
Check out the first single from our new Album, On Top of the World
https://www.youtube.com/watch?v=PTLVCOeTcTc
 
Check out our latest videos on
http://www.youtube.com/user/DevineLie/videos
 
Check out our website
www.devinelie.com
 
#11
Mitch_I
Max Output Level: -86 dBFS
  • Total Posts : 212
  • Joined: 2003/11/09 12:03:19
  • Status: offline
Re: Thorn updated to V1.01 2017/11/11 19:15:08 (permalink) ☄ Helpfulby synkrotron 2017/11/12 08:14:02
Thorn has just been updated to 1.0.4. Dmitry has resolved the issue of recording duplicate notes when "Enable MIDI Output" is checked by adding an option to Thorn to disable MIDI output. There are other changes in 1.0.4 also, including adjusting the polyphony method to try to prevent sustained notes from being stopped.
#12
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
Re: Thorn updated to V1.01 2017/11/12 08:14:28 (permalink)
Thanks Mitch, I will update the title of the OP

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#13
Jump to:
© 2024 APG vNext Commercial Version 5.1