MondoArt
Max Output Level: -86 dBFS
- Total Posts : 226
- Joined: 2011/11/29 18:51:10
- Location: Toronto
- Status: offline
Tranzport with SPLAT and Win10
I upgraded to Windows 10 Home (64-bit) in the summer, and at the time, installed the driver for my Tranzport, and everything was working fine. Then upgraded to SPLAT, again, everything fine.
I haven't used the studio in sometime, but over the weekend, I started a new song. Now, for some reason, Tranzport shows up as a controller in SPLAT, and the device shows the current timecode and track in its display, but none of the controls work. I reinstalled the driver, and testing again and it seemed to work OK.
But started up SPLAT again today, and same issue. I reinstalled the driver again, and still no control from the Tranzport.
Anyone else experiencing this?
Thanks, any replies are appreciated.
Neel Songwriter/Producer neelmodi.com Sonar Platinum | Intel i5 | Windows 10 Home | Focusrite Scarlett 2i4 | Akai Advance 61 | NI Komplete 10
|
bbach
Max Output Level: -88 dBFS
- Total Posts : 116
- Joined: 2003/11/21 09:28:54
- Status: offline
Re: Tranzport with SPLAT and Win10
2016/11/22 20:03:26
(permalink)
I'm still on Win7. After the last update Tranzport was playing midi notes instead of transport control usual stuff. When I checked under Control Surfaces I found the Inport had changed to another device. After I changed it back to Tranzport all was well. Don't know if this could be your problem, but it might be worth rechecking.
|
MondoArt
Max Output Level: -86 dBFS
- Total Posts : 226
- Joined: 2011/11/29 18:51:10
- Location: Toronto
- Status: offline
Re: Tranzport with SPLAT and Win10
2016/11/23 08:06:47
(permalink)
I did check the MIDI settings, and it shows up just fine as a controller in SPLAT. As far as SPLAT is concerned, it's working, but pressing the buttons just doesn't trigger anything. I also tried deleting the controller and re-inserting it, but that didn't help.
Anything else I can check?
Neel Songwriter/Producer neelmodi.com Sonar Platinum | Intel i5 | Windows 10 Home | Focusrite Scarlett 2i4 | Akai Advance 61 | NI Komplete 10
|
joegab
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2003/11/08 18:42:43
- Location: Italy
- Status: offline
Re: Tranzport with SPLAT and Win10
2016/11/23 09:26:42
(permalink)
Sorry, I don't understand clearly: I don't know what is SPLAT.
Anyway Tranzport is working well here (win 10 x64). After installing it I get Tranzport midi IN and OUT available that MUST be enabled in Sonar midi preferences.
Given that, in Control Surface preferences I set Tranzport (in and out) and that's all.
Further there is in the Tools menu the way to tweak something more... (a small interface is shown allowing to change some details).
Giorgio
|
bitSync
Max Output Level: -83 dBFS
- Total Posts : 357
- Joined: 2004/01/03 14:36:36
- Location: Baltimore, MD, USA
- Status: offline
Re: Tranzport with SPLAT and Win10
2016/11/23 10:35:58
(permalink)
joegab
Anyway Tranzport is working well here (win 10 x64).
Giorgio
Giorgio, This is good news. One of the things holding me back from Windows 10 was whether my beloved Tranzport would work with the OS. Sounds like it will. Oh, and SPLAT = SONAR Platinum.
Win7 Pro x64 SP1 / SONAR Platinum x64 (latest) / Mackie d8b + D8Bridge x32 v1.1 = MCU DAW Controller / Frontier TranzPort DAW Controller / Studiocat 3.20 GHz Intel i7 950, 24 GB DDR3 1600 RAM, Gigabyte GA-X58A-UD3R 2.0 Mainboard, 2TB SATA3 SSD / NVIDIA GeForce 9500 GT v341.95 / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / 24 bit at 44.1 / New Belgium 1554 / My Stuff
|
fireberd
Max Output Level: -38 dBFS
- Total Posts : 3704
- Joined: 2008/02/25 14:14:28
- Location: Inverness, FL
- Status: offline
Re: Tranzport with SPLAT and Win10
2016/11/23 10:42:14
(permalink)
My Tranzport works perfect in Win 10. I had to install it in a Vista (maybe Win 7) compatibility mode and I had to set my footswitch for "Record" in the Sonar Tranzport setup but other than that all works as it did in Windows 7 and Windows 8.1. I have Sonar Platinum.
"GCSG Productions" Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors, Ozone 5, Studio One 4.1 ISRC Registered Member of Nashville based R.O.P.E. Assn.
|
joel77
Max Output Level: -81 dBFS
- Total Posts : 489
- Joined: 2004/01/14 11:47:08
- Status: offline
Re: Tranzport with SPLAT and Win10
2016/11/23 11:09:54
(permalink)
I occasionally have the Tranzport freeze up on my Win 7 DAW. I've found that shutting down the computer and restarting it seems to reboot the Tranzport for me.
Joel Glaser Studio 52 God Bless America ----------------------------------------------------------------------------- Sonar x64, Win 7 Pro, Gigabyte GA-X58A-UD3R, Intel i7-930 2.86GHz dual quad core, 12GB Corsair DDL3, Asus ATI Radion HD 4350, WD 500 GB SATA, Dual WD 1TB SATA HDs, ME RayDAT, Alesis HD24XR - A/D-D/A https://www.facebook.com/...dio-52/811309178917929www.thebrothersglaser.com
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re: Tranzport with SPLAT and Win10
2016/11/23 11:25:24
(permalink)
joegab
Sorry, I don't understand clearly: I don't know what is SPLAT.
Giorgio
Seriously? It's the adopted form of SONAR PLATinum. It's been spoken as that (almost) since it's introduction in Jan 2015. I see you don't get out much. 
|
MondoArt
Max Output Level: -86 dBFS
- Total Posts : 226
- Joined: 2011/11/29 18:51:10
- Location: Toronto
- Status: offline
Re: Tranzport with SPLAT and Win10
2016/11/24 17:35:14
(permalink)
Tried it again tonight and Tranzport works fine now. Not sure if this will continue, because really nothing changed. We'll see....
Neel Songwriter/Producer neelmodi.com Sonar Platinum | Intel i5 | Windows 10 Home | Focusrite Scarlett 2i4 | Akai Advance 61 | NI Komplete 10
|