Helpful ReplyUsing Input 3L/Mono

Author
Post
Essentials Only Full Version
clontarf
Max Output Level: -90 dBFS
  • Total Posts : 10
  • Joined: 2012/01/07 19:26:38
  • Status: offline
2012/01/07 19:40:36 (permalink)

Using Input 3L/Mono

Hi,
I want to use the VS100 live as a mixer (in stand alone mode, not connected to computer) - I am connecting 3 mono signals.
 
I can connect signal 1 to input 1L; signal 2 to input 2L and signal 3 to input 3L (mono).
 
The signal going into 3L is line level - so no need for pre-amp.
 
I have no issue with signal 1 and signal 2 - as both these channels have pan pots - so I can center these signals across output 1 and 2 .
 
My concern is for signal 3.  This channel does not have pan pot.  How will VS100 output this signal?  Will it output the signal on Output 1 only?  Or will VS100 center the mono signal across Output 1 and Output 2?
 
Regards,
Clontarf
#1
List Solutions Only

2 Replies Related Threads
    M@ B
    Max Output Level: -68 dBFS
    • Total Posts : 1128
    • Joined: 2010/01/05 20:54:54
    • Status: offline
    Re:Using Input 3L/Mono 2012/01/08 01:20:44 (permalink) ☄ Helpful
    Hi clontarf, welcome. If you plug into input 3left-mono, the output will come from both outs. If you plug into input 4, the output will only come from output 2(right). ---------------------- EDIT: But if you were to plug into both inputs 3 and 4 with two separate mono sources (say 2 synths for example), they would each come out of only one output (in3-output1, in4-output2). Hope that helps.
    post edited by M@ B - 2012/01/08 01:28:48

    #2
    clontarf
    Max Output Level: -90 dBFS
    • Total Posts : 10
    • Joined: 2012/01/07 19:26:38
    • Status: offline
    Re:Using Input 3L/Mono 2012/01/08 05:53:58 (permalink)
    Perfect - I want to hear my mono signal into input 3L from both Output 1 and Output 2.  This is the functionality I want / expect. 
     
    Thanks
    #3
    Jump to:
    © 2024 APG vNext Commercial Version 5.1