JSchneyer
Max Output Level: -90 dBFS
- Total Posts : 4
- Joined: 2011/08/16 15:42:15
- Status: offline
Using Izotope RX 6 in Sonar Platinum
I've successfully set up RX 6 as an external audio editor in the Utilities menu. I can set up RX Monitor and Connect, but I can't seem to properly transfer audio between RX 6 and Sonar. Anyone have any suggestions, or can direct me to any videos where I can learn how to do this properly? Thanks.
|
Lance Riley [Cakewalk]
Max Output Level: -84 dBFS
- Total Posts : 337
- Joined: 2011/05/17 17:18:01
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/04/24 20:43:32
(permalink)
☄ Helpfulby Soundwise 2017/04/24 21:26:28
Lance Riley Product Manager
|
Razorwit
Max Output Level: -66 dBFS
- Total Posts : 1235
- Joined: 2003/11/05 18:39:32
- Location: SLC, UT
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/04/24 20:44:38
(permalink)
☄ Helpfulby Caa2 2017/04/25 16:00:19
Hi JSchneyer,
Here's how I do it:
Right click the clip I'd like to edit
Choose "Process Effect", then RX Connect
Select either "Repair" or "Reference", and click OK
The clip is then transferred to RX where I make my edits
To get it back in Sonar:
Click "Send Back" in RX - RX will tell you it's waiting for RX Connect
In Sonar, again right click the clip and choose "Process Effect" and RX Connect - the clip will appear inside the RX Connect box
Choose OK
Hope that helps
Dean
Intel Core i7; 32GB RAM; Win10 Pro x64;RME HDSPe MADI FX; Orion 32 and Lynx Aurora 16; Mics and other stuff...
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
.
post edited by Caa2 - 2017/04/25 16:00:31
|
THambrecht
Max Output Level: -73 dBFS
- Total Posts : 867
- Joined: 2010/12/10 06:42:03
- Location: Germany
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/04/24 21:01:08
(permalink)
☄ Helpfulby Caa2 2017/04/25 16:00:23
Or try this. this working in my case:
Mark clip or section in audioclip.
Right click: process effect -> audio effects -> RX6 Connect
In dialog from RX connect click "OK"
do your work in RX 6 editor
In RX6 editor: "send back"
return to SONAR --->
In Sonar: Right click: process effect -> audio effects -> RX6 Connect
In dialog from RX connect click "OK"
Ready !!
Note:
Don't click "repair". That has never worked for me.
And since RX6 the clip is split if you edit a section of the clip.
iZotope RX within the Utilieties menu has never worked for me.
We digitize tapes, vinyl, dat, md ... in broadcast and studio quality for publishers, public institutions and individuals.4 x Intel Quad-CPU, 4GHz Sonar Platinum (Windows 10 - 64Bit) and 14 computers for recording tapes, vinyl ...
4 x RME Fireface 800, 2 x Roland Octa Capture and 4 x Roland Quad Capture, Focusrite .... Studer A80, RP99, EMT948 ...
(Germany) http://www.hambrecht.de
|
JSchneyer
Max Output Level: -90 dBFS
- Total Posts : 4
- Joined: 2011/08/16 15:42:15
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/04/26 20:26:37
(permalink)
Thanks for the input, guys. I'll give it a try. However, I think Lance misunderstood my inquiry as I had already successfully set up RX6 as an external editor, using the same information he provided.
|
mcgooze
Max Output Level: -85 dBFS
- Total Posts : 255
- Joined: 2003/11/08 21:10:58
- Location: Indianapolis, IN
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/04/27 01:58:28
(permalink)
I set up RX6 in the utilities menu per Lance's instructions and it works great (thanks Lance!). I've tried using the RX Connect, and it also works, but it seems like a LOT of extra steps compared to simply selecting a clip and then sending it to RX via the utilities menu. Am I missing some cool advantage to using RX Connect? (I hope this isn't considered hijacking... it seems pertinent, I think).
|
mcgooze
Max Output Level: -85 dBFS
- Total Posts : 255
- Joined: 2003/11/08 21:10:58
- Location: Indianapolis, IN
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/04/27 13:09:59
(permalink)
Actually, instead of trying to (not) hijack the thread, I suppose I could've tried to be helpful to the OP...
JSchneyer- Since it is listed in your Utilities menu, it should work. Have you tried selecting the clip you want to edit & then selecting RX6 from the Utilities menu? When you do that, it should launch RX6 & load the clip. Perform your edits & then choose "overwrite original file" from RX6's file menu. Then return to Sonar & it should ask you if you want to reload the file. Say yes. (On my system, if I stay in RX6 too long, Sonar may appear to forget the clip & not ask if you want to reload it. My workaround is to do a few quick edits, reload to Sonar & then return to RX6 for more as needed).
|
Razorwit
Max Output Level: -66 dBFS
- Total Posts : 1235
- Joined: 2003/11/05 18:39:32
- Location: SLC, UT
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/04/27 14:08:01
(permalink)
☄ Helpfulby mcgooze 2017/04/27 15:56:58
mcgooze
I set up RX6 in the utilities menu per Lance's instructions and it works great (thanks Lance!). I've tried using the RX Connect, and it also works, but it seems like a LOT of extra steps compared to simply selecting a clip and then sending it to RX via the utilities menu. Am I missing some cool advantage to using RX Connect? (I hope this isn't considered hijacking... it seems pertinent, I think).
Hi Greg, I don't know of any particular advantage to using RX Connect, just different ways of skinning the same cat I think. Dean
Intel Core i7; 32GB RAM; Win10 Pro x64;RME HDSPe MADI FX; Orion 32 and Lynx Aurora 16; Mics and other stuff...
|
vanceen
Max Output Level: -74 dBFS
- Total Posts : 814
- Joined: 2003/11/08 08:55:56
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/09/27 23:25:52
(permalink)
I use RX6 a lot, always going through the whole routine wih RX Connect. It usually works fine, although very lately I've found that it sometimes (not always) creates a second track lane with the modified audio instead of substituting the audio I selected with the new audio.
When I do the registry edit as described in the knowledge base, RX 6 shows up in the Utilities menu, but it doesn't work. That is, I select a clip, then select RX6 from Utilities. SONAR then tells me it is copying a file. When that finishes, I get the message "Could not create process". RX 6 opens, but there is no wave in the window, just a flat line.
Has anyone solved this?
SONAR Platinum Windows 10 ASUS X99E WE Core i7 5960X 32 GB Corsair DDR4 2133 C13 Fireface UFX USB driver 1.098 GeForce GTX 950
|
vanceen
Max Output Level: -74 dBFS
- Total Posts : 814
- Joined: 2003/11/08 08:55:56
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/09/29 22:34:56
(permalink)
So no one else has had the "Cannot create process" message?
SONAR Platinum Windows 10 ASUS X99E WE Core i7 5960X 32 GB Corsair DDR4 2133 C13 Fireface UFX USB driver 1.098 GeForce GTX 950
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/09/29 22:39:57
(permalink)
I do not have RX6 but when launching a program from the utilities menu throws a "Cannot create process" message often times it is a permissions issue. For example, if the program being launched wants to run as administrator and SONAR is not running as administrator Windows will not allow the process to be created.
|
vanceen
Max Output Level: -74 dBFS
- Total Posts : 814
- Joined: 2003/11/08 08:55:56
- Status: offline
Re: Using Izotope RX 6 in Sonar Platinum
2017/09/30 00:17:39
(permalink)
Thanks scook. I found a thread on the Internet that discusses that.
Unfortunately, it didn't help. SONAR is set to run as administrator. Switching the administrator setting for RX 6 (and Sound Forge) back and forth didn't seem to help.
SONAR Platinum Windows 10 ASUS X99E WE Core i7 5960X 32 GB Corsair DDR4 2133 C13 Fireface UFX USB driver 1.098 GeForce GTX 950
|