Cakewalk by BandLab
Prev Thread
Next Thread

Helpful ReplyUsing Platinum With RME UFX

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
DPete
Max Output Level: -90 dBFS
  • Total Posts : 27
  • Joined: 10/2/2011
  • Location: Minnesota
  • Status: offline
Re: Using Platinum With RME UFX September 09, 16 3:08 PM (permalink)
Been using the UFX for several years now. Previous interface was EMU 1820m. Sounded good, but once I swapped it out for the UFX, I realized what I was missing. Crystal clear converters dropped the noise floor down to nothing. Learning curve with TotalMix was steep, but once I figured it out the possibilities with ins/outs are endless. Setting up workspaces and snapshots for my use helped a lot. Added the OctaMic II for an additional 8 channels so I could record drums. Very satisfied with performance of the UFX.


DPete

Sonar Platinum / Win10 Pro / RME Fireface UFX / RME Octamic II / Focal CMS65 / PCR-800 / ASUS Sabertooth Z97 Mark 1 / Intel Core i7-4790 / 32GB G.SKILL Ripjaws
#31
bbach
Max Output Level: -88 dBFS
  • Total Posts : 116
  • Joined: 11/21/2003
  • Status: offline
Re: Using Platinum With RME UFX September 09, 16 9:17 PM (permalink)
Another thumbs up for the UFX. TotalMix is a tad confusing at first and adds an additional layer of confusion if you use a mixer, but it also gives an enormous amount of flexibility. I have been having difficulty with the RME forum lately on my iPad. ( Haven't tried it on my Windows machines) Their tech support thinks it has something to do with IPV6 and recommended turning it off, but there is no such option in IOS. UFX can be run as "class compliant mode" meaning it can be run without drivers if you want to use it with an IOS device.
#32
Muziekschuur at home
Max Output Level: -62 dBFS
  • Total Posts : 1442
  • Joined: 3/1/2006
  • Status: offline
Re: Using Platinum With RME UFX September 10, 16 4:08 AM (permalink)
It does NOT make coffee!!!  Flawed!!

Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24.  M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport.
Remote recording Alesis HD-24 & Phonic MRS 1-20.
P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks)
Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram
 Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
#33
gswitz
Max Output Level: -18.5 dBFS
  • Total Posts : 5694
  • Joined: 6/16/2007
  • Location: Richmond Virginia USA
  • Status: offline
Re: Using Platinum With RME UFX September 10, 16 8:08 AM (permalink) ☄ Helpfulby karhide September 10, 16 11:02 AM
If you have one, don't forget to explore digicheck software (free download) from RME. It's very useful.

StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen.
I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
#34
Page: < 12 Showing page 2 of 2
Home » [Cakewalk Products] » SONAR » Using Platinum With RME UFX
Jump to:
© 2025 APG vNext Commercial Version 5.1