V-700c - Reinstall on new machine - can't get Console to show up in Controller/Surface

Author
dmacfadgen@quarterback.ca
Max Output Level: -90 dBFS
  • Total Posts : 11
  • Joined: 2015/01/25 23:19:47
  • Status: offline
2018/02/20 05:42:34 (permalink)

V-700c - Reinstall on new machine - can't get Console to show up in Controller/Surface

Need some help...
Have a new Windows 7 machine, Platinum, V-700c and V-700r(two).
Loaded everything, the r's are working fine but when I go to set up my console in preferences it is not showing up as a choice.
Would that be something that used to be in Sonar and is no longer there or should that come from the driver?
1. If no longer there, would I go back to an old version and then bring Platinum back?
2. If its in the driver... I've loaded the driver sets for versions 1, 2.0 and 2.1... to no avail.
 
Be great if someone could tell me what I'm missing.
Thanks!
D.
#1

7 Replies Related Threads

    Rob[at]Sound-Rehab
    Max Output Level: -47 dBFS
    • Total Posts : 2819
    • Joined: 2011/02/03 04:31:35
    • Location: Sound-Rehab, Austria
    • Status: offline
    Re: V-700c - Reinstall on new machine - can't get Console to show up in Controller/Surface 2018/02/20 13:53:58 (permalink)
    have you connected the VS700C via USB? then you need to install the VS700C driver as well ...
     
    if connected via VS700R, make sure the dip switch is in the right place (likewise for use via USB but opposite position)

    GOOD TUNES LAST FOREVER
      +++   Visit the Rehab   +++
     
    DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
    Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
    VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
    #2
    dmacfadgen@quarterback.ca
    Max Output Level: -90 dBFS
    • Total Posts : 11
    • Joined: 2015/01/25 23:19:47
    • Status: offline
    Re: V-700c - Reinstall on new machine - can't get Console to show up in Controller/Surface 2018/02/20 14:33:18 (permalink)
    No, the v700c connects to the master v700r with a dedicated cable. Actually, just after I posted(about 2:00am), I found the set up file for the console. It was mentioned in some of the driver documentation but never with a working link. All good... have breathed new life into my V700 system following an ill-fated attempt at integrating disparate technologies with a early stage DAW. Hopefully over the next 2-3 years one manufacturer can put something together that is as good as Sonar/V-700!
    Thanks for your help!
    D.
    #3
    dmacfadgen@quarterback.ca
    Max Output Level: -90 dBFS
    • Total Posts : 11
    • Joined: 2015/01/25 23:19:47
    • Status: offline
    Re: V-700c - Reinstall on new machine - can't get Console to show up in Controller/Surface 2018/02/21 16:42:16 (permalink)
    No, the v700c connects to the master v700r with a dedicated cable. Actually, just after I posted(about 2:00am), I found the set up file for the console. It was mentioned in some of the driver documentation but never with a working link. All good... have breathed new life into my V700 system following an ill-fated attempt at integrating disparate technologies with a early stage DAW. Hopefully over the next 2-3 years one manufacturer can put something together that is as good as Sonar/V-700!
    Thanks for your help!
    D.
    #4
    louisodwyer
    Max Output Level: -90 dBFS
    • Total Posts : 16
    • Joined: 2010/07/07 18:02:46
    • Location: Crozet 01170, France
    • Status: offline
    Re: V-700c - Reinstall on new machine - can't get Console to show up in Controller/Surface 2018/03/06 12:08:54 (permalink)
    I presume you downloaded the VS-700 control surface plugin (CSP) file from Cakewalk?

    Current equipment:
    VS700 Studio, of course!
    PC: Fully loaded. Quad-core with 4 HDDs in 2 X raid0 for performance
    Keys: Korg M3 - Korg Z1  - Korg Wavestation - Yamaha Stage Piano
    Guitars: US Fender Strat - Gibson Robot - US Fender Telecaster - Gretsch Orange Blossom Special - Taylor steel acoustic - Little Martin acoustic - Takemine P3DC 12-string - Greg Bennett nylon acoustic - old mandolin
    #5
    dmacfadgen@quarterback.ca
    Max Output Level: -90 dBFS
    • Total Posts : 11
    • Joined: 2015/01/25 23:19:47
    • Status: offline
    Re: V-700c - Reinstall on new machine - can't get Console to show up in Controller/Surface 2018/03/06 12:15:34 (permalink)
    Yes, everything working beautifully. Thanks!
    #6
    mgs6270
    Max Output Level: -90 dBFS
    • Total Posts : 10
    • Joined: 2016/12/09 14:09:44
    • Status: offline
    Re: V-700c - Reinstall on new machine - can't get Console to show up in Controller/Surface 2018/03/10 23:45:31 (permalink)
    is there a firmwear update for the 700c? I just moved some stuff around in the studio and now my console is not working. reinstalled drivers and still nothing. was working fine last week and now it is dead. any ideas of what the hell is going on?
     
    #7
    mgs6270
    Max Output Level: -90 dBFS
    • Total Posts : 10
    • Joined: 2016/12/09 14:09:44
    • Status: offline
    Re: V-700c - Reinstall on new machine - can't get Console to show up in Controller/Surface 2018/03/11 00:03:09 (permalink)
    btw, running windows 7 and sonar professional..sorry left that out.
    any help would be great.
    thanks,
    Mitch
    #8
    Jump to:
    © 2019 APG vNext Commercial Version 5.1