Helpful ReplyVS-100 / Windows 10 April 2018 Update Warning

Author
TerraSin
Max Output Level: -55.5 dBFS
  • Total Posts : 1975
  • Joined: 2005/08/05 00:27:13
  • Location: USA
  • Status: offline
2018/05/01 17:05:59 (permalink)

VS-100 / Windows 10 April 2018 Update Warning

I updated yesterday to 1803 which is a fairly large update. My VS-100 is working on the audio output side but my inputs have stopped working and I can no longer use my mics. I'll be doing some troubleshooting the next few days to figure out what is going on. Not too concerned myself since I don't use the 100 in the studio but thought to post a warning for people who still might that you might want to hold off updating if you need the inputs. Windows has changed a lot of things around with this update including the sound settings.
#1
Whistlekiller
Max Output Level: -90 dBFS
  • Total Posts : 46
  • Joined: 2013/01/31 04:40:44
  • Location: North Lincolnshire
  • Status: offline
Re: VS-100 / Windows 10 April 2018 Update Warning 2018/05/01 22:56:55 (permalink)
Thanks for that. Worth knowing in advance. have you tried a roll-back?

X11 i7 3770-3.4Ghz, 32Gb RAM, Win 10 Pro 64 Bit, Sonar Platinum, V-Studio 100, V-Contol 1.9 iPad, Omnisphere Power Synth, Alesis V61 Keyboard, Novation Launch Control, Roland JV1010 Synth, Roland GR55 Guitar Synth, Line 6 Pod with floorboard, Shure PG42 Mic, 4 guitars, 5 string bass, upright bass, ukelele, mandolin, Cambridge SoundWorks THX Speakers, M-Audio Speakers
#2
TerraSin
Max Output Level: -55.5 dBFS
  • Total Posts : 1975
  • Joined: 2005/08/05 00:27:13
  • Location: USA
  • Status: offline
Re: VS-100 / Windows 10 April 2018 Update Warning 2018/05/01 23:59:51 (permalink)
Not worried about a roll back since this isn't my studio computer. Will likely just dump the 100 as the interface on this computer if I can't get it working and just use the onboard audio.
#3
TerraSin
Max Output Level: -55.5 dBFS
  • Total Posts : 1975
  • Joined: 2005/08/05 00:27:13
  • Location: USA
  • Status: offline
Re: VS-100 / Windows 10 April 2018 Update Warning 2018/05/05 06:57:03 (permalink) ☄ Helpfulby jimfogle 2018/05/05 21:50:08
Go into the settings on the start menu. Then go to Privacy. Then to Microphone and allow apps to access your microphone. That fixed it for me.
#4
dahjah
Max Output Level: -84 dBFS
  • Total Posts : 312
  • Joined: 2010/07/31 13:56:51
  • Location: Ontario
  • Status: offline
Re: VS-100 / Windows 10 April 2018 Update Warning 2018/05/10 00:52:37 (permalink)
good to know, I use the 100 as my mobile recorder with my laptop. But for now laptop is win 7

Windows 8.1 Pro X64 Sonar Platinum x64
Processor - AMD FX 8350 Eight Core Processor 4GB
32 GB Memory
VS 700 System 
Focusrite Liquid Saffire 56
(Focusrite is only on when recording)
#5
Whistlekiller
Max Output Level: -90 dBFS
  • Total Posts : 46
  • Joined: 2013/01/31 04:40:44
  • Location: North Lincolnshire
  • Status: offline
Re: VS-100 / Windows 10 April 2018 Update Warning 2018/05/22 13:27:12 (permalink)
I finally got round to updating Windows10 to 1803 today and thankfully it hasn't caused any problems with my VS-100 either on inputs or outputs which is a bit of a relief after reading the above! Not only that, my PC is noticeably quicker to respond and Cakewalk by BandLab (and my old Sonar Platinum for that matter) loads a lot faster. I might treat myself to a beer!

X11 i7 3770-3.4Ghz, 32Gb RAM, Win 10 Pro 64 Bit, Sonar Platinum, V-Studio 100, V-Contol 1.9 iPad, Omnisphere Power Synth, Alesis V61 Keyboard, Novation Launch Control, Roland JV1010 Synth, Roland GR55 Guitar Synth, Line 6 Pod with floorboard, Shure PG42 Mic, 4 guitars, 5 string bass, upright bass, ukelele, mandolin, Cambridge SoundWorks THX Speakers, M-Audio Speakers
#6
Jump to:
© 2018 APG vNext Commercial Version 5.1