keneds
Max Output Level: -76 dBFS
- Total Posts : 725
- Joined: 2008/10/16 22:49:51
- Location: West Grove PA.
- Status: offline
VS-700 and Bandlab version 1.0
How will we fare as this develops?
SONAR Platinum
Dell XPS17 / External 23" touch screen & 22" HP displays/Windows 10 64bit i5 processor/
8Gb ram/500GB (7200rpm SATA HD)/Roland VS-700 set/KRK rockit 6/KRK 10" sub and a bunch of cables
EZdrummer2 / EZmix2
|
BJZ
Max Output Level: -89 dBFS
- Total Posts : 87
- Joined: 2018/02/26 18:51:11
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/03/08 17:42:29
(permalink)
Are you aware that BandLab sells their own interfaces?
Why then would they care about an out of Production VS-700?
I imagine (no inside info) that however it works now it will continue to work on V1.0 of BandLab's offering. After that, WTHK.
|
keneds
Max Output Level: -76 dBFS
- Total Posts : 725
- Joined: 2008/10/16 22:49:51
- Location: West Grove PA.
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/03/08 23:30:00
(permalink)
Maybe I’m asking.....will it continue to work as updates occur. Oh and, Stick your snarky attitude up your ass.
SONAR Platinum
Dell XPS17 / External 23" touch screen & 22" HP displays/Windows 10 64bit i5 processor/
8Gb ram/500GB (7200rpm SATA HD)/Roland VS-700 set/KRK rockit 6/KRK 10" sub and a bunch of cables
EZdrummer2 / EZmix2
|
azslow3
Max Output Level: -42.5 dBFS
- Total Posts : 3297
- Joined: 2012/06/22 19:27:51
- Location: Germany
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/03/10 11:22:30
(permalink)
If it stop working, that means ACT API stop working. That it turn means that all Control Surfaces stop working.
So, they will keep it at least till they re-implement control surfaces, which is unlikely has top (if any at all) priority...
Sonar 8LE -> Platinum infinity, REAPER, Windows 10 pro GA-EP35-DS3L, E7500, 4GB, GTX 1050 Ti, 2x500GB RME Babyface Pro (M-Audio Audiophile Firewire/410, VS-20), Kawai CN43, TD-11, Roland A500S, Akai MPK Mini, Keystation Pro, etc. www.azslow.com - Control Surface Integration Platform for SONAR, ReaCWP, AOSC and other accessibility tools
|
HeatherHaze
Max Output Level: -84 dBFS
- Total Posts : 334
- Joined: 2005/07/05 09:35:40
- Location: Washington DC
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/04/04 05:48:58
(permalink)
I'm interested in hearing from BandLab on this as well.
I'm hoping SOMONE will release Windows 10 drivers for the VS-700. I know there's a hack to get the Win 8.1 drivers to work, but it sounds unreliable at best, and I don't want to base my studio on hardware that could be trashed again with the next Windows update.
)-|-( HeatherHaze http://heatherhaze.com/ "This will be our reply to violence: to make music more intensely, more beautifully, more devotedly than ever before." ~ Leonard Bernstein Cakewalk by Bandlab Studio One 3.5, Cubase 9.5 Intel Core i7 8700, 32Gb RAM Focusrite Scarlett 18i20 V-Studio VS-700 Slate Raven MTi2 Windows 10 Professional 64-bit ...and a whole bunch of other stuff.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/04/04 06:04:47
(permalink)
|
HeatherHaze
Max Output Level: -84 dBFS
- Total Posts : 334
- Joined: 2005/07/05 09:35:40
- Location: Washington DC
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/04/09 05:41:24
(permalink)
Things are looking really promising as of now. I'm up and running with Cakewalk by Bandlab, using my VS-700 console in parallel with my Slate Raven MTi2 and everything else. I finally figured out how to make the drivers work in Windows 10. It was far easier than I expected. I've disconnected the VS-700R rack unit, though. As much as I miss the Fantom VS (read: a LOT), I really don't miss the fan noise. It is still a very capable unit, but I'm using a Focusrite Scarlett 18i20 which has most of the same connectivity (minus the Fantom). Everything works and sounds great.
I'm very impressed and encouraged by Bandlab's care and dedication to Cakewalk thus far. I see only good things ahead.
)-|-( HeatherHaze http://heatherhaze.com/ "This will be our reply to violence: to make music more intensely, more beautifully, more devotedly than ever before." ~ Leonard Bernstein Cakewalk by Bandlab Studio One 3.5, Cubase 9.5 Intel Core i7 8700, 32Gb RAM Focusrite Scarlett 18i20 V-Studio VS-700 Slate Raven MTi2 Windows 10 Professional 64-bit ...and a whole bunch of other stuff.
|
poetnprophet
Max Output Level: -88 dBFS
- Total Posts : 128
- Joined: 2016/07/23 12:56:57
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/04/13 18:57:39
(permalink)
Hi, VS700 system up and running here. There was literally no difference from the day before the install. if you do the install right you won't have to do anything special to get it working.
|
rbakker
Max Output Level: -90 dBFS
- Total Posts : 6
- Joined: 2016/09/20 04:47:37
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/04/13 20:44:07
(permalink)
VS-700 system running 'fine' with Cakewalk by Bandlab under win10. Except for the regular crashes caused by the rdas1089.dll incompatibility. Will the crashes disappear if I only use the vs700console without the VS-700R rack unit?
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/04/20 15:47:24
(permalink)
Rdas1089.dll is part of the roland audio driver. So you will see your crashes go away if you use a different audio interface and just use the vs700c via USB
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
poetnprophet
Max Output Level: -88 dBFS
- Total Posts : 128
- Joined: 2016/07/23 12:56:57
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/05/16 17:43:09
(permalink)
HeatherHaze
Things are looking really promising as of now. I'm up and running with Cakewalk by Bandlab, using my VS-700 console in parallel with my Slate Raven MTi2 and everything else. I finally figured out how to make the drivers work in Windows 10. It was far easier than I expected. I've disconnected the VS-700R rack unit, though. As much as I miss the Fantom VS (read: a LOT), I really don't miss the fan noise. It is still a very capable unit, but I'm using a Focusrite Scarlett 18i20 which has most of the same connectivity (minus the Fantom). Everything works and sounds great.
I'm very impressed and encouraged by Bandlab's care and dedication to Cakewalk thus far. I see only good things ahead.
Hi Heather, I have a question for you since you are running the console without the rack. Are you able to use the headphone and/or monitor outs on the console? I'm assuming no since there is no direct connection to interface...?
|
garybrun
Max Output Level: -82 dBFS
- Total Posts : 436
- Joined: 2005/11/03 11:15:44
- Location: Norway
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/05/17 11:20:30
(permalink)
No you can not as you say.
Gary
Sonar Platinum 64bit, Win 10 64 bit, English, Intel Core i7 4960X @ 3.67GHz, ASRock Motherboard, 48GB DDR3 1600MHz, Nvidea NVS 510, Intel 750 1.2 SSD, 488GB SSD, 300GB SSD, 22TB in SATA Hardware: VS-700 set ASIO, Presonus RM32ai, Studio Live III 32, Studiolive 32R, RME Fireface 800, Matrox MX02 Rack, Roland Integra 7, Roland A-88, Edirol R-4 Pro, Focusrite Liquid Channel x 2, Jomeek Studio Channel VC1Qcs, Ultra Dyne 9024, TD30KV, Komplete 9 Ultimate, Monitors: Focal TRIO6 BE, JBL Studio Monitor 4412, SE Monroe Egg 150, Avantone x 2.
|
poetnprophet
Max Output Level: -88 dBFS
- Total Posts : 128
- Joined: 2016/07/23 12:56:57
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/05/17 20:26:50
(permalink)
Bah...ok, thanks for the tip.
Dave
|
HeatherHaze
Max Output Level: -84 dBFS
- Total Posts : 334
- Joined: 2005/07/05 09:35:40
- Location: Washington DC
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/05/18 03:21:08
(permalink)
poetnprophet
Are you able to use the headphone and/or monitor outs on the console? I'm assuming no since there is no direct connection to interface...?
I hadn't actually tried it, since I've always used an external headphone amp. But as Gary already answered, no, it doesn't work. No surprise since, as you mentioned, there's no actual audio connection. Of course that also means the AUX inputs don't work, which is also a bit of a shame. But honestly, I'd found those inputs somewhat lacking compared to going direct into the rack, anyway.
)-|-( HeatherHaze http://heatherhaze.com/ "This will be our reply to violence: to make music more intensely, more beautifully, more devotedly than ever before." ~ Leonard Bernstein Cakewalk by Bandlab Studio One 3.5, Cubase 9.5 Intel Core i7 8700, 32Gb RAM Focusrite Scarlett 18i20 V-Studio VS-700 Slate Raven MTi2 Windows 10 Professional 64-bit ...and a whole bunch of other stuff.
|
poetnprophet
Max Output Level: -88 dBFS
- Total Posts : 128
- Joined: 2016/07/23 12:56:57
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/05/18 03:31:39
(permalink)
Ah, I didn't even think of the aux input. I use that for a talkback mic only. But having the headphone controls right there with all the other controls is really nice.
If only we had some nice new drivers that were up to date and stable with lower latency and samples, that would be so sweet.
sweet dreams?
Dave
|
Moogfan
Max Output Level: -90 dBFS
- Total Posts : 4
- Joined: 2015/03/21 13:01:02
- Location: Chicago
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/05/27 01:26:26
(permalink)
I have the 700c working flawlessly in the lastest builds using Win 7 x64. Similar results when used as a Mackie surface in Vegas, Live, and Reason. Granted, I have swapped out the 700R recently for the RME 802 because I needed more I/O.
|
StephanKim
Max Output Level: -90 dBFS
- Total Posts : 38
- Joined: 2014/12/27 04:40:19
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/06/12 15:53:37
(permalink)
Where is control surface folder?
VS700 disappeared in controller/surface setting menu
|
StephanKim
Max Output Level: -90 dBFS
- Total Posts : 38
- Joined: 2014/12/27 04:40:19
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/06/13 07:39:16
(permalink)
|
poetnprophet
Max Output Level: -88 dBFS
- Total Posts : 128
- Joined: 2016/07/23 12:56:57
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/06/13 18:10:28
(permalink)
Wait, is that a new driver? That's on Cakewalk's site, not Rolands...?
|
dahjah
Max Output Level: -84 dBFS
- Total Posts : 313
- Joined: 2010/07/31 13:56:51
- Location: Ontario
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/06/14 04:21:20
(permalink)
Windows 8.1 Pro X64 Sonar Platinum x64 Processor - AMD FX 8350 Eight Core Processor 4GB 32 GB MemoryVS 700 System Focusrite Liquid Saffire 56(Focusrite is only on when recording)
|
StephanKim
Max Output Level: -90 dBFS
- Total Posts : 38
- Joined: 2014/12/27 04:40:19
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/06/14 06:29:52
(permalink)
poetnprophet
Wait, is that a new driver? That's on Cakewalk's site, not Rolands...?
newest plugin version which I found on my system is 1.4.x it included Sonar X2~X3 version. maybe.
|
poetnprophet
Max Output Level: -88 dBFS
- Total Posts : 128
- Joined: 2016/07/23 12:56:57
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/06/15 06:05:44
(permalink)
You're right, mine is version 2.02 driver. I'm still confused, I don't recall that ever being on Cakewalk's site with a direct download link.
|
dahjah
Max Output Level: -84 dBFS
- Total Posts : 313
- Joined: 2010/07/31 13:56:51
- Location: Ontario
- Status: offline
Re: VS-700 and Bandlab version 1.0
2018/06/16 15:38:37
(permalink)
I've noticed since the bandlab version when copying and pasting with the VS700 it now brings up a window and you have to reach for the mouse to click ok before it will paste. It's very annoying.
Windows 8.1 Pro X64 Sonar Platinum x64 Processor - AMD FX 8350 Eight Core Processor 4GB 32 GB MemoryVS 700 System Focusrite Liquid Saffire 56(Focusrite is only on when recording)
|