Want to set midi track Volume and Pan to "none" - how?

Author
Post
Essentials Only Full Version
larrymcg
Max Output Level: -64 dBFS
  • Total Posts : 1310
  • Joined: 2003/11/05 17:00:22
  • Location: Redding (Northern California)
  • Status: offline
2011/07/19 11:49:15 (permalink)

Want to set midi track Volume and Pan to "none" - how?

I want to set the Volume and Pan for a midi track to "none".  So when I start playback the current settings of the synth are not changed.  I'm actually using SHS7 and have decided that SHS7 always sends an initial volume and pan setting that I don't want on some tracks.

Can the more advanced versions of Sonar do what I want?

--Larry

PS:  The old and useful Pro Audio 9 allows a setting of "none".


Intel Core i7-4790 @3.6GHz; 8GB; Win10 Pro 64bit; 1TB disk + 3TB ext disk; Midiman Fineline mixer; MidiSport 4x4 midi I/F; Roland JV-30 kbd/synth; Yamaha TG55 synth; Rx with 3 piece Home audio speakers; Sonar X3e Studio
#1

3 Replies Related Threads
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re:Want to set midi track Volume and Pan to "none" - how? 2011/07/19 12:06:33 (permalink)
    Right-click each control, and choose Disable Control.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #2
    larrymcg
    Max Output Level: -64 dBFS
    • Total Posts : 1310
    • Joined: 2003/11/05 17:00:22
    • Location: Redding (Northern California)
    • Status: offline
    Re:Want to set midi track Volume and Pan to "none" - how? 2011/07/19 12:42:02 (permalink)
    brundlefly,  Thanks for that info!  It works in SHS7 too.

    I also verified that the disable/enable of the control is on a per track basis (as you would hope would be the case).  It would be nice is there was some visual indication that the control was disabled, especially in the console view where volume and pan are so plainly visible.

    I noted that in the console view, if I move the disabled volume control, it automatically enables.  I guess that makes sense.

    --Larry


    Intel Core i7-4790 @3.6GHz; 8GB; Win10 Pro 64bit; 1TB disk + 3TB ext disk; Midiman Fineline mixer; MidiSport 4x4 midi I/F; Roland JV-30 kbd/synth; Yamaha TG55 synth; Rx with 3 piece Home audio speakers; Sonar X3e Studio
    #3
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re:Want to set midi track Volume and Pan to "none" - how? 2011/07/19 12:53:53 (permalink)
    In SONAR, a disabled control will have parentheses around the value in the Track View. In 8.5.3, this was reflected in the Console view as well, but in X1, the parens are missing in the CV.


    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #4
    Jump to:
    © 2024 APG vNext Commercial Version 5.1