Westside Steve Simmons
Max Output Level: -87 dBFS
- Total Posts : 196
- Joined: 2015/01/11 15:44:22
- Status: offline
Windows 10 latest update
I have yet to install this update but I'm sure I will eventually . Has anyone done so and if you have has it caused problems with Cakewalk? Or anything?
Thanks
WSS
|
fireberd
Max Output Level: -38 dBFS
- Total Posts : 3704
- Joined: 2008/02/25 14:14:28
- Location: Inverness, FL
- Status: offline
Re: Windows 10 latest update
2018/05/13 13:20:08
(permalink)
The only problem I've come across is the default audio playback device issue that I documented on another thread. If you only use the PC for DAW work its not a problem. Until V1803, whatever was set as default audio playback device (e.g. the PC sound) stayed as default when a recording interface unit was plugged in. But, with 1803 it now automatically assigns the recording interface as the default audio playback device.
This "problem" is corrected in later OS builds. Its back to the "old" way in the latest Windows Insider advanced OS build release. Maybe someone realized the error (Hopefully).
"GCSG Productions" Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors, Ozone 5, Studio One 4.1 ISRC Registered Member of Nashville based R.O.P.E. Assn.
|
belltunes
Max Output Level: -89 dBFS
- Total Posts : 64
- Joined: 2003/11/10 18:50:53
- Status: offline
Re: Windows 10 latest update
2018/05/13 13:27:58
(permalink)
Some impact but easily fixable. Had to re-associate addictive drums via the xln installer. A couple of my Daw optimizations were reversed. Audio options other than my dedicated audio interface that I had disabled were re-enabled. Frustrating, but I am getting used to the fix it routine now after Microsoft drops their OS update bombs.
|
rbecker
Max Output Level: -76 dBFS
- Total Posts : 740
- Joined: 2006/01/20 14:32:19
- Location: Wisconsin, USA
- Status: offline
Re: Windows 10 latest update
2018/05/13 13:39:45
(permalink)
I am watching this, too. I run Windows 10 pro and have not gotten the 1803 version yet...still on 1709. I hope the issue is ironed out before I get the update.
One advantage to having Windows "Pro" is that (they claim) the updates are delayed in comparison to folks running "Home". Hope this helps me this time.
RJB -Vernon Corv "There are 10 types of people in the world...Those who understand binary and those who don't." My Songs --- Sonar Platinum HD: ST2000DM 001-1ER164 7200RPM Intel(R) Core(TM) i7-2600 CPU @3.40 Ghz RAM:12.0 GB Memory:2 drives 1 Terabyte each Windows 10 Video: NVIDA GeForce GTX 550 Ti Audio: Focusrite Scarlett 2i4
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re: Windows 10 latest update
2018/05/13 14:32:32
(permalink)
I'm current and having no issues.
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
Songroom
Max Output Level: -87 dBFS
- Total Posts : 174
- Joined: 2013/09/19 02:18:32
- Location: UK
- Status: offline
Re: Windows 10 latest update
2018/05/13 15:02:30
(permalink)
I've installed Windows 10 (version 1803 / build 17134.48) and haven't noticed any operational problems. In saying that, it's worth noting that the privacy settings are reset to Microsoft's preferred 'invasive' mode as are any custom 'services and scheduled tasks' settings.
Sonar Platinum - BandLab Cakewalk - Presonus 16.0.2 - Tannoys - Lava BandLamp ?
|
kitekrazy1
Max Output Level: -40 dBFS
- Total Posts : 3524
- Joined: 2014/08/02 17:52:51
- Status: offline
Re: Windows 10 latest update
2018/05/13 16:03:30
(permalink)
Messed up my networking. Shared and mapped drives no longer work. The settings in Windows 10 file sharing is constantly broken with each update.
Sonar Platinum, W7 Pro 32GB Ram, Intel i7 4790, AsRock Z97 Pro 4, NVidia 750ti, AP2496 Sonar Platinum, W7 Pro, 16GB Ram, AMD FX 6300, Gigabyte GA 970 -UD3 P, nVidia 9800GT, Guitar Port, Terratec EWX 2496
|
promidi
Max Output Level: -66 dBFS
- Total Posts : 1220
- Joined: 2014/11/21 18:46:39
- Location: South Australia
- Status: offline
Re: Windows 10 latest update
2018/05/13 22:32:16
(permalink)
Westside Steve Simmons
I have yet to install this update but I'm sure I will eventually . Has anyone done so and if you have has it caused problems with Cakewalk? Or anything?
I had to uninstall and reinstall my modified Windows 8.1 PCR-800 driver for Windows 10. After the update, the PCR-800 showed as working properly in device manager, but no MIDI was being received via its USB. The migration to the new driver management paradigm in this update to not take place correctly. Installing the driver over the was not enough. I had to do the complete uninstall and reinstall on the modified Windows 8.1 PCR-800 driver. Other than that everything was smooth.
Windows 10 64bit fully patched, 16 gig ram . PCR-800 Controller. (Working in Win 10 1809 64bit)CPU: i5 4670. Video: Nvidia GTX560ti (latest drivers). Audio IF: Focusrite 2i2 2nd Gen
Internet always on.
Software: Cakewalk by Bandlab (2018.09 B29)
ASIO mode. 24bit 48khz 256 samples Rapture Pro, AAS GS2, VS-3, EP-4, VA-2, Chromophone 2, Z3TA+ 2, Addictive drums 2, Addictive Keys, Mpowersynth (latest), Iris 2, GPO5, Sampletank 3,
|
msmcleod
Max Output Level: -72 dBFS
- Total Posts : 920
- Joined: 2004/01/27 07:15:30
- Location: Scotland
- Status: offline
Re: Windows 10 latest update
2018/05/13 23:56:04
(permalink)
I had a few issues on the initial upgrade to 1803: - "folders as drive" mappings gone
- focusrite audio driver needed re-installing... 4 times before it took hold!!
- AD2 needing re-authorised - this happens every major win update, so it's kind of expected now
Since then, there's been 2 maybe 3 updates to 1803. I have had no issues with those whatsoever. M.
|
msmcleod
Max Output Level: -72 dBFS
- Total Posts : 920
- Joined: 2004/01/27 07:15:30
- Location: Scotland
- Status: offline
Re: Windows 10 latest update
2018/05/14 00:05:37
(permalink)
Actually, there was one other problem I had I totally forgot about.
I run VirtualBox on my Studio PC running a 32-bit Windows XP VM, mainly for some old 16 bit apps (like Korg X5D / NX5R synth editors), and some other old apps I find useful.
VirtualBox requires vt-x to run, which clashes with Microsoft's Hyper-V. I had Hyper-V disabled, but after 1803 it seemed to think it was back, even though the system claimed otherwise. 1803 must have partially installed it again somehow, as the services were all back.
If anyone else has this setup, to fix it you need to fully enable Hyper-V and disable it again:
Run powershell as administrator, and type:
Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V -All
Let your machine restart etc.
Once you've rebooted, run powershell as administrator again and type:
Disable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V-All
M.
|
Westside Steve Simmons
Max Output Level: -87 dBFS
- Total Posts : 196
- Joined: 2015/01/11 15:44:22
- Status: offline
Re: Windows 10 latest update
2018/05/15 11:15:05
(permalink)
Thanks everybody. I think I'm going to install it on my office PC and my Surface then on to the studio PC.
WSS
|
Westside Steve Simmons
Max Output Level: -87 dBFS
- Total Posts : 196
- Joined: 2015/01/11 15:44:22
- Status: offline
Re: Windows 10 latest update
2018/06/19 10:56:51
(permalink)
For the record I installed the update and haven't had a problem. Good.
WSS
|
joakes
Max Output Level: -72 dBFS
- Total Posts : 905
- Joined: 2006/12/05 15:51:24
- Location: 465 Km South West of Paris
- Status: offline
Re: Windows 10 latest update
2018/06/19 15:29:18
(permalink)
On my Desktop it hosed the mike from the webcam - had to go into Settings, Privacy, Microphone to turn it back on. Its well documented on the web now.
But it didn’t do that to my laptop. Very odd.
Cheers,
Jerry
Built by yours truely : I7-2600@3.4GHz, Asus P67Z68, W10x64 Creator Edition, 32GB RAM, 3 HD's, nVidia 760 GT, Focusrite 18i20 2,d Gen + Ti FW, Oxygen 61 iv Gen, and Edirol SD-20 (yes it works), CbB, Teles, Strats, LP's, Epi Riviera, etc
|
belltunes
Max Output Level: -89 dBFS
- Total Posts : 64
- Joined: 2003/11/10 18:50:53
- Status: offline
Re: Windows 10 latest update
2018/06/19 22:16:23
(permalink)
No issues here after installing 1803
|
timboalogo
Max Output Level: -89 dBFS
- Total Posts : 54
- Joined: 2004/12/29 08:45:15
- Status: offline
Re: Windows 10 latest update
2018/06/20 12:10:09
(permalink)
I imaged my hard drive yesterday morning (Clonezilla) and let 1803 do it's stuff - so far no problemo, but I don't trust the update process.
|