Windows 7 & Core Parking .... a *better* way to Turn It OFF ....

Page: 123 > Showing page 1 of 3
Author
TomG
Max Output Level: -84 dBFS
  • Total Posts : 339
  • Joined: 2007/02/19 05:28:39
  • Status: offline
2009/11/01 05:11:13 (permalink)

Windows 7 & Core Parking .... a *better* way to Turn It OFF ....

Firstly major props to new forum member sky60234 for the following method.
 
Some of you will recall my previous regedit to turn-off Win 7 Core Parking here:-  http://forum.cakewalk.com/fb.ashx?m=1852473
 
This is now superseded by a much better method.   Thanks to  sky60234   there is now an  easier  / non-destructive  /  fully reversible  way to do this - ie: no deletions of .Reg keys needed - only an entry value adjustment.

 
________________________________________________________
 
In short, here is the better method from sky60234:-
 
- Go to Regedit
 
- Find this key:-  " 0cc5b647-c1df-4637-891a-dec35c318583 "
 
- Within this key, there is a value called:  " ValueMax "
 
- This value represents the % number of cores the system will park - the default 100%  ie:  all Cores are potentially park-able
 
- Change the value from 64 to 0 so the " ValueMin "  and  " ValueMax " are both zero
 
- You will have to find the key a few times and repeat the process for each time it is found - the number of instances will depend on the number of power profiles in your system  [  in my DAW it was only found twice ]
 
- Do a full shutdown and power-off and cold-re-start
 
________________________________________________________
 
 
I have tested the above on a clean Windows 7 x64 / Clean 8.5.1 install and it works perfectly - all Cores are available at all times and none are ever parked - the result  =  even CPU loads at all times regardless of loads.
 
As sky60234 noted, the advantage of the above is that nothing at all is being deleted from the Registry -  all that is being done is that a value is being adjusted.
 
Again, major thanks and props to   sky60234  for this excellent  fix.
 
Tom
post edited by TomG - 2009/11/01 05:18:23
#1

65 Replies Related Threads

    Fret Wizz
    Max Output Level: -79 dBFS
    • Total Posts : 581
    • Joined: 2007/07/01 13:46:57
    • Location: Adelaide South Australia
    • Status: offline
    Re:Windows 7 & Core Parking .... a *better* way to Turn It OFF .... 2009/11/01 06:15:39 (permalink)
    That's a good tip.

    Is that setting in any way related to 'Minimum Processor State"
     and "Maximum Processor State" in the" Processor power management"
    section of "Advanced Power Settings" in Win 7?

    post edited by Fret Wizz - 2009/11/01 06:21:26

    Fret Wizz
    SONAR  8.5 PE 64 bit : Win 7 Ultimate 64 BitEcho MIA
    #2
    TomG
    Max Output Level: -84 dBFS
    • Total Posts : 339
    • Joined: 2007/02/19 05:28:39
    • Status: offline
    Re:Windows 7 & Core Parking .... a *better* way to Turn It OFF .... 2009/11/01 07:37:41 (permalink)
    Hi Fret Wizz

    No.

    The setting in the 1st post of this thread  [ and the regedit it " replaces " in the cross-referenced thread ]  is solely to disable CPU Core Parking in Win 7 for  quad-core DAW's.

    It  [ and the regedit it " replaces " in the cross-referenced thread]  are the only 2 known ways to disable CPU Core Parking in Win 7 for  quad-core DAW's.

    Tom
    #3
    riojazz
    Max Output Level: -64 dBFS
    • Total Posts : 1337
    • Joined: 2004/02/26 13:23:02
    • Location: Mid-Hudson Valley, NY
    • Status: offline
    Re:Windows 7 & Core Parking .... a *better* way to Turn It OFF .... 2009/11/01 08:53:49 (permalink)
    Just a reminder from that other thread:

    "It  only  applies to Windows 7 X64 and X32 and  only  in systems using  more  than 2 physicial CPU's  and/or  more than 2  "logical" cores - ie:  Core i7 DAW's. "

    Software: Cakewalk by Bandlab; Adobe Audition; Band-in-A-Box audiophile; Izotope Ozone; Encore; Melodyne; Win 10 Pro, 64-bit.

    Hardware: Focusrite Scarlett 18i20 2nd; Roland Integra-7; TCE Finalizer; Presonus Central Station, Behringer X-Touch.  Home built i7 with 16 GB RAM, SSDs.
    #4
    Fret Wizz
    Max Output Level: -79 dBFS
    • Total Posts : 581
    • Joined: 2007/07/01 13:46:57
    • Location: Adelaide South Australia
    • Status: offline
    Re:Windows 7 & Core Parking .... a *better* way to Turn It OFF .... 2009/11/01 09:12:56 (permalink)
    Thanks for the info guys.

    I guess this doesn't apply to me yet as even though 
    I'm now wunning Win 7 my PC is a Core 2 Duo.

    Building an i5 soon so it'll come in  handy then.


    Fret Wizz
    SONAR  8.5 PE 64 bit : Win 7 Ultimate 64 BitEcho MIA
    #5
    eratu
    Max Output Level: -46.5 dBFS
    • Total Posts : 2856
    • Joined: 2007/01/27 22:08:32
    • Status: offline
    Re:Windows 7 & Core Parking .... a *better* way to Turn It OFF .... 2009/11/01 09:23:33 (permalink)
    Thanks for the heads-up!
    #6
    Damp Sneaker
    Max Output Level: -90 dBFS
    • Total Posts : 31
    • Joined: 2008/05/12 05:59:18
    • Location: 14 miles north of Boston
    • Status: offline
    Re:Windows 7 & Core Parking .... a *better* way to Turn It OFF .... 2009/11/01 09:42:43 (permalink)
    That was easy! Big thanks to TomG and Sky60234.

    Sonar P.E. X1 x64  
    Windows 7 Professional x64      
    AMD Phenom II 940 Quad 3.0GHz - 8Gigs ram
    NVIDIA GeForce 9800 GTX+
    Audio Interface: Guitar Rig Kontrol 3


    #7
    Anubis
    Max Output Level: -69 dBFS
    • Total Posts : 1059
    • Joined: 2004/01/16 00:59:30
    • Location: Miami
    • Status: offline
    Re:Windows 7 & Core Parking .... a *better* way to Turn It OFF .... 2009/11/01 12:11:50 (permalink)
    Great stuff! I'm bookmarking this thread for when I take da leap.

    X2Studio_Win7(64)_SamsungChronos_QuNexus_QuNeo_Axiom25_Saffire24Pro_Saffire6USB_EdirolPCR300_Nocturn
    Amplitubes_AmpegSVX_StylusRMX_SampleTank/Tron_Komplete7_AddictiveDrums_TRacks3_Wavelab6
    miTunes
    #8
    rockreid
    Max Output Level: -89 dBFS
    • Total Posts : 72
    • Joined: 2006/09/23 14:56:35
    • Status: offline
    just to be clear, does this issue include my Q9550 cpu? 2009/11/01 12:37:10 (permalink)
    just to be clear, does this issue include my Q9550 cpu?

    home brew PC as follows:
    Windows 7  x64 bit
    Intel Q9550 cpu
    Gigabyte GA-X48-DQ6 MB
    Corsair 8GB DDR-2 1066 (PC2 8500) RAM
    RME UFX interface       
    Sonar X1  64 bit
    Edirol PCR-800 controller
    Rapture
    BFD2
    Jamstix3 
    Korg PadKontrol
    Guitar Rig 4 Pro

    mostly PSP and Voxengo VST plugs
    #9
    TomG
    Max Output Level: -84 dBFS
    • Total Posts : 339
    • Joined: 2007/02/19 05:28:39
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/01 18:49:14 (permalink)
    Hi rockreid !

    Yes it  %100 does include your Q9550 - so if/when you go to Windows 7, you will need to make this adjustment.

    As riojazz noted  it applies to  all  Windows 7 X64 and X32 installations where the system is using  more  than 2 physicial CPU's  and/or  more than 2  "logical" cores - ie:  all Intel CPU's that are Quad-Core or higher.

    Tom

    PS: I assume it also applies to AMD quad-core cpu's but I dont use AMD for my DAW'a any more so I cant be certain, but my expectation would be that AMD quad-core would respond to core-parking exaclty the same as the Intel quad-cores.
    #10
    Jose7822
    Max Output Level: 0 dBFS
    • Total Posts : 10031
    • Joined: 2005/11/07 18:59:54
    • Location: United States
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/01 19:17:38 (permalink)
    Tom,

    Thanks a lot for the info.  And big thanks to sky60234 for providing this simple method.

    There's another new feature in Win 7 that people may want to avoid as pointed out in this thread:

    http://forum.cakewalk.com/tm.aspx?m=1858476


    Just throwing it out there for those who haven't read it and may not want this in their system.


    Take care!


    Intel Q9400 2.66 GHz
    8 GB of RAM @ 800 Mhz
    ATI Radeon HD 3650
    Windows 7 Professional (SP1) x64
    Cubase 6.03 x64
    Sonar PE 8.5.3 x64
    RME FireFace 400
    Frontier Design Alpha Track
    Studio Logic VMK-188 Plus

    http://www.youtube.com/user/SonarHD
    #11
    TomG
    Max Output Level: -84 dBFS
    • Total Posts : 339
    • Joined: 2007/02/19 05:28:39
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/01 19:26:34 (permalink)
    Hi Jose

    Many thanks - I hadnt realised about the system reserved partition - much appreciated - will go and " fix " it now.

    All the best,
    Tom
    #12
    Jose7822
    Max Output Level: 0 dBFS
    • Total Posts : 10031
    • Joined: 2005/11/07 18:59:54
    • Location: United States
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/01 19:29:15 (permalink)
    No problem!

    It's good that we can interchange information like this.  That's why I love this forum :-)


    Take care!

    Intel Q9400 2.66 GHz
    8 GB of RAM @ 800 Mhz
    ATI Radeon HD 3650
    Windows 7 Professional (SP1) x64
    Cubase 6.03 x64
    Sonar PE 8.5.3 x64
    RME FireFace 400
    Frontier Design Alpha Track
    Studio Logic VMK-188 Plus

    http://www.youtube.com/user/SonarHD
    #13
    Tom Riggs
    Max Output Level: -57.5 dBFS
    • Total Posts : 1752
    • Joined: 2003/11/08 22:47:26
    • Location: Displaced Kansan living in Philippines
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/01 22:22:09 (permalink)
    Or simpler yet just cup the text below and put it into a text file named "disable core parking.reg" then double click the file and answer yes when windows asks of you want to merge this into the registry.

    copy the text below this line:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\0cc5b647-c1df-4637-891a-dec35c318583]

    "ValueMax"=dword:00000000
     

    i7-3770k OC at 4.5Ghz, asus p8z77-m, 16g g.skill aries 1600 c9 ram, Noctua d-14 cooler, RME HDSPe Raydat, Motu FastLane, Nvidea GTX 980 ti 6G, windows 7 and 8.1 pro x64. Sonar Platinum and x3e currently installed

    My Music 
    My YouTube
     
    #14
    Fret Wizz
    Max Output Level: -79 dBFS
    • Total Posts : 581
    • Joined: 2007/07/01 13:46:57
    • Location: Adelaide South Australia
    • Status: offline
    ooops! wrong thread! 2009/11/02 04:37:20 (permalink)
    ooops! wrong thread!






    post edited by Fret Wizz - 2009/11/02 05:33:23

    Fret Wizz
    SONAR  8.5 PE 64 bit : Win 7 Ultimate 64 BitEcho MIA
    #15
    mrfitz
    Max Output Level: -86 dBFS
    • Total Posts : 216
    • Joined: 2006/08/20 14:06:01
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/02 07:33:24 (permalink)
    TomG




    PS: I assume it also applies to AMD quad-core cpu's but I dont use AMD for my DAW'a any more so I cant be certain, but my expectation would be that AMD quad-core would respond to core-parking exaclty the same as the Intel quad-cores.

    I'm not so sure. I'm running an AMD phenom and in a fit of curiosity I ran sonar for about 45 minutes with the resource monitor running and it never parked a core. I intentionally went totally inactive for over 5 minutes twice and it just never happened. So I'm guessing that either a) AMD processors are not affected, or b) core parking doesn't happen quite so much.

    ymmv
     



    Sonar X1c pe x64
    Sonar VS-100
    phenom 9600 x4
    Win 7 x64 Home Prem
    4 gigabytes ram
    a homebrew champ
    and a telecaster

    #16
    slartabartfast
    Max Output Level: -22.5 dBFS
    • Total Posts : 5289
    • Joined: 2005/10/30 01:38:34
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/02 13:42:36 (permalink)
    Has anyone actually had a problem during the use of Sonar under win 7 that they can track to core parking that has not been disabled?

    There is a comment on it in this interview:
    http://www.jsonar.org/drupal/content/how-windows-7-will-effect-your-music-production

    but the comment does not really say there was an associated problem or interruption of service.

    frightful echo in here:

    http://createdigitalmusic.com/2009/09/29/obsessive-windows-7-under-the-hood-guide-for-music-can-you-finally-dump-xp/

    Maybe Noel can clarify whether or not turning off core parking is likely to be of benefit.
    post edited by slartabartfast - 2009/11/02 14:03:16
    #17
    holderofthehorns
    Max Output Level: -77 dBFS
    • Total Posts : 679
    • Joined: 2005/10/01 15:21:56
    • Location: Marion, OH
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/02 18:10:33 (permalink)
    Can't remeber which thread, but I do remember Noel saying "There was no appreciable difference..." in any of their core park testing.  No hiccups, no bumps, nada.  Ergo, they were not at all concerned with core parking. 

    Ergo, I did not remember this until you said, "Maybe Noel can clarify...".    

    You could probably search "Noel" and "Parking" and find it on the first try.  It wasn't more than a month or two ago.

    Eric Anderson
    HolderOfTheHorns - It's a Viking thing.
    #18
    bl1615
    Max Output Level: -90 dBFS
    • Total Posts : 1
    • Joined: 2009/11/12 15:18:37
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/27 18:49:52 (permalink)
    So I tried the change and was able to edit the key like 3 times I believe. I changed the max value from 64 to 0. Exited and then shut down. However when I restart and go the resource monitor I still show cores being parked. I went back to regedit and searched for the key again to double check and the changes are still there correctly made as far as I can see. I have a dell xps 900 i7920. Any ideas what I might be doing wrong or why this fix wouldn't be working.
    #19
    Jose7822
    Max Output Level: 0 dBFS
    • Total Posts : 10031
    • Joined: 2005/11/07 18:59:54
    • Location: United States
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/27 19:19:38 (permalink)
    Did you disable SpeedStep in the BIOS?

    Restart your computer and press F2 on boot, which will take you into the BIOS.  I think the SpeedStep setting is under "Performance" (or similar wording).  Shut it off and see if that helps.  Also, make sure that your power setting is set to "High Performance".  This can be found in the Control Panel under "Power Options" (change the View to "Small Icons" to make it easier to find).


    HTH


    Intel Q9400 2.66 GHz
    8 GB of RAM @ 800 Mhz
    ATI Radeon HD 3650
    Windows 7 Professional (SP1) x64
    Cubase 6.03 x64
    Sonar PE 8.5.3 x64
    RME FireFace 400
    Frontier Design Alpha Track
    Studio Logic VMK-188 Plus

    http://www.youtube.com/user/SonarHD
    #20
    SilkTone
    Max Output Level: -59.5 dBFS
    • Total Posts : 1566
    • Joined: 2003/11/10 17:41:28
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/11/27 21:08:22 (permalink)
    holderofthehorns


    Can't remeber which thread, but I do remember Noel saying "There was no appreciable difference..." in any of their core park testing.  No hiccups, no bumps, nada.  Ergo, they were not at all concerned with core parking. 
    That is what I was thinking. I'd be surprised if there was any noticeable difference when you disable core parking. The fact that Sonar is always using CPU cycles even when stopped seems to imply the cores would probably not be parked while Sonar is running unless the project was essentially empty. And even if it did park cores, I would be surprised if they could not be un-parked fast enough where they would actually cause a glitch.
     
    Basically, do we have any proof that this makes any difference while using Sonar?

    Windows 10 Pro x64, SONAR Platinum 64-bit
    Focusrite Scarlett 18i8 USB, ASRock Z97 Pro4, Haswell 4790k @ 4.4GHz
    32GB DDR3/1600, 500GB SSD (OS) + 256 GB SSD + 3TB MD
    NVIDIA GTX-1070, 40" 4K Monitor + 1 Monitor in ISO booth
    #21
    Manolo
    Max Output Level: -81 dBFS
    • Total Posts : 454
    • Joined: 2004/01/29 16:00:49
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/12/20 04:30:28 (permalink)
    bl1615


    So I tried the change and was able to edit the key like 3 times I believe. I changed the max value from 64 to 0. Exited and then shut down. However when I restart and go the resource monitor I still show cores being parked. I went back to regedit and searched for the key again to double check and the changes are still there correctly made as far as I can see. I have a dell xps 900 i7920. Any ideas what I might be doing wrong or why this fix wouldn't be working.


    Same thing here. One core stays higher than the others in Sonar 8.5.2. Find and change the reg key 2 times on Windows 7 Ultimate 64 bits. The Intel SpeedStep is disable. Any clue ?

    RME Fireface UC | Sonar Platinum x64/Windows 10 Pro x64| Superior 2.0 with all Toontrack soundbanks, Eastwest Complete Composer used in Kontakt 5, Ozone 5 | VS-700C, BCF 2000

    #22
    Manolo
    Max Output Level: -81 dBFS
    • Total Posts : 454
    • Joined: 2004/01/29 16:00:49
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/12/21 17:25:33 (permalink)
    It works for everyone ?

    RME Fireface UC | Sonar Platinum x64/Windows 10 Pro x64| Superior 2.0 with all Toontrack soundbanks, Eastwest Complete Composer used in Kontakt 5, Ozone 5 | VS-700C, BCF 2000

    #23
    submarin
    Max Output Level: -85 dBFS
    • Total Posts : 260
    • Joined: 2008/12/16 09:36:47
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/12/21 17:29:23 (permalink)
    I´m on VISTA 64 ultimate, and my first Core is also always the most used one..

    i7 4770, 32 GB Ram, W8.1 64bit, RME Digiface, 3x RME Adi DS, Uad2 Quad, , Sonar Platinum, Cubase 8 pro, Reaper , Ableton Live
    www.m2-productions.com
    #24
    pinguinotuerto
    Max Output Level: -71 dBFS
    • Total Posts : 976
    • Joined: 2009/12/01 18:46:41
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/12/21 18:04:24 (permalink)
    Honestly, I don't know why people bother with turning core parking off or overclocking with the Core i7!
    Has anyone run into some limitations that require any of this?  I think people are still holding on to "old Windows XP optimization tricks" that are pointless nowadays.

    Anyway, please correct me if I'm wrong.

    HP DV7-3085 Laptop (Intel Core i7 720 1.6 GHZ, 6 GB RAM, 1333 MHZ FSB, 2 500GB 7200 RPM Internal HDs, 17" screen), HP 2009m Monitor, 2TB Ext Drive
    Line 6 UX8 with PodFarm 2 Platinum

    2 Joe Meek VC6Q British Channels
    Sonar Platinum & X3e Producer (64 Bit)

    AD2 w Roland V-Drums (TD4KX2)
    Windows 7 Home Premium (64 bit)

    KRK VXT 8 Monitors
    Frontier Alphatrack, Razer Naga Mouse, nanoKontrol2
     

    #25
    Manolo
    Max Output Level: -81 dBFS
    • Total Posts : 454
    • Joined: 2004/01/29 16:00:49
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/12/22 03:29:18 (permalink)
    Core parking is a problem cause you reach a limit that is not the real limit of the CPU power. Sure, you're right, with i7, it needs huge projects to take the CPU down but there's no reason that each core doesn't work equal.

    RME Fireface UC | Sonar Platinum x64/Windows 10 Pro x64| Superior 2.0 with all Toontrack soundbanks, Eastwest Complete Composer used in Kontakt 5, Ozone 5 | VS-700C, BCF 2000

    #26
    Freddie H
    Max Output Level: -39 dBFS
    • Total Posts : 3617
    • Joined: 2007/09/21 06:07:40
    • Status: offline
    Re:Windows 7 & Core Parking .... a *better* way to Turn It OFF .... 2009/12/22 05:47:27 (permalink)
    TomG


    Firstly major props to new forum member sky60234 for the following method.
     
    Some of you will recall my previous regedit to turn-off Win 7 Core Parking here:-  http://forum.cakewalk.com/fb.ashx?m=1852473
     
    This is now superseded by a much better method.   Thanks to  sky60234   there is now an  easier  / non-destructive  /  fully reversible  way to do this - ie: no deletions of .Reg keys needed - only an entry value adjustment.

     
    ________________________________________________________
     
    In short, here is the better method from sky60234:-
     
    - Go to Regedit
     
    - Find this key:-  " 0cc5b647-c1df-4637-891a-dec35c318583 "
     
    - Within this key, there is a value called:  " ValueMax "
     
    - This value represents the % number of cores the system will park - the default 100%  ie:  all Cores are potentially park-able
     
    - Change the value from 64 to 0 so the " ValueMin "  and  " ValueMax " are both zero
     
    - You will have to find the key a few times and repeat the process for each time it is found - the number of instances will depend on the number of power profiles in your system  [  in my DAW it was only found twice ]
     
    - Do a full shutdown and power-off and cold-re-start
     
    ________________________________________________________
     
     
    I have tested the above on a clean Windows 7 x64 / Clean 8.5.1 install and it works perfectly - all Cores are available at all times and none are ever parked - the result  =  even CPU loads at all times regardless of loads.
     
    As sky60234 noted, the advantage of the above is that nothing at all is being deleted from the Registry -  all that is being done is that a value is being adjusted.
     
    Again, major thanks and props to   sky60234  for this excellent  fix.
     
    Tom
    Thank you Tom! =)
     
    I have add this great info in "Did you know" thread
    http://forum.cakewalk.com/tm.aspx?&m=1830605&mpage=1
    Have great Christmas my friend!
     
     
    Regards
    Freddie


    -Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
    #27
    pinguinotuerto
    Max Output Level: -71 dBFS
    • Total Posts : 976
    • Joined: 2009/12/01 18:46:41
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/12/22 11:21:21 (permalink)
    Manolo


    Core parking is a problem cause you reach a limit that is not the real limit of the CPU power. Sure, you're right, with i7, it needs huge projects to take the CPU down but there's no reason that each core doesn't work equal.

    What makes you think that because all cores are not working equally at any given moment (by that I'm assuming you mean spreading the load equally among all cores), that the computer is not performing at its optimum level?
     
    Why must all cores be engaged if it isn't necessary?  It might be a waste of resourses. 
     
    I think the Multi-Core CPUs are designed (by very smart people) to kick in when needed.

    HP DV7-3085 Laptop (Intel Core i7 720 1.6 GHZ, 6 GB RAM, 1333 MHZ FSB, 2 500GB 7200 RPM Internal HDs, 17" screen), HP 2009m Monitor, 2TB Ext Drive
    Line 6 UX8 with PodFarm 2 Platinum

    2 Joe Meek VC6Q British Channels
    Sonar Platinum & X3e Producer (64 Bit)

    AD2 w Roland V-Drums (TD4KX2)
    Windows 7 Home Premium (64 bit)

    KRK VXT 8 Monitors
    Frontier Alphatrack, Razer Naga Mouse, nanoKontrol2
     

    #28
    Manolo
    Max Output Level: -81 dBFS
    • Total Posts : 454
    • Joined: 2004/01/29 16:00:49
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/12/22 12:01:02 (permalink)
    As far as one core doesn't reach 100% (and stop Sonar) before others are used, no problem of course.

    RME Fireface UC | Sonar Platinum x64/Windows 10 Pro x64| Superior 2.0 with all Toontrack soundbanks, Eastwest Complete Composer used in Kontakt 5, Ozone 5 | VS-700C, BCF 2000

    #29
    John
    Forum Host
    • Total Posts : 30467
    • Joined: 2003/11/06 11:53:17
    • Status: offline
    Re:just to be clear, does this issue include my Q9550 cpu? 2009/12/22 12:23:41 (permalink)
    What we need is a solid instance where core parking is a problem. On the face of it, it does seem unnecessary for a desktop machine. But can anyone show it interferes with Sonar? 

    Best
    John
    #30
    Page: 123 > Showing page 1 of 3
    Jump to:
    © 2024 APG vNext Commercial Version 5.1