millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
X1 Additional Content wont install - dimension pro v1.5 not found - FIXED
I get an error message saying that the correct version of dimension Pro was not installed (or words to that effect.) I have installed the 1.5 update on top of my 1.2 version. When I insert DP into a project, open it and right click on properties it definitely comes up as v1.5 so that has worked. It sits in the correct folder from what I can see (..program files/cakewalk/vstplugins) but no go. Do I have to delete any DXi versions of DP for this to work?? Any other suggestions appreciated, cheers!
post edited by millzy - 2012/01/25 07:30:53
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
timidi
Max Output Level: -21 dBFS
- Total Posts : 5449
- Joined: 2006/04/11 12:55:15
- Location: SE Florida
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 11:01:31
(permalink)
This may help: http://www.cakewalk.com/Support/product.aspx/Dimension-Pro However, I have the same problem in a different color. I would like to keep Dimpro 1.2 AND load 1.5. (not that I want to but it seems like the only work-around) Once you load 1.5, 1.2 is not availabe as far as I can tell. 1.2 is a dxi and 1.5 is a VST. So, if you have lots of projects with 1.2, then load 1.5, all your patch data will be gone from your project. Then you have to figure out what it was and re-load into 1.5. Same thing with Rapture.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 11:56:32
(permalink)
Yep, that's right timidi.
That's when it helps to note somewhere in your project exactly what Dimpro patch is used.
I changed all the synth names in the synth rack to document mine - swapping them out for the equivalent in 1.5 was/is tedious, but 100% reliable!
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
thomasabarnes
Max Output Level: -43 dBFS
- Total Posts : 3234
- Joined: 2003/11/11 03:19:17
- Location: Milwaukee, WI USA
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 12:09:45
(permalink)
Users were having this problem when X1 was first released. The solution was to uninstall the old version of Dim Pro and install the version that comes with the X1 disk.
 "It's not a song till it touches your heart. It's not a song till it tears you apart!" Lyrics of Amy Grant. SONAR Platinum X64 (jBridge), Windows 10 Pro 64-Bit, Core i7 990X Extreme Edition Processor 3.46 GHz 6 Cores, Gigabyte EX58-UD5, Crucial Ballistix 24GB 1333MHz DDR3 @1333 MHz, TASCAM UH-7000, Behringer X-Touch, EVGA GTX 980TI Superclocked 6GB, 1TB Samsung EVO 850 SSD, 150GB, 320GB, 1TB 7200rpm HDDs
|
timidi
Max Output Level: -21 dBFS
- Total Posts : 5449
- Joined: 2006/04/11 12:55:15
- Location: SE Florida
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 12:15:41
(permalink)
Bristol_Jonesey
Yep, that's right timidi.
That's when it helps to note somewhere in your project exactly what Dimpro patch is used.
I changed all the synth names in the synth rack to document mine - swapping them out for the equivalent in 1.5 was/is tedious, but 100% reliable!
Not sure I understand Bristol. Do you mean the patch names? If so, that's a whole nother kettle of worms, in that DP file browser doesn't take you to the patch. I have hundreds of songs. To open everyone, document, re-save etc. would take days-weeks. It is the same with a lot of synths though and even going 32 to 64. It's a different animal. If I load Kontact32 in Sonar 32 and then switch to Sonar/kontact64, I have to start over manually with patching. At least however, the 32 bit Kontact will open though. I just think it really sucks that the Bakers' migration from dxi-VST works this way. And, I saw no need to document what patch was used at the time. Why would I? It came up in DP if I wanted to know. Of course hind sight is 20/20.
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 17:03:11
(permalink)
Timidi,
I'm in the exact same boat as you. I have lots of projects with 1.2 in them. I can still load 1.2 as well as 1.5 (1.2 is a DXi and 1.5 is a VST) but they're installed in different folders so you would think the additional content would look in the "....cakewalk/vstplugins" folder for the .dll version.
I've looked at that link and have done everything correctly - i'm not running 64bit, still on 32bit.
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 17:13:59
(permalink)
OK lads, so if i'm reading this correctly from your replies, I have to uninstall 1.2???? I dont have 1.5 as a complete file, just the update patch. I have 1.2 on a dvd. I bought X1 as a download and just downloaded the 1.5 upgrade - NOT the whole DP 1.5. Also as you guys say, going into every old project and noting down the 1.2 sounds is a time waster - not sure I'm prepared to go down that path. Man what a drama, all I want to do is install the additional contect, surely this cant be this friggin hard!!!
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
thomasabarnes
Max Output Level: -43 dBFS
- Total Posts : 3234
- Joined: 2003/11/11 03:19:17
- Location: Milwaukee, WI USA
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 17:35:36
(permalink)
Go download the X1 Dim Pro disk and install it after uninstalling the old Dim Pro 1.2 or 1.5. If you bought X1, you can download all the X1 disks. If it's not the Dim Pro that came with the X1 disks (that you have installed,) uninstall it, and install the Dim Pro from the X1 disks. Users were still having this issue with the Dim Pro 1.5 update downloaded from the Cakewalk Dim Pro support site. So, I say give downloading the X1 Dim Pro disk a shot. Uninstall any old Dim Pro and install Dim Pro from the X1 disks. That's the only solution I saw around here that worked. It appears this problem of Dim Pro not being installed correctly error, was experienced by users who had any copy of Dim Pro installed and then tried to install X1 and the X1 additional Content disk (there were posts reporting that that disk wouldn't even install after a user installed X1 but kept the old version of Dim Pro on their system.) Some users even had to start from scratch installing a fresh installation of Windows and only installing the complete X1 package to solve this issue. They didn't even install an older version of SONAR that included Dim Pro. To be honest, that's what I ended up having to do to solve this issue. I installed Windows from scratch, got Windows updates, and then I installed the complete X1 package. After I did that, all was working with very few issues, and this was back when X1a was the only X1 version out. I noticed that you're using Windows XP. I hope all goes well with you and X1, running that operating system, but I have seen more users running XP having more problems with X1 than users running Vista or Windows 7. I'm running Windows 7 Professional SP1. Oh, the problems we can encounter with software. :( Goodluck.
post edited by thomasabarnes - 2012/01/23 17:52:54
"It's not a song till it touches your heart. It's not a song till it tears you apart!" Lyrics of Amy Grant. SONAR Platinum X64 (jBridge), Windows 10 Pro 64-Bit, Core i7 990X Extreme Edition Processor 3.46 GHz 6 Cores, Gigabyte EX58-UD5, Crucial Ballistix 24GB 1333MHz DDR3 @1333 MHz, TASCAM UH-7000, Behringer X-Touch, EVGA GTX 980TI Superclocked 6GB, 1TB Samsung EVO 850 SSD, 150GB, 320GB, 1TB 7200rpm HDDs
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 21:24:32
(permalink)
Go download the X1 Dim Pro disk and install it after uninstalling the old Dim Pro 1.2 or 1.5. If you bought X1, you can download all the X1 disks. If it's not the Dim Pro that came with the X1 disks (that you have installed,) uninstall it, and install the Dim Pro from the X1 disks. Users were still having this issue with the Dim Pro 1.5 update downloaded from the Cakewalk Dim Pro support site. So, I say give downloading the X1 Dim Pro disk a shot. Uninstall any old Dim Pro and install Dim Pro from the X1 disks. That's the only solution I saw around here that worked. It appears this problem of Dim Pro not being installed correctly error, was experienced by users who had any copy of Dim Pro installed and then tried to install X1 and the X1 additional Content disk (there were posts reporting that that disk wouldn't even install after a user installed X1 but kept the old version of Dim Pro on their system.) Some users even had to start from scratch installing a fresh installation of Windows and only installing the complete X1 package to solve this issue. They didn't even install an older version of SONAR that included Dim Pro. To be honest, that's what I ended up having to do to solve this issue. I installed Windows from scratch, got Windows updates, and then I installed the complete X1 package. After I did that, all was working with very few issues, and this was back when X1a was the only X1 version out. I noticed that you're using Windows XP. I hope all goes well with you and X1, running that operating system, but I have seen more users running XP having more problems with X1 than users running Vista or Windows 7. I'm running Windows 7 Professional SP1. Oh, the problems we can encounter with software. :( Goodluck.
Wow, thanks for the info. I believe what you're saying, but I cant get my head around the solution. It doesnt make sense to me that you have to jump through all these hoops just to load an additional content disk. Anway, as you say, that's the software world we live in. OK, i'll go back into the Cake store and use another whatever gig of my monthly internet plan to download a fresh 1.5 version. This really sucks big time...........
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 21:27:55
(permalink)
deleted due to double up
post edited by millzy - 2012/01/23 21:36:32
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
thomasabarnes
Max Output Level: -43 dBFS
- Total Posts : 3234
- Joined: 2003/11/11 03:19:17
- Location: Milwaukee, WI USA
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 21:29:33
(permalink)
I'm thinking if you get the X1 disk version of Dim Pro, it may solve your problem just by you installing that version. If that doesn't work, you have to decide to just get by with what you have working, figure out something else, stumble upon some other solution to get it to work, or start from scratch. The choice is yours.
post edited by thomasabarnes - 2012/01/23 21:35:45
"It's not a song till it touches your heart. It's not a song till it tears you apart!" Lyrics of Amy Grant. SONAR Platinum X64 (jBridge), Windows 10 Pro 64-Bit, Core i7 990X Extreme Edition Processor 3.46 GHz 6 Cores, Gigabyte EX58-UD5, Crucial Ballistix 24GB 1333MHz DDR3 @1333 MHz, TASCAM UH-7000, Behringer X-Touch, EVGA GTX 980TI Superclocked 6GB, 1TB Samsung EVO 850 SSD, 150GB, 320GB, 1TB 7200rpm HDDs
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/23 21:38:54
(permalink)
Cheers mate, appreciate your help. I'm going to crack a beer and muddle over my options! Thanks.
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 03:47:33
(permalink)
One thing to be aware of.
If you plan to uninstall any version of Dimpro, you MUST remove the relevant keys in the Registry, otherwise Sonar will just load up the wrong version.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
thomasabarnes
Max Output Level: -43 dBFS
- Total Posts : 3234
- Joined: 2003/11/11 03:19:17
- Location: Milwaukee, WI USA
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 04:05:40
(permalink)
Good call Bristol. I bet that's the solution to getting it and the Additional Content disk installed without having to reinstall Windows! Doh, on my part. :)
post edited by thomasabarnes - 2012/01/25 00:20:24
"It's not a song till it touches your heart. It's not a song till it tears you apart!" Lyrics of Amy Grant. SONAR Platinum X64 (jBridge), Windows 10 Pro 64-Bit, Core i7 990X Extreme Edition Processor 3.46 GHz 6 Cores, Gigabyte EX58-UD5, Crucial Ballistix 24GB 1333MHz DDR3 @1333 MHz, TASCAM UH-7000, Behringer X-Touch, EVGA GTX 980TI Superclocked 6GB, 1TB Samsung EVO 850 SSD, 150GB, 320GB, 1TB 7200rpm HDDs
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 05:42:34
(permalink)
Good work lads, thanks heaps. I'm yet to download DP 1.5, but i'll keep everyone posted on its suucess/failure. Great tip on the registry entries, I wouldnt have done that. Cheers.
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 06:13:32
(permalink)
Delete the following Registry keys
(skip any of the keys if they don't exist in your registry) :
HKEY_CURRENT_USER\Software\Cakewalk Music Software\Dimension Pro
HKEY_LOCAL_MACHINE\Software\Cakewalk Music Software\Dimension Pro
HKEY_CURRENT_USER\Software\Cakewalk Music Software\dp
HKEY_LOCAL_MACHINE\Software\Cakewalk Music Software\dp
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 07:15:51
(permalink)
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 07:40:32
(permalink)
Backup your registry before you start!!!!!
If you don't know how, here's how:
1 - open up the Registry Editor (type regedit into the run command box)
2 - select File > Export. Give it a name and save it to your desktop
If you do foul up the editing process, just run regedit again and select Flie > Import
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
Dave King
Max Output Level: -46.5 dBFS
- Total Posts : 2862
- Joined: 2005/11/13 14:19:48
- Location: Connecticut, USA
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 16:38:07
(permalink)
Hey Millzy, when you upgraded did you keep 8.5 on your system? Did DP quit working in 8.5 after doing the X1 install?
Thanks.
Dave King www.davekingmusic.com SONAR X2 Producer 64-Bit
StudioCat PC
Windows 7 Home Premium, Service Pack 1
Intel Corel i5 3450 CPU @3.10 GHz
RAM 8 GB
M-Audio Delta 44 M-Audio MidiSport 2x2
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 18:57:22
(permalink)
Hey Dave,
Yep, 8.5 still on the system and DP still works. The issue isnt that DP doesnt work anymore, i can still insert it into a project no problems (in fact I can insert both versions - 1.2 and 1.5) the issue is that the Sonar 'Additional Content' file wont load because it cant find the 1.5 version of DP (when in fact it IS there, AND in the correct file folder.) The workaround appears to be to uninstall DP1.2, clean up the registry, and install the complete 1.5 package - not the 1.5 upgrade file. I downlaoded V1.5 last night but i'm yet to go through the motions!
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
timidi
Max Output Level: -21 dBFS
- Total Posts : 5449
- Joined: 2006/04/11 12:55:15
- Location: SE Florida
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 20:53:29
(permalink)
you'll lose access to your patch information that 1.2 would have shown you.
I think I've given up on the whole DP/rapture nightmare of "upgrading".
Ask yourself, "do I really need an upgrade of Dimension Pro"?
What do you get? Some in tune basses. sheeesh, who needs that?
|
Dave King
Max Output Level: -46.5 dBFS
- Total Posts : 2862
- Joined: 2005/11/13 14:19:48
- Location: Connecticut, USA
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 21:04:40
(permalink)
Since I have not upgraded to X1 (from 8.5.3) yet, but plan to do so in the next day or so, is there anything I can do in advance to avoid the DP problems mentioned above?
Dave King www.davekingmusic.com SONAR X2 Producer 64-Bit
StudioCat PC
Windows 7 Home Premium, Service Pack 1
Intel Corel i5 3450 CPU @3.10 GHz
RAM 8 GB
M-Audio Delta 44 M-Audio MidiSport 2x2
|
timidi
Max Output Level: -21 dBFS
- Total Posts : 5449
- Joined: 2006/04/11 12:55:15
- Location: SE Florida
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 22:35:11
(permalink)
Dave King
Since I have not upgraded to X1 (from 8.5.3) yet, but plan to do so in the next day or so, is there anything I can do in advance to avoid the DP problems mentioned above?
To clarify my point Dave, It is a matter of migrating the tunes I have which use DP 1.2. Doing so won't happen with 1.5. I just don't want to deal with that. Plus, the whole upgrade path to 1.5 is all very convoluted. I just choose to ignore it and try to make music. Actually, to that end, I'm back on 8.53 for now. 1.2 works in X1.
|
thomasabarnes
Max Output Level: -43 dBFS
- Total Posts : 3234
- Joined: 2003/11/11 03:19:17
- Location: Milwaukee, WI USA
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/24 22:55:07
(permalink)
Since I have not upgraded to X1 (from 8.5.3) yet, but plan to do so in the next day or so, is there anything I can do in advance to avoid the DP problems mentioned above? If you have any version of Dim Pro installed, uninstall it, then delete the registry keys listed in a post by Bristol_Jonesey in this thread, and install X1 including the Dim Pro that is included on one of the X1 downloadable disks. Do not install any version of Dim Pro that can be downloaded from the Cakewalk Dim Pro support site or that can be installed from any previous version of SONAR. Hope for the best. :)
"It's not a song till it touches your heart. It's not a song till it tears you apart!" Lyrics of Amy Grant. SONAR Platinum X64 (jBridge), Windows 10 Pro 64-Bit, Core i7 990X Extreme Edition Processor 3.46 GHz 6 Cores, Gigabyte EX58-UD5, Crucial Ballistix 24GB 1333MHz DDR3 @1333 MHz, TASCAM UH-7000, Behringer X-Touch, EVGA GTX 980TI Superclocked 6GB, 1TB Samsung EVO 850 SSD, 150GB, 320GB, 1TB 7200rpm HDDs
|
Dave King
Max Output Level: -46.5 dBFS
- Total Posts : 2862
- Joined: 2005/11/13 14:19:48
- Location: Connecticut, USA
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/25 00:12:10
(permalink)
thomasabarnes
Since I have not upgraded to X1 (from 8.5.3) yet, but plan to do so in the next day or so, is there anything I can do in advance to avoid the DP problems mentioned above?
If you have any version of Dim Pro installed, uninstall it, then delete the registry keys listed in a post by Bristol_Jonesey in this thread, and install X1 including the Dim Pro that is included on one of the X1 downloadable disks. Do not install any version of Dim Pro that can be downloaded from the Cakewalk Dim Pro support site or that can be installed from any previous version of SONAR.
Hope for the best. :)
Sounds like a fun weekend project! Thanks.
Dave King www.davekingmusic.com SONAR X2 Producer 64-Bit
StudioCat PC
Windows 7 Home Premium, Service Pack 1
Intel Corel i5 3450 CPU @3.10 GHz
RAM 8 GB
M-Audio Delta 44 M-Audio MidiSport 2x2
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/25 02:14:56
(permalink)
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/25 07:08:28
(permalink)
Well lads, it works! Hope it was worth all the friggin around i'll have to do on my old V1.2 projects. I wont open them in a hurry!
A huge thanks to Bristol Jonesy, Thomasabarnes and Timidi, for chiming in with various parts of the puzzle!! OK, i'm off to bed my eyes are hurting, too much screen time!!!! CHeers.
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
thomasabarnes
Max Output Level: -43 dBFS
- Total Posts : 3234
- Joined: 2003/11/11 03:19:17
- Location: Milwaukee, WI USA
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/25 09:31:45
(permalink)
Good to hear it worked! :)
"It's not a song till it touches your heart. It's not a song till it tears you apart!" Lyrics of Amy Grant. SONAR Platinum X64 (jBridge), Windows 10 Pro 64-Bit, Core i7 990X Extreme Edition Processor 3.46 GHz 6 Cores, Gigabyte EX58-UD5, Crucial Ballistix 24GB 1333MHz DDR3 @1333 MHz, TASCAM UH-7000, Behringer X-Touch, EVGA GTX 980TI Superclocked 6GB, 1TB Samsung EVO 850 SSD, 150GB, 320GB, 1TB 7200rpm HDDs
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/25 09:49:59
(permalink)
No problem dude - get some rest.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
gray36
Max Output Level: -83 dBFS
- Total Posts : 372
- Joined: 2010/03/12 10:22:18
- Status: offline
Re:X1 Additional Content wont install, any ideas????
2012/01/25 14:37:26
(permalink)
Was not real sure, what was on the additional content disc, but after seeing the problems people were having after inserting Disc 2(Dim. Pro 1.5), and disc 4(add. cont.), I called Cake Support, told them I was upgrading from 8.5.3, already had Dim. Pro 1.5, he told me if I was not worried disc 4, which I wasn't, he had me install everything from disc 1, and that was it! Have had no problems since, up to X1c, about to go Expanded. But if you don't need the add. content disc, then just go with disc 1, and go, of course I always tell people I do very small projects, but have used Dim. Pro 1.5, from 8.5.3, and never had any problems. Just a suggestion for those to come.
HP Pavilion dv6 Intel Duo Core 2 2.20GHz T6600, Windows 7 x 64, Guitar tracks Pro 4, SonarX1dEXP,SonarX2Prod. 8.5.3, Focusrite Saffire 6 USB, JBL monitors, Alesis SR-16, Guitar Rig 4 Pro, PRS SE, Epiphone Les Paul Custom, Cort SJ-10 ,Steven Slate 3.5, Akai MPK25, Glyph GT 050Q (500GB)RP1000 http://soundcloud.com/mar...ayin-around-mix1
|