jimmitch
Max Output Level: -90 dBFS
- Total Posts : 44
- Joined: 2010/02/22 09:27:09
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 10:50:48
(permalink)
This worked ...... To roll back from a QuickFix build, do the following: Navigate to the location you have SONAR installed. In most cases this is C:\Program Files\Cakewalk\SONAR X1 Version or C:\Program Files (x86)\Cakewalk\SONAR X1 Version Open the "Backup" folder and then open the Folder titled with the date you ran the QuickFix installer. Contained within should be a folder titled the version number that was backed up. Example: C:\Program Files\Cakewalk\SONAR X1 Producer\Backup\12082011\Version_18.1.0.425 Select the contents in this folder and press CTRL+ C to copy them to your clipboard Return to the folder SONAR is officially installed to. Example: C:\Program Files\Cakewalk\SONAR X1 Producer Press CTRL + V to paste the contents into this location. If prompted with the message "There is already a file with the same name in this location", select Copy and Replace. SONAR X1 Producer Expanded only: Navigate to the location where your Softube Saturation Knob is installed. In most cases this is C:\Program Files\Cakewalk\Shared Utilities\Internal\Softube or C:\Program Files (x86)\Cakewalk\Shared Utilities\Internal\Softube Delete all of the contents of the "Softube" folder (including both the "Saturation Knob.dll" as well as the "Backup" folder). The X1d installer will create a new Saturation Knob.dll file for you. NOTE: If you have disabled "Scan for VST Plug-ins In Startup", you may have to manually re-scan your VST plug-ins by going to Edit > Preferences > File - VST Settings and clicking [Reset All VST Plug-ins] and then clicking [Scan VST Folders].
|
gray36
Max Output Level: -83 dBFS
- Total Posts : 372
- Joined: 2010/03/12 10:22:18
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 11:00:07
(permalink)
I honestly can't help you, I don't recall what #s went with what! I just had to roll back the hotfixes, copy, paste, it asked to Copy And Replace, clicked on that, and it started Wizard to re-install. Sorry, this sucks for a lot of people.
HP Pavilion dv6 Intel Duo Core 2 2.20GHz T6600, Windows 7 x 64, Guitar tracks Pro 4, SonarX1dEXP,SonarX2Prod. 8.5.3, Focusrite Saffire 6 USB, JBL monitors, Alesis SR-16, Guitar Rig 4 Pro, PRS SE, Epiphone Les Paul Custom, Cort SJ-10 ,Steven Slate 3.5, Akai MPK25, Glyph GT 050Q (500GB)RP1000 http://soundcloud.com/mar...ayin-around-mix1
|
gray36
Max Output Level: -83 dBFS
- Total Posts : 372
- Joined: 2010/03/12 10:22:18
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 11:02:32
(permalink)
There ya go, happy endings! Problem people were having was not copying contents, and just the folder itself! Me included, all good now!
HP Pavilion dv6 Intel Duo Core 2 2.20GHz T6600, Windows 7 x 64, Guitar tracks Pro 4, SonarX1dEXP,SonarX2Prod. 8.5.3, Focusrite Saffire 6 USB, JBL monitors, Alesis SR-16, Guitar Rig 4 Pro, PRS SE, Epiphone Les Paul Custom, Cort SJ-10 ,Steven Slate 3.5, Akai MPK25, Glyph GT 050Q (500GB)RP1000 http://soundcloud.com/mar...ayin-around-mix1
|
stevec
Max Output Level: 0 dBFS
- Total Posts : 11546
- Joined: 2003/11/04 15:05:54
- Location: Parkesburg, PA
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 11:09:26
(permalink)
Problem people were having was not copying contents, and just the folder itself! Me included, all good now! Interestingly enough, when I figured out what CW was doing with the Quickfix installer, I actually chose to back up the entire folder(s) just in case. So I actually did copy the entire folder back and not just the contents. Go figure. 
SteveC https://soundcloud.com/steve-cocchi http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163 SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors; Focusrite 18i6 (ASIO); Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
|
Jesse G
Max Output Level: -32.5 dBFS
- Total Posts : 4282
- Joined: 2004/04/14 01:43:43
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 11:25:29
(permalink)
ohh My Goodness!! Why not just have an update that will over write the files and appy the correct settings regardless of if it were a quick fix or an update. Just apply and make it work. What is with these roll backs and all the copying and pasting.
One update one install period!
Oh by the way, my update worked when I installed it.
Peace
Peace,Jesse G.  A fisher of men <>< ==============================Cakewalk and I are going places together!
Cakewalk By Bandlab, Windows 10 Pro- 64 bit, Gigabyte GA-Z97X-SLI, Intel Core i5-4460 Haswell Processor, Crucial Ballistix 32 GB Ram, PNY GeForce GTX 750, Roland Octa-Capture, Mackie Big Knob, Mackie Universal Controller (MCU), KRK V4's, KRK Rockit 6, Korg TR-61 Workstation, M-Audio Code 49 MIDI keyboard controller.[/
|
jimmitch
Max Output Level: -90 dBFS
- Total Posts : 44
- Joined: 2010/02/22 09:27:09
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 11:27:55
(permalink)
gray36
There ya go, happy endings! Problem people were having was not copying contents, and just the folder itself! Me included, all good now!
That's right I'm glad I found this before I tried anything first. X1d is great it opened a file the crashed with pro-channel presets on it.
|
grayzer
Max Output Level: -85 dBFS
- Total Posts : 254
- Joined: 2003/11/07 07:12:09
- Location: IRELAND
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 11:51:31
(permalink)
Jesse G is absolutely correct. After this wait, having users of various levels of PC experience mess around with hotfixes etc is wrong (to put it mildly) . This update should install just as easily for those of us who kept up to date with our hot fixes. This is absolutely ridiculous. Plus I've been hunting around looking for the install instructions, ended up looking and finding them on the forum. Not good enough!!! I've always tried to be positive amongst all the snippy lil haters here but this is highly annoying. Anyway I'm gonna muddle thru with the install now...
Please listen to my band's new (post-prog rock?!) songs at www.reclaimmusic.com all produced using sonar X1!!
|
bluzdog
Max Output Level: -56 dBFS
- Total Posts : 1928
- Joined: 2007/10/06 17:15:14
- Location: Lakewood, Colorado
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 11:54:09
(permalink)
I followed the instructions installed the file with build 319 and I still get the error message. If I try to open Sonar PDR Expanded it asks for a registration number. When I paste the registration number I get a message that it's not correct. Any help would be appreciated.
Rocky
|
grayzer
Max Output Level: -85 dBFS
- Total Posts : 254
- Joined: 2003/11/07 07:12:09
- Location: IRELAND
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 11:59:25
(permalink)
Hmmm I see where I missed all the info about the hot fix rollbacks at the bottom on the knowledge page. Sheesh.
Please listen to my band's new (post-prog rock?!) songs at www.reclaimmusic.com all produced using sonar X1!!
|
grayzer
Max Output Level: -85 dBFS
- Total Posts : 254
- Joined: 2003/11/07 07:12:09
- Location: IRELAND
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 12:12:02
(permalink)
Ok it's installed, after a few attempts to get the right hotfix overwrite. This is gonna cause problems for some folks though!.
Please listen to my band's new (post-prog rock?!) songs at www.reclaimmusic.com all produced using sonar X1!!
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 12:20:09
(permalink)
grayzer
Jesse G is absolutely correct. After this wait, having users of various levels of PC experience mess around with hotfixes etc is wrong (to put it mildly) . This update should install just as easily for those of us who kept up to date with our hot fixes. This is absolutely ridiculous. Plus I've been hunting around looking for the install instructions, ended up looking and finding them on the forum. Not good enough!!! I've always tried to be positive amongst all the snippy lil haters here but this is highly annoying. Anyway I'm gonna muddle thru with the install now...
- It took me 3 mouse clicks to find this: http://www.cakewalk.com/P...pdates.aspx/2007013277 Installation instructions are at the bottom
having users of various levels of PC experience mess around with hotfixes etc is wrong in which case these users should, in my opinion, NOT be applying any sort of quick fix to start with! They all come with a warning from Cakewalk that you should only install them IF they address a specific issue that the quick fix solves.- I have absolutely no time for anyone who just downloaded the update and ran the .exe without a) reading the instructions, or b) doing a backup before starting. This is SOFTWARE we're talking about - anything that can possibly go wrong WILL go wrong.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
bluzdog
Max Output Level: -56 dBFS
- Total Posts : 1928
- Joined: 2007/10/06 17:15:14
- Location: Lakewood, Colorado
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 12:48:06
(permalink)
Bristol_Jonesey
grayzer
Jesse G is absolutely correct. After this wait, having users of various levels of PC experience mess around with hotfixes etc is wrong (to put it mildly) . This update should install just as easily for those of us who kept up to date with our hot fixes. This is absolutely ridiculous. Plus I've been hunting around looking for the install instructions, ended up looking and finding them on the forum. Not good enough!!! I've always tried to be positive amongst all the snippy lil haters here but this is highly annoying. Anyway I'm gonna muddle thru with the install now...
- It took me 3 mouse clicks to find this: http://www.cakewalk.com/Products/SONAR/X1-Producer/updates.aspx/2007013277 Installation instructions are at the bottom
-
having users of various levels of PC experience mess around with hotfixes etc is wrong
in which case these users should, in my opinion, NOT be applying any sort of quick fix to start with! They all come with a warning from Cakewalk that you should only install them IF they address a specific issue that the quick fix solves. - I have absolutely no time for anyone who just downloaded the update and ran the .exe without a) reading the instructions, or b) doing a backup before starting. This is SOFTWARE we're talking about - anything that can possibly go wrong WILL go wrong.
F.W.I.W........ I did read the instructions, read many posts and created a system restore point. Still no love here and Sonar is unuseable at this point for me. I must admit I'm not very tech savy but I haven't had problems like this ever. I've been a Sonar user since version 1. Rocky
|
dlesaux
Max Output Level: -70 dBFS
- Total Posts : 1034
- Joined: 2009/09/13 09:25:18
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 12:49:03
(permalink)
Another dumb question..
I alreday had build 425 so I didn't need to roll back my version but, did I still need to delete the contents of the Softube Saturation folder or is this only required if a version rollback was required? I installed the update and everything is working fine. Was there an update to the Saturation knob? I didn't see one listed..
I did read the instructions but - in my opinion - I don't think that's clear..
I can't tell if that Softube paragraph is part of the "To roll back from a quickfix build, do the following" section or, if it's a separate, required section..
Peace! Daniel Sonar Platinum - 2017.10 and PreSonus Studio One 3.5.5
Windows 10 64 bit
Studiocat Skylake Desktop PC with Intel i7 6700k processor @ 4.20 GHz / 16G RAM
Focusrite Scarlett 2i2 Audio Interface and Cakewalk UM-2G Midi Interface Check out my website
|
Re:X1 Expanded can not locate required version
2012/03/06 13:09:38
(permalink)
Hi Everyone, If you're having problems installing, can you try following the updated instructions posted the the X1d article? There's a .pdf with updated instructions that goes more in depth. To clarify, the softube part is a continuation off the QuickFix rollback process, hence why the step numbers continue sequentially. It is only required for SONAR X1 Producer Expanded customers however. Sorry for the confusion on that. In any case, please try following the instructions. Keep in mind that if this is absolutely not working for you because you have removed your backup files after installing a QuickFix, you could always uninstall and re-install SONAR. I'm willing to bet you could accomplish this faster then any of us could reply  Best regards,
|
dlesaux
Max Output Level: -70 dBFS
- Total Posts : 1034
- Joined: 2009/09/13 09:25:18
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 13:34:49
(permalink)
Thanks Ryan! So to be clear, I didn't need to do anything with the Softube folder since I was alreday on build 425, correct?
Peace! Daniel Sonar Platinum - 2017.10 and PreSonus Studio One 3.5.5
Windows 10 64 bit
Studiocat Skylake Desktop PC with Intel i7 6700k processor @ 4.20 GHz / 16G RAM
Focusrite Scarlett 2i2 Audio Interface and Cakewalk UM-2G Midi Interface Check out my website
|
bluzdog
Max Output Level: -56 dBFS
- Total Posts : 1928
- Joined: 2007/10/06 17:15:14
- Location: Lakewood, Colorado
- Status: offline
Re:X1 Expanded can not locate required version
2012/03/06 13:37:54
(permalink)
|
Re:X1 Expanded can not locate required version
2012/03/06 13:52:15
(permalink)
dlesaux
Thanks Ryan! So to be clear, I didn't need to do anything with the Softube folder since I was alreday on build 425, correct?
Correct. If you didn't install the QuickFix, then you don't need to really go to this folder. If you did delete the Saturation Knob.dll file, however, no big deal. The SONAR X1d installer will install a new Saturation Knob.dll if it's missing.
|