Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
X3 Midi Channel Color problem (Solved)
Hi there, Only on midi tracks ( not audio ) the color changing bar at the far left of the track won't stay open long enough to select a color. As you know, it opens on the release of the mouse button, not the initial down of the mouse button, but in my situation it closes right away, not leaving enough time to select a color. Using the inspector to change the color works but that's an extra bunch of work I'd rather not have to do. Audio tracks are fine and work as expected. Any thoughts about how to fix this without reinstalling X3 would be appreciated. Thanks!
post edited by Steve_Karl - 2014/08/20 06:00:46
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/24 13:13:56
(permalink)
i just tried this on a MIDI track. The color bar opened on the initial down click, not on the release, and stayed open until I chose a color. The same thing happened with a touchpad. That's the way it's supposed to work...not sure why yours doesn't work that way. Two questions: 1. If you open a new project, does this still happen? 2. Are you using a gaming mouse? Try a plain vanilla one and see what happens.
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/24 13:21:49
(permalink)
Yes. All projects. New or old. I tried every possible variation of new that I could think of and also resizing the track height and the width of the track view.
No gaming mouse. Very generic PS2 touch pad but I was using the left click button of the touch pad, not tapping the pad.
I think the real 'tell' here is that audio tracks aren't showing the same problem.
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/24 13:39:42
(permalink)
What happens if you use a conventional mouse? Not that there should be timing differences between MIDI and audio tracks... Has anyone else experienced this?
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/24 13:41:09
(permalink)
I'll try a traditional mouse when I get back home later tonight and let you know.
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/24 14:13:42
(permalink)
Just tried it out and it woks fine on MIDI tracks.
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/24 14:16:58
(permalink)
Thanks. Am I being paranoid, or is there a correlation between a proliferation of weird "corner cases" and Windows automatic updates...
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/24 15:11:27
(permalink)
Anderton Thanks. Am I being paranoid, or is there a correlation between a proliferation of weird "corner cases" and Windows automatic updates...
I don't know you well enough to comment. I do know that I have my Windows 8.1.1 Pro 64 bit set to not automatically update, I do it manually. I am notified but I decide what I will allow to be updated. My system is up to date.
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/24 16:19:29
(permalink)
Update: Tested with a generic USB mouse. Same exact results. Menu opens on mouse release, not on the down, and closes very rapidly. Windows Automatic Updates are always off here and I NEVER install optional updates.
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/27 10:36:47
(permalink)
Bump:
Is it worth calling Cakewalk on this?
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/27 11:13:32
(permalink)
Probably. This is extremely weird, I've never seen anyone else report anything like this.
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
Re: X3 Midi Channel Color problem
2014/07/27 11:15:11
(permalink)
Thanks for talking about it.
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
Re: X3 Midi Channel Color problem
2014/08/20 05:52:30
(permalink)
Update: (Solved) I got the time to call Cakewalk and Joey from Support was great. Very articulate and easy to talk with. He couldn't duplicate my issue so he sent me very good clean install instructions and the problem is now solved. No one knows why it originally went wonky but I'm going to check on it after ever tweak I do to make sure it's not something in how I set up X3.
post edited by Steve_Karl - 2014/08/20 06:01:13
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: X3 Midi Channel Color problem
2014/08/21 18:55:36
(permalink)
Thanks for circling back and letting us know how the situation resolved. It was definitely a "corner case."
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
Re: X3 Midi Channel Color problem
2014/08/21 20:31:51
(permalink)
Sure. No problem. Yea it was a real strange one.
|