CadErik
Max Output Level: -86 dBFS
- Total Posts : 216
- Joined: 2006/05/14 15:19:57
- Status: offline
X3e - Loop playback and recording - million thanks!
Finally the loop playback and recording are flawless! Million thanks for this. This is the IMO most significant update.
The only feature that is still left on my wish list is a freeze track that would account for side chaining...
Erik.
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 00:33:57
(permalink)
Was bashing on it today with equally good results so yes, sure seems like it's fixed.
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 09:46:38
(permalink)
First thing I did was run a "loop and punch" test; all good here!
Perfect sync every time.
I'm stoked!!
A big THANK YOU to the cake staff...
T
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM  RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
Noel Borthwick [Cakewalk]
Cakewalk Staff
- Total Posts : 6475
- Joined: 2003/11/03 17:22:50
- Location: Boston, MA, USA
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 09:51:47
(permalink)
☄ Helpfulby Guitarmech111 2014/03/20 09:57:23
Glad its working well. We put in a big investment to fix this with over a months work. The matrix of things to test is staggering.
The loop playback drift issue wasn't too bad to fix once we identified the root cause but the loop recording drift was a tough nut to crack.
|
Guitarmech111
Max Output Level: -24.5 dBFS
- Total Posts : 5085
- Joined: 2003/11/06 10:18:53
- Location: Bayou City, TX
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 10:00:42
(permalink)
Excellent!! I will hit that today.
Peace, Conley Shepherd Joyful Noise Productions PC config: (Win performance base score = 7.7) ASUS Sabertooth 990 FX -amd fx-8150 - core processor am3+ - 32G Corsair 1066 DDR3 - PNY GTX670 2g gddr5 - Corsair Force SSD 120G - Samsung 750G SATA drives - WD 1tb Black (Audio files) - WD 2TB for storage - RME UFX - USB ASIO 2/2016 drivers Win8  Without a mess, there is no message
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 10:00:57
(permalink)
I (We, I'm sure) appreciate the extra effort!
T
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
Noel Borthwick [Cakewalk]
Cakewalk Staff
- Total Posts : 6475
- Joined: 2003/11/03 17:22:50
- Location: Boston, MA, USA
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 10:02:23
(permalink)
☄ Helpfulby gswitz 2014/03/20 17:52:25
BTW the RME arm button delay was also fixed - see the release notes.
|
Guitarmech111
Max Output Level: -24.5 dBFS
- Total Posts : 5085
- Joined: 2003/11/06 10:18:53
- Location: Bayou City, TX
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 10:09:38
(permalink)
Noel Borthwick [Cakewalk]
BTW the RME arm button delay was also fixed - see the release notes.
yup. less than 2 seconds to arm all of my 16 enabled audio tracks. Many Thanks Noel. :)
Peace, Conley Shepherd Joyful Noise Productions PC config: (Win performance base score = 7.7) ASUS Sabertooth 990 FX -amd fx-8150 - core processor am3+ - 32G Corsair 1066 DDR3 - PNY GTX670 2g gddr5 - Corsair Force SSD 120G - Samsung 750G SATA drives - WD 1tb Black (Audio files) - WD 2TB for storage - RME UFX - USB ASIO 2/2016 drivers Win8 Without a mess, there is no message
|
Guitarmech111
Max Output Level: -24.5 dBFS
- Total Posts : 5085
- Joined: 2003/11/06 10:18:53
- Location: Bayou City, TX
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 10:09:38
(permalink)
Noel Borthwick [Cakewalk]
BTW the RME arm button delay was also fixed - see the release notes.
yup. less than 2 seconds to arm all of my 16 enabled audio tracks. Many Thanks Noel. :)
Peace, Conley Shepherd Joyful Noise Productions PC config: (Win performance base score = 7.7) ASUS Sabertooth 990 FX -amd fx-8150 - core processor am3+ - 32G Corsair 1066 DDR3 - PNY GTX670 2g gddr5 - Corsair Force SSD 120G - Samsung 750G SATA drives - WD 1tb Black (Audio files) - WD 2TB for storage - RME UFX - USB ASIO 2/2016 drivers Win8 Without a mess, there is no message
|
neirbod
Max Output Level: -84 dBFS
- Total Posts : 343
- Joined: 2005/05/09 12:27:26
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 10:16:24
(permalink)
Noel Borthwick [Cakewalk]
BTW the RME arm button delay was also fixed - see the release notes.
Saw that. Thanks!
----------------- Windows 7 64Sonar PlatinumIntel i7 3.4 GHzGigabyte GA-H67A-UD3H-B3 moboRME UFX and UCX
|
southpaw3473
Max Output Level: -75 dBFS
- Total Posts : 782
- Joined: 2008/04/22 16:50:41
- Location: Western MA
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 11:00:57
(permalink)
This was a HUGE fix!!!Thank you thank you thank you to everyone who worked so hard on an amazing patch!
We'll not risk another frontal assault-that rabbit's dynamite!!!
Tommy Byrnes Sonar Platinum Win 10 Pro x64 AMD FX 8350 Eight-Core 4.00GHz/ ASRock 970 Extreme4/ 16 gigs RAMUA Apollo Firewire/UA 2 Quad Satellite/ Focusrite OctoPre/Makie Onyx1220i Mixer THANK YOU!!!
|
FCCfirstclass
Max Output Level: -71 dBFS
- Total Posts : 969
- Joined: 2003/11/15 15:02:42
- Location: Las Vegas, Nevada
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 11:11:58
(permalink)
Noel Borthwick [Cakewalk]
BTW the RME arm button delay was also fixed - see the release notes.
Thanks Noel and all the bakers.
Win 10 Pro x64, 32Gb DDR3 ram, Sonar Platinum, Cubase 9.5, Mackie MCU Pro, Cakewalk VS 100, Roland Octa-Capture, A 800 Pro, Carver M-1.5t amp & C4000 pre amp, various mics, drums and brass instruments. And away we go!
|
RogerH
Max Output Level: -78 dBFS
- Total Posts : 608
- Joined: 2007/09/10 17:50:07
- Location: Norway
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 13:01:08
(permalink)
Noel Borthwick [Cakewalk]
BTW the RME arm button delay was also fixed - see the release notes.
Thanks. Very good news!
A song from my band: Terramater My soundcloud pageSonar Platinum Windows 7 Professional (SP1) 64Bit Intel Core i7 Quad Processor i7-2600K 3,4GHz MSI P67A-C45 (MOBO) Corsair Vengeance DDR3 1600MHz 8GB CL9 (2x4GB) Seagate Barracuda® 7200.12 1TB Seagate Barracuda® XT 2TB
[font="arial, sans-se
|
CadErik
Max Output Level: -86 dBFS
- Total Posts : 216
- Joined: 2006/05/14 15:19:57
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 15:35:50
(permalink)
Noel Borthwick [Cakewalk]
the loop recording drift was a tough nut to crack. I used to think my playing was *that* bad and always off time (yes really!).
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re: X3e - Loop playback and recording - million thanks!
2014/03/20 17:40:39
(permalink)
Noel Borthwick [Cakewalk]
BTW the RME arm button delay was also fixed - see the release notes.
Release Notes
Fixed delay on arming tracks with RME hardware. To enable faster track arming right click the record button and enable “allow arm changes on playback/record”
http://www.cakewalk.com/support/kb/reader.aspx/2007013361
This did it for me! Thanks for speaking up Noel!
post edited by gswitz - 2014/03/20 17:52:16
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|