greg54
Max Output Level: -79 dBFS
- Total Posts : 551
- Joined: 2011/01/27 18:13:52
- Status: offline
error with Platinum and Waves - SOLVED
I've been using Waves plugins with Sonar for years. I just purchased GRT3 and installed it from Waves Central. But it wasn't showing up in Platinum, so I did a scan of failed plugins. A window came up that said there was an error with waveshell, and I had to disable it. Now, none of Waves' plugins show up in Sonar. How do I enable my Waves plugins? Thanks, Greg
post edited by greg54 - 2017/10/24 14:38:19
Intel Core i7 4770 quad core 16 GB DDR3, 1600 MHz SDRAM 1T SSD; 2T 7200 GB HD'sWindows 10 Professional 64 bit Solid State Logic SSL2 interface Sonar Platinum
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: error with Platinum and Waves
2017/10/22 19:57:25
(permalink)
Hi. Just do a rescan, and include failed plugins. If the same message comes up again, click to not disable the WaveShell.
All the best.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
ampfixer
Max Output Level: -20 dBFS
- Total Posts : 5508
- Joined: 2010/12/12 20:11:50
- Location: Ontario
- Status: offline
Re: error with Platinum and Waves
2017/10/22 20:43:14
(permalink)
Be sure to D/L the newest Waveshell and run the install program. After you've done that and have your licenses available on the machine, cloud or USB stick, run the plug in manager and be sure to reset it so it will build a new plug in registry. If you don't see the new plug right away, try to toggle the display filter in the plug in browser between type and manufacturer. This will sometimes reveal a hidden plug.
Waves is one vendor that I always use the default locations during installs.
Regards, John I want to make it clear that I am an Eedjit. I have no direct, or indirect, knowledge of business, the music industry, forum threads or the meaning of life. I know about amps. WIN 10 Pro X64, I7-3770k 16 gigs, ASUS Z77 pro, AMD 7950 3 gig, Steinberg UR44, A-Pro 500, Sonar Platinum, KRK Rokit 6
|
greg54
Max Output Level: -79 dBFS
- Total Posts : 551
- Joined: 2011/01/27 18:13:52
- Status: offline
Re: error with Platinum and Waves
2017/10/22 21:13:21
(permalink)
Thanks, Zargg and ampfixer!
Greg
Intel Core i7 4770 quad core 16 GB DDR3, 1600 MHz SDRAM 1T SSD; 2T 7200 GB HD'sWindows 10 Professional 64 bit Solid State Logic SSL2 interface Sonar Platinum
|
greg54
Max Output Level: -79 dBFS
- Total Posts : 551
- Joined: 2011/01/27 18:13:52
- Status: offline
Re: error with Platinum and Waves
2017/10/23 01:19:29
(permalink)
Nothing is working. I even uninstalled and reinstalled Waves v9. When I scan, it keeps stopping at ig75icd32.dll. I have no idea what that is.
And a runtime error comes up. It's Cakewalk\SharedUtilities\BitBridge.exe. Again, I don't know what that is.
I don't know what to do at this point.
Greg
Intel Core i7 4770 quad core 16 GB DDR3, 1600 MHz SDRAM 1T SSD; 2T 7200 GB HD'sWindows 10 Professional 64 bit Solid State Logic SSL2 interface Sonar Platinum
|
ampfixer
Max Output Level: -20 dBFS
- Total Posts : 5508
- Joined: 2010/12/12 20:11:50
- Location: Ontario
- Status: offline
Re: error with Platinum and Waves
2017/10/23 06:04:55
(permalink)
Sounds like maybe it's an issue between 32 and 64 bit versions. Bitbridge is the program that allows you to run 32 bit plugs in a 64 bit system. I would Google the error report. If you just bought the plug-in then you should be able to contact Waves for assistance. You could always take a flyer at Cake tech support. They have a contact page.
Regards, John I want to make it clear that I am an Eedjit. I have no direct, or indirect, knowledge of business, the music industry, forum threads or the meaning of life. I know about amps. WIN 10 Pro X64, I7-3770k 16 gigs, ASUS Z77 pro, AMD 7950 3 gig, Steinberg UR44, A-Pro 500, Sonar Platinum, KRK Rokit 6
|
greg54
Max Output Level: -79 dBFS
- Total Posts : 551
- Joined: 2011/01/27 18:13:52
- Status: offline
Re: error with Platinum and Waves
2017/10/23 14:52:36
(permalink)
Intel Core i7 4770 quad core 16 GB DDR3, 1600 MHz SDRAM 1T SSD; 2T 7200 GB HD'sWindows 10 Professional 64 bit Solid State Logic SSL2 interface Sonar Platinum
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: error with Platinum and Waves
2017/10/23 20:18:31
(permalink)
greg54
Nothing is working. I even uninstalled and reinstalled Waves v9. When I scan, it keeps stopping at ig75icd32.dll. I have no idea what that is.
And a runtime error comes up. It's Cakewalk\SharedUtilities\BitBridge.exe. Again, I don't know what that is.
I don't know what to do at this point.
Greg
When I Google "ig75icd32.dll", it seems to be related to a Intel Graphics card. Do you have that? If so, perhaps try to update drivers? I may be way off on this, as I'm not a pc guy. Hope it helps. All the best.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
greg54
Max Output Level: -79 dBFS
- Total Posts : 551
- Joined: 2011/01/27 18:13:52
- Status: offline
Re: error with Platinum and Waves
2017/10/24 14:37:53
(permalink)
Thanks, Zargg. The issue was actually doing something someone had suggested (but not on this forum). Because I was having a problem with Superior Drummer 3, I was told to put my entire G:\ drive into the scan path in Sonar. When I deleted that scan path, everything worked.
Thanks!
Greg
Intel Core i7 4770 quad core 16 GB DDR3, 1600 MHz SDRAM 1T SSD; 2T 7200 GB HD'sWindows 10 Professional 64 bit Solid State Logic SSL2 interface Sonar Platinum
|