ProChannel Groups not saving with project

Author
Post
Essentials Only Full Version
BENT
Max Output Level: -83 dBFS
  • Total Posts : 355
  • Joined: 2013/03/25 05:40:49
  • Location: Somewhere over the Multiverse... la la la
  • Status: offline
2014/10/13 21:17:28 (permalink)
0

ProChannel Groups not saving with project

When I set a group in the PC (e.g. FX Chain enable) it works fine but on reopening project Group has disappeared over the event horizon into a black whole never to be seen again.
Is this a limitation ??? Thanks :)

I have empirical evidence this is true... (Bender told me!) 
Cakewalk by BandLab, Splat and other DAW's
PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, 
Monitors = 2 24” Samsung SA450 and 1 20” Dele
Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500,
Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
#1

7 Replies Related Threads
    BENT
    Max Output Level: -83 dBFS
    • Total Posts : 355
    • Joined: 2013/03/25 05:40:49
    • Location: Somewhere over the Multiverse... la la la
    • Status: offline
    Re: ProChannel Groups not saving with project 2014/10/13 22:03:12 (permalink)
    0
    Also can someone please confirm this behaviour... Thanks

    I have empirical evidence this is true... (Bender told me!) 
    Cakewalk by BandLab, Splat and other DAW's
    PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, 
    Monitors = 2 24” Samsung SA450 and 1 20” Dele
    Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500,
    Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
    #2
    scook
    Forum Host
    • Total Posts : 24146
    • Joined: 2005/07/27 13:43:57
    • Location: TX
    • Status: offline
    Re: ProChannel Groups not saving with project 2014/10/13 22:06:32 (permalink)
    0
    Yes, grouping Disable/Enable buttons of FX Chains in the ProChannel are lost when re-opening a project.
    #3
    BENT
    Max Output Level: -83 dBFS
    • Total Posts : 355
    • Joined: 2013/03/25 05:40:49
    • Location: Somewhere over the Multiverse... la la la
    • Status: offline
    Re: ProChannel Groups not saving with project 2014/10/13 22:12:33 (permalink)
    0
    Thanks scook 
     
    Strange that would be the case though!

    I have empirical evidence this is true... (Bender told me!) 
    Cakewalk by BandLab, Splat and other DAW's
    PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, 
    Monitors = 2 24” Samsung SA450 and 1 20” Dele
    Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500,
    Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
    #4
    scook
    Forum Host
    • Total Posts : 24146
    • Joined: 2005/07/27 13:43:57
    • Location: TX
    • Status: offline
    Re: ProChannel Groups not saving with project 2014/10/13 22:26:33 (permalink)
    0
    I only confirmed the behavior. IDK if it is by design. Please feel free to write it up in http://forum.cakewalk.com/Problem-Reports-f77.aspx or I can move this thread over there, if you wish.
    #5
    BENT
    Max Output Level: -83 dBFS
    • Total Posts : 355
    • Joined: 2013/03/25 05:40:49
    • Location: Somewhere over the Multiverse... la la la
    • Status: offline
    Re: ProChannel Groups not saving with project 2014/10/13 22:29:27 (permalink)
    0
    Yes Please, and thanks once again for your knowledge sharing and time.

    I have empirical evidence this is true... (Bender told me!) 
    Cakewalk by BandLab, Splat and other DAW's
    PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, 
    Monitors = 2 24” Samsung SA450 and 1 20” Dele
    Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500,
    Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
    #6
    scook
    Forum Host
    • Total Posts : 24146
    • Joined: 2005/07/27 13:43:57
    • Location: TX
    • Status: offline
    Re: ProChannel Groups not saving with project 2014/10/13 22:44:06 (permalink)
    0
    Moved at user request. I don't believe this issue is unique to FX Chains in the PC. Other modules group settings are lost too. There was an unusual case with the PC4K Exp/Gate on two tracks, the group would persist on one track but not the other.
    #7
    Splat
    Max Output Level: 0 dBFS
    • Total Posts : 8672
    • Joined: 2010/12/29 15:28:29
    • Location: Mars.
    • Status: offline
    Re: ProChannel Groups not saving with project 2015/02/10 14:38:13 (permalink)
    0
    Is this still the case in Platinum...
     
    Regardless we please have a CWBRN number?
     
    http://forum.cakewalk.com/Problem-Reports-f77.aspx
     
    Thanks...
     
    post edited by Wookiee - 2015/02/12 12:09:10

    Sell by date at 9000 posts. Do not feed.
    @48/24 & 128 buffers latency is 367 with offset of 38.

    Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
    #8
    Jump to:
    © 2025 APG vNext Commercial Version 5.1