have anyone tested a pro300/500/900 with win10?

 
Hi,
A Pro 800 (current product) currently does not work in Win10. Allegedly drivers are "under testing"
I'm hoping this is a very poorly worded suggestion that the drivers are being worked on. However the latest legend on their website suggests otherwise.
Roland driver advice seems to imply that they cannot be bothered to make their devices compatible.
Roland appear to have stuck two fingers up at their customers, and I hope they lose most of them if this attitude continues:
Note the legends, no suggestion of drivers in development
Google this:  Roland support news 250024
 
Quote:
"Legend
Yes: Compatible Compatible with Windows(R) 10 64-bit Edition / 32-bit Edition
 
Limited: Limited compatibility Compatible with Windows(R) 10 64-bit Edition / 32-bit Edition with limited operation
 
No: No plan for compatible version
We are sorry but we have no plan to make it compatible with Windows(R) 10 64-bit Edition / 32-bit Edition"
 

azslow3
Rob, have you really tested that it does not work as a control surface in SONAR? I am almost sure it should work as MIDI keyboard in Standard mode (see page 65 in the manual). It can be some milliseconds slower (it at all, I have not managed to notice the difference with my A500S), but it is using standard drivers in this case. Many boards (Launchkey for example) have no "special" mode/driver at all and it seems like people are still happy.

I haven't tried that, I am not bothered particularly about that functionality. Though I have seen comments from people complaining about the functionality in Sonar I have not tested this for myself.
 
Much, much more important is getting it to work at all in Win10.
Currently the drivers stall during install, as do several other Roland drivers it seems.
I would add a link to the Win10 driver status but this site wont let me.
Google this:  Roland support news 250024

 

Current state of play:

MIDI Keyboard Controller

Model name Hardware & Driver Exclusive Software Remarks A-300PRO A-500PRO A-800PRO Under testing No Exclusive Software:            

• A-PRO Editor : Sorry but it is out of support.
• A-PRO Control Surface Plug-in for SONAR : Sorry but it is out of support.

Rob James G
 
Hi,
A Pro 800 (current product) currently does not work in Win10. Allegedly drivers are "under testing"
I'm hoping this is a very poorly worded suggestion that the drivers are being worked on. However the latest legend on their website suggests otherwise.
Roland driver advice seems to imply that they cannot be bothered to make their devices compatible.
Roland appear to have stuck two fingers up at their customers, and I hope they lose most of them if this attitude continues:
Note the legends, no suggestion of drivers in development
Google this:  Roland support news 250024
 

The short answer is it's not quite ready yet. Until the drivers are ready everything writen above can be regarded as pure speculation.

musichoo
Just did a short test. The transport worked. It seems like ACT is no longer working. Faders are hardwired to volume and knobs to pan.

Cheers I tried the special "normal mode" in Windows 7. I could get some programs to take CC mapping others would not. All the programs in question take CC mapping with the proper Roland driver.
Hopefully they will have that working soon.
Presumably this cut down "normal mode" works the same in Win10 as Win7?
 
A real shame that they aren't going to make the rest of the software work. They should be obliged to make the driver work though, as it is still a current product.  

Doktor Avalanche

Rob James G

musichoo
Just did a short test. The transport worked. It seems like ACT is no longer working. Faders are hardwired to volume and knobs to pan.

Cheers I tried the special "normal mode" in Windows 7. I could get some programs to take CC mapping others would not. All the programs in question take CC mapping with the proper Roland driver.
Hopefully they will have that working soon.
Presumably this cut down "normal mode" works the same in Win10 as Win7?
 
A real shame that they aren't going to make the rest of the software work. They should be obliged to make the driver work though, as it is still a current product.  

Again the driver has not been released, you are probably using the MS driver. I've never found a use with the other software, esp when using Sonar.

You really shouldn't reply without reading posts in the thread properly first. This is an unfortunate mix of ignorance and arrogance.
 
You'll make yourself look rather silly.

We will just have to wait Roland come out with their drivers. Honestly I had hardy use the accompanying software or plugins. The win10 driver will do for me.

I'm a bit confused with Roland's status for the A-Pro series. They say that the driver is under investigation but they also say that there's no support for the A-Pro editor or as a control surface for Sonar. I thought that was what the driver was for. WTF?

Ok ,I got my A-Pro 800 apro_w81d_v102 drivers installed in Win 10 after reading this thread
 http://forum.cakewalk.com/How-to-use-V700-win-8-driver-in-win-10-m3206046.aspx
and everything works perfectly :-)
After reading that thread I thought this may work for the A-Pro installers and it did !!
All the best
Jan

Doktor Avalanche

Rob James G
You really shouldn't reply without reading posts in the thread properly first. This is an unfortunate mix of ignorance and arrogance.
 
You'll make yourself look rather silly.

When you come up with rude statements like that you should really explain yourself. What part of .. 'Official Roland drivers are not released yet' do you not understand and what is my supposed arrogance and ignorance?

From memory I don't even think the rest of the software works properly in windows 8, and it certainly isn't required for Sonar, the act software is embedded inside Sonar. I've never needed to install it and it works fine in Sonar/windows 8 just fine.

Pray please do enlighten my ignorent stupidy. If I have made a mistake I would prefer to know what it is rather than be insulted... Many thanks...

I should explain myself?
You immediately piled in with a response which didn't make sense within the context of the thread. If only you could bother to read the rest of the posts you would understand.
 
Never mind reading a whopping whole page though before making comments out of context again.
 
All you need to know is that Roland is working on a new driver but has dropped support for the extra software  (A-Pro editor and control surface for Sonar). The new driver is still "under testing".
 Meanwhile some forums (here and elsewhere) users have modified the Win8 drivers to get them working in 10, 
 in advance of proper drivers from Roland. 
So there are now at least two ways to get it working now in Win 10 before official driver support is completed.
Modified drivers and switching the keyboard to "normal mode" from the standard "advanced mode". This is described in the manual and discussed in this thread.   
 
Roland have upset a lot of their customers by dropping support for several other devices altogether and dropping support for the extra software on A-800.
At least we can help some users to get their now completely unsupported keyboards working with the generic "normal mode" driver. I have done this already.  
 
 
 
 
 
 
 

Again I wrote earlier I don't think the additional software is required for act, it is embedded in Sonar. I don't even believe the additional software even works well in windows 8. All you need is the official Roland drivers which are under testing (which will obviously be released at some stage). So what exactly is there to be upset about? Are you saying what I am saying is incorrect?

Otherwise (again) what on earth are you taking issue with?

I wrote a response in the context of what you wrote below. I directly quoted you.

Rob James G
 
Hi,
A Pro 800 (current product) currently does not work in Win10. Allegedly drivers are "under testing"
I'm hoping this is a very poorly worded suggestion that the drivers are being worked on. However the latest legend on their website suggests otherwise.
Roland driver advice seems to imply that they cannot be bothered to make their devices compatible.
Roland appear to have stuck two fingers up at their customers, and I hope they lose most of them if this attitude continues:
Note the legends, no suggestion of drivers in development
Google this:  Roland support news 250024
 
Quote:
"Legend
Yes: Compatible Compatible with Windows(R) 10 64-bit Edition / 32-bit Edition
 
Limited: Limited compatibility Compatible with Windows(R) 10 64-bit Edition / 32-bit Edition with limited operation
 
No: No plan for compatible version
We are sorry but we have no plan to make it compatible with Windows(R) 10 64-bit Edition / 32-bit Edition"
 

Doktor Avalanche

Rob James G
Doktor,
I mean to be helpful, you clearly mean to be helpful too.
Let's try to live by your slogan.
 

Then please don't tell people they are ignorent and arrogant, and then fail to pinpoint exactly what it is they are supposed ignorent and arrogant about. That is not peace and love. Many thanks.

 
Still on the attack?
I give up. Read the whole thread properly, or not.
Peace be with you.   

You started on the attack, your first post in this thread was attack.
Your second post (on the attack again) proved you weren't interested in following the thread properly but you still felt like attempting to undermine what I was saying.
If you want any further explanation you should read the thread from the top, it's not long.
 
Now in the words of Dave Allen "Goodnight, thank you, and may your God go with you."