anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
I am unfamiliar with the jargon, so please explain it clearly!!! i have connected the computer USB to the midi in and out. i don't have a clue which studio page i should be on! i have never used the software before what i want to do is send the setting for each tune to the computer, then before i play that tune i send the settings back to the yamaha. might be using a sequencer? thanks all
post edited by anon125 - 2011/09/10 15:38:54
|
heydan
Max Output Level: -88 dBFS
- Total Posts : 149
- Joined: 2010/10/20 10:44:35
- Location: USA
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 17:35:24
(permalink)
Hey, anon125, welcome to the forum. A good starting place for you is to post your basic system specs (see my system specs at bottom of signature for example) so we can narrow down the questions. First question is- as your keyboard has no USB port, how are you connecting your midi keyboard to a computer USB; a soundcard/mixer interface or a hardware midi/USB converter?
Best, HeyDan
Win 10x64, GigabyteGA-990FXA-UD5, AMD 4.0 Ghz 8core,32G DDR3, Geforce GT630/dual mons, 750G+1T/7200rpm HD, 650WPS, Outboard: Focusrite Saffire 24Pro DSP, mixer-Yamaha MG102c, keyboards-Yamaha PSR E-423, Korg R3 Software: 8.5.3 Prod, X1d Exp, X2aProd, X3e Prod, SonPlat-2016.12 CbB & some plugins.
[/[/
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 18:51:01
(permalink)
anon125
I am unfamiliar with the jargon, so please explain it clearly!!!
i have connected the computer USB to the midi in and out.
i don't have a clue which studio page i should be on!
i have never used the software before
what i want to do is send the setting for each tune to the computer, then before i play that tune i send the settings back to the yamaha.
might be using a sequencer?
thanks all
You will want to have a sysex dump from the Yamaha to X1. Look up sysex in the help file and the manual.
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 18:51:10
(permalink)
the keyboard has an in and out midi.
it is connected to the USB port on the computer.
thanks
PS tech data not needed.
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 18:52:56
(permalink)
|
Stone House Studios
Max Output Level: -40 dBFS
- Total Posts : 3550
- Joined: 2004/05/07 15:07:32
- Location: Natural Bridge, VA USA
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 18:55:45
(permalink)
anon125
the keyboard has an in and out midi.
it is connected to the USB port on the computer.
thanks
PS tech data not needed.
I think you want to move the "songs" you have recorded in your Yamaha to midi tracks in Sonar? You may have to "play' them to Sonar while recording midi, or, use Sonar as the recording device to begin with.
Core i7-6700@3.40Ghz Windows 10x64 16 GB RAM Sonar Platinum/Studio One PreSonus Studio 192
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 19:03:54
(permalink)
I don't think so. each tune we play has it's own instruments, beat etc. we wish to save each one on the computer - sonic X! studio, so we can then reload the settings to the keyboard before playing the tune. - on the keyboard - not using sonic then. we did this decades ago when cakewalk was on 5inch floppies! thanks
post edited by anon125 - 2011/09/10 19:04:56
|
jbow
Max Output Level: -0.2 dBFS
- Total Posts : 7601
- Joined: 2003/11/26 19:14:18
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 19:10:55
(permalink)
I use a PSR-2100. You can record midi or you can record audio... or you can disable "local control" and use it and a midi controller for softsynths. If you use it through the midi, it will playback through it's speakers when you replay. If you record it will just record an audio track like a guitar or vocal.
Julien
Sonar Platinum Studiocat Pro 16G RAM (some bells and whistles) HP Pavilion dm4 1165-dx (i5)-8G RAM Octa-Capture KRK Rokit-8s MIDI keyboards... Control Pad mics. I HATE THIS CMPUTER KEYBARD!
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 19:12:36
(permalink)
Use this Sysx for Sonar. Page 1066.
If you have MIDI files on your hardware synth you will want to transfer them to the Sonar. Sysex is is used to save user patches and other setup data for the synth. It can be sent to Sonar as a sysex dump.
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 19:23:50
(permalink)
Use this Sysx for Sonar. Page 1066. where is that page! the yamaha manual has only 90 pages and i don't see page numbers in sonar. 1 looked in the forum and where in sonar do i find what i send. thanks
post edited by anon125 - 2011/09/10 19:31:09
|
Stone House Studios
Max Output Level: -40 dBFS
- Total Posts : 3550
- Joined: 2004/05/07 15:07:32
- Location: Natural Bridge, VA USA
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 19:50:17
(permalink)
we wish to save each one on the computer - sonic X! studio, so we can then reload the settings to the keyboard before playing the tune. - on the keyboard - not using sonic then. John seams to be on the right path here - you want something that saves your Yamaha based songs - a librarian of some sort. Sonar can take your sysex files as a dump, but is probably not the thing you are looking for (I think.) Brian
Core i7-6700@3.40Ghz Windows 10x64 16 GB RAM Sonar Platinum/Studio One PreSonus Studio 192
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 20:02:53
(permalink)
anon125
Use this Sysx for Sonar. Page 1066.
where is that page!
the yamaha manual has only 90 pages and i don't see page numbers in sonar. 1 looked in the forum
and where in sonar do i find what i send.
thanks
The Sonar X1 reference manual. Its a PDF and can be searched. It has over 1800 pages. Your synth manual can only tell you how to dump sysex. It can not tell you how to receive it. Everything you want to do can be done with X1. But you need to read how.
|
Stone House Studios
Max Output Level: -40 dBFS
- Total Posts : 3550
- Joined: 2004/05/07 15:07:32
- Location: Natural Bridge, VA USA
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 20:13:23
(permalink)
Your synth manual can only tell you how to dump sysex. It can not tell you how to receive it. Is a sysex dump really the best way to bring songs (projects) in and out of a synth?
Core i7-6700@3.40Ghz Windows 10x64 16 GB RAM Sonar Platinum/Studio One PreSonus Studio 192
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 20:14:31
(permalink)
no i do not want to record what i play
thanks
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 20:17:29
(permalink)
Everything you want to do can be done with X1. But you need to read how.
That is why i used the forum! got the pdf and found the page 1066 - don't understand it - but i have it! http://www.cakewalk.com/Support/kb/reader.aspx/2007013228 yes the yamaha has to send the settings and the sonic receive them. then later the sonic will send them and the yamaha receive them. i justy need to know how! thanks
post edited by anon125 - 2011/09/10 20:21:53
|
Stone House Studios
Max Output Level: -40 dBFS
- Total Posts : 3550
- Joined: 2004/05/07 15:07:32
- Location: Natural Bridge, VA USA
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 20:18:46
(permalink)
anon125
no i do not want to record what i play
thanks
no i do not want to record what i play thanks Why do you want a DAW?
Core i7-6700@3.40Ghz Windows 10x64 16 GB RAM Sonar Platinum/Studio One PreSonus Studio 192
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 20:30:16
(permalink)
anon125
Everything you want to do can be done with X1. But you need to read how. That is why i used the forum!
got the pdf and found the page 1066 - don't understand it - but i have it!
http://www.cakewalk.com/Support/kb/reader.aspx/2007013228
yes the yamaha has to send the settings and the sonic receive them.
then later the sonic will send them and the yamaha receive them.
i justy need to know how!
thanks
What is sonic? Although the forum can do a lot in teaching how to do things its not meant to be a tutorial on Sonar. I would very much like to go through how to do this but its more difficult to explain then it would be for you to read about it in the manuals. If you have a specific question I may be able to answer. At present its much to much to relate. Also you need to know how your synth can dump its data. I can't tell you that.
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 21:02:08
(permalink)
Well, thanks i did NOT ask for a tutorial on all there is to sonar. but here is how you can help in Sonar we want to end up with a list of tunes - with their settings, beat, voice etc. so we can select one and then send it to the yamaha. where in Sonar X1 Studio will i find the page where they were sent to? Sonar has soooooooooooooo many functions and settings etc. we just need one - but the right one thanks John PS and if you know the trick to stop the box popping up all the time "conexant pebble high definition smart audio" please let me know!- i have no idea what to do with it - press yes? press no? neither stop it coming back
post edited by anon125 - 2011/09/10 21:03:18
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 21:06:58
(permalink)
Data that can be loaded to the PSR-E313/YPT- 310 from a computer • Songs : 99 Songs max (Song numbers 108–) • Data : 373 kilobytes • Data Format : SMF Format 0 • File : 07PK3.BUP (Backup file) : ***.mid (MIDI Song) : ***.sty (Style File)
|
Stone House Studios
Max Output Level: -40 dBFS
- Total Posts : 3550
- Joined: 2004/05/07 15:07:32
- Location: Natural Bridge, VA USA
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 21:19:05
(permalink)
in Sonar we want to end up with a list of tunes - with their settings, beat, voice etc. so we can select one and then send it to the yamaha. where in Sonar X1 Studio will i find the page where they were sent to? Sonar does not do what you want the way you want it done. Wrong software. Brian
Core i7-6700@3.40Ghz Windows 10x64 16 GB RAM Sonar Platinum/Studio One PreSonus Studio 192
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 21:52:01
(permalink)
Stone House Studios
in Sonar we want to end up with a list of tunes - with their settings, beat, voice etc. so we can select one and then send it to the yamaha. where in Sonar X1 Studio will i find the page where they were sent to?
Sonar does not do what you want the way you want it done. Wrong software.
Brian
Okay - what do you reccomend?
thanks
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 22:20:51
(permalink)
It might do at least some of what you want using play lists. However you will need to set up each project for this sort of use. Sending sysex is not a problem for a project to set up the hardware via the play list.
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 22:25:25
(permalink)
Thanks - i will look up playlists in sonar UPDATE all i find is publishing songs to the internet. how do i get a refund? thanks
post edited by anon125 - 2011/09/10 22:28:52
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 22:32:16
(permalink)
I don't know how you do your research but play lists are very much not about the internet.
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 23:32:07
(permalink)
Publishing music on the Internet Cakewalk Publisher allows you to easily present and share your music online. With Cakewalk Publisher, you can create a customized streaming music player with a playlist of your music, upload it to your personal or band's website, and embed it in any other website.
and
Once your player has been configured and your playlist is put together, click Publish to upload your files to the Internet in the large pdf the ONLY mention of playlists was in regard to the internet
your condesending post merits an apology from you.
post edited by anon125 - 2011/09/10 23:34:59
|
Stone House Studios
Max Output Level: -40 dBFS
- Total Posts : 3550
- Joined: 2004/05/07 15:07:32
- Location: Natural Bridge, VA USA
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 23:43:15
(permalink)
how do i get a refund? thanks Call Cakewalk. Problem is that the software does what it says it will do - so you won't have much ground to stand on. Play lists play projects one after the other - and you can program each project to dump a sysex to your keyboard, but, you will have to navigate how to send and recieve sysex from your synth - which has little to do with Sonar. Brian
Core i7-6700@3.40Ghz Windows 10x64 16 GB RAM Sonar Platinum/Studio One PreSonus Studio 192
|
Susan G
Max Output Level: 0 dBFS
- Total Posts : 12016
- Joined: 2003/11/05 22:49:26
- Location: Putnam County, NY
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/10 23:52:09
(permalink)
anon125
Publishing music on the Internet Cakewalk Publisher allows you to easily present and share your music online. With Cakewalk Publisher, you can create a customized streaming music player with a playlist of your music, upload it to your personal or band's website, and embed it in any other website.
and
Once your player has been configured and your playlist is put together, click Publish to upload your files to the Internet
in the large pdf the ONLY mention of playlists was in regard to the internet
your condesending post merits an apology from you.
Try searching the PDF for "play list"; i.e., as 2 words. I don't have the same version you do so I can't give you a page #, but you should find something on the "Play List View", which is what Brian's describing. -Susan -Susan
2.30 gigahertz Intel Core i7-3610QM; 16 GB RAMWindows 10 x64; NI Komplete Audio 6.SONAR Platinum (Lexington) x64
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/12 11:38:32
(permalink)
thanks
play list view is on page 1795.
doesn't seem to do what i need.
suggestions welcome before i try for a refund.
we wish to send the system exlusive?? settings for each tune from the yamaha to sonar X1 Studio.
then in sonar end up with a list of tunes. so that we can set the keyboard up with the selected settings for each tune by sending them from Sonar.
we are NOT recording the notes, just the voice, beat etc settings
thanks again
|
Susan G
Max Output Level: 0 dBFS
- Total Posts : 12016
- Joined: 2003/11/05 22:49:26
- Location: Putnam County, NY
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/12 13:29:52
(permalink)
The Sysx View (note CW's spelling for lookup in the PDF) will let you store & send up to 256 banks of settings, but as other have said, you need to know how to dump those settings from your Yamaha first in order to save them there. See if the Yamaha manual says anything about how to do a "bulk dump".
If you can't do a "bulk dump" from the Yamaha that Sysx View won't do you any good, but otherwise it can act as a librarian for saving different song settings which you can send back to your keyboard as needed.
-Susan
2.30 gigahertz Intel Core i7-3610QM; 16 GB RAMWindows 10 x64; NI Komplete Audio 6.SONAR Platinum (Lexington) x64
|
anon125
Max Output Level: -89 dBFS
- Total Posts : 52
- Joined: 2011/09/10 13:35:30
- Status: offline
Re:how do i transfer settings from the yamaha psr e313 to sonar X1 studio?
2011/09/12 14:13:21
(permalink)
yes i can do the bulk dump from the yamaha
but i need to know what to do in sonar X1 studio to get a list
thanks
|