musaed
Max Output Level: -90 dBFS
- Total Posts : 50
- Joined: 2015/06/03 19:02:46
- Status: offline
how to record multiple tracks at once in sonar?
Help me guysI have a Yamaha MG10XU mixer And komplete audio 6 Now i want in a track one to be my Yamaha MG10XU, Picking my vocal signal as a stereo. And Track tow my komplete audio 6. So it pick a stereo signal from my Yamaha s970 keyboard. So in that case i can record multiple track as a stereo simultaneously?
post edited by musaed - 2017/10/18 06:22:12
|
karhide
Max Output Level: -81 dBFS
- Total Posts : 457
- Joined: 2007/03/30 04:22:13
- Location: Southampton / Paris
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 05:51:29
(permalink)
I have never used that and looking at the spec it is only a 2 in 2 out USB device so you might be able to record 2 mono channels one panned hard left and the other panned hard right. But sounds like time to read the manual.
Studio: Sonar Platinum/Cakewalk by Bandlab Intel Core i7 32GB RAM Samsung Evo 1TB system drive Windows 10 64bit - RME FireFace UFX - Focusrite OctoPre MK II - Audient Mico Mobile: Sonar Platinum/Cakewalk by Bandlab Intel Core i7 8GB RAM Samsung Evo 1TB system drive Windows 10 64bit - RME FireFace 400 Mobile2: Cakewalk by Bandlab Intel Core i7 8GB RAM 256 GB System Drive Windows 10 64 bit http://www.karhide.co.uk/https://karhide.bandcamp.com
|
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
- Total Posts : 26036
- Joined: 2006/09/17 11:23:23
- Location: Everett, WA USA
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 13:44:42
(permalink)
I have the same mixer. Yes, you can do it but you'll have to route the vocal mic (and only the mic, not the s970) to the Monitor output and send the mixer's monitor output directly to a third input on your audio interface.
 All else is in doubt, so this is the truth I cling to. My Stuff
|
THambrecht
Max Output Level: -73 dBFS
- Total Posts : 867
- Joined: 2010/12/10 06:42:03
- Location: Germany
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 13:44:47
(permalink)
You can record as many tracks as you want simultaneously. Just make the tracks hot for recording and choose the input source for each track.
The number of inputs you can record is only limited by the input channels of your audiointerface. SONAR does not limit.
We digitize tapes, vinyl, dat, md ... in broadcast and studio quality for publishers, public institutions and individuals.4 x Intel Quad-CPU, 4GHz Sonar Platinum (Windows 10 - 64Bit) and 14 computers for recording tapes, vinyl ...
4 x RME Fireface 800, 2 x Roland Octa Capture and 4 x Roland Quad Capture, Focusrite .... Studer A80, RP99, EMT948 ...
(Germany) http://www.hambrecht.de
|
Unknowen
Max Output Level: -65 dBFS
- Total Posts : 1276
- Joined: 2014/11/07 11:27:09
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 14:17:19
(permalink)
Are you asking for help with setting up your audio interface to work in Sonar or are you asking for help routing to your audio interface? Peace! 
Hay look, Somethings are not locked in stone... lol 3/18/2019
|
musaed
Max Output Level: -90 dBFS
- Total Posts : 50
- Joined: 2015/06/03 19:02:46
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 15:12:52
(permalink)
11Dreams
Are you asking for help with setting up your audio interface to work in Sonar or are you asking for help routing to your audio interface?
Peace!
Both, in sonar asio show me the Yamaha mixer with only with stereo and both left and right as input. so i can't record multiple track as an a stereo at the same time. So i think and trying to connect tow interface at the same time. but i get distortion signal. i search in YouTube i fund it maybe the problem from clock or something. I'm new in this stuff i really need help
|
THambrecht
Max Output Level: -73 dBFS
- Total Posts : 867
- Joined: 2010/12/10 06:42:03
- Location: Germany
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 15:51:04
(permalink)
As I know, with normal ASIO drivers you can only connect one audiocard.
I think you have to use WDM to connect two audiointerfaces. 2 audiointerfaces at the same time is not very stable.
We digitize tapes, vinyl, dat, md ... in broadcast and studio quality for publishers, public institutions and individuals.4 x Intel Quad-CPU, 4GHz Sonar Platinum (Windows 10 - 64Bit) and 14 computers for recording tapes, vinyl ...
4 x RME Fireface 800, 2 x Roland Octa Capture and 4 x Roland Quad Capture, Focusrite .... Studer A80, RP99, EMT948 ...
(Germany) http://www.hambrecht.de
|
Joe_A
Max Output Level: -81 dBFS
- Total Posts : 458
- Joined: 2008/07/06 23:16:14
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 16:15:04
(permalink)
In a different manner - I route the outputs of one AI on my desktop into two inputs of my main AI on my laptop, effectively giving me tracks from both AIs.
If I desired I could run all individual outputs, I believe there are 6, into main AI inputs giving me all of desktop Al's tracks plus all other main AI inputs.
I do this routinely without problems. But it takes two computers.
jambrose@cfl.rr.com Sonar Plat. Lifetime. Started in Sonar 4, each through 8.5.3PE. Scarlett 18i202nd gen., Edirol FA-101, M-Audio Firewire 410, AMD Phenom II 1045T six core processor, 8GB DDR3, AMD Radeon HD 6450, dual displays, 1.5 TB SATA HD, USB 2, Firewire 1394A, 1394B, 18/22 mixer, EV Q-66, Yamaha HS50M monitors, few guitars, Fender Cybertwin SE, Fender Cyber foot controller, Boss RC20-XL, misc pedals, etc. Win Home Prem 64 bit.
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 17:03:48
(permalink)
Your Yamaha will use the same Stienberg ASIO driver my bands Yamaha mixer uses,, I guess. Its actually a real good driver. possibly the same one used for the Stienberg U series interfaces.
In the track input dialog choices you should have
Yamaha ASIO left
Yamaha ASIO right
Yamaha stereo
But I wonder why you want to use that when it makes more sense to just plug your mike directly into your audio interface? The pre amps are probably the same quality so nothing is gained from using the Yamaha mixer. The interface has the audio intputs for both your mike and your stereo keyboard.
Your Keyboard has USB output, does that not send the audio from the keyboard,, or just midi? It also has DIN midi jack and your interface as well sports DIN midi.
There could be the option of recording midi and then turning that into something much better sounding using Sonars VST's.. that would be my chioce. You could record both the audio and the midi too.
Note- only one ASIO device can be used at a time so you are better off to leave the Yamaha mixer out of the picture. You could use it to add 2 more channels using WDM mode if your recording a band or more people at the same time. That's how I use mine.
My choice with what you have would be to use your Interface.
Plug the Vocal mike into CH 1
The Keyboard into 3/4 on the back
And also have the MIDI either USB or DIN hooked up. Not sure if full performances from the keyboard are transmitted as multi track midi but my guess is it does.
|
musaed
Max Output Level: -90 dBFS
- Total Posts : 50
- Joined: 2015/06/03 19:02:46
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 18:25:41
(permalink)
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 18:59:02
(permalink)
Delete, was obviously a big waste of 20 minutes.
post edited by Cactus Music - 2017/10/19 03:50:16
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 19:46:10
(permalink)
Why do you have 2 threads with the same question?
|
musaed
Max Output Level: -90 dBFS
- Total Posts : 50
- Joined: 2015/06/03 19:02:46
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 20:58:21
(permalink)
Cactus Music
Why do you have 2 threads with the same question?
Oh sorry for tow threads. by mistake . so can you help me a vedio call so i can learn from you and i cut the time for searching? i mean if you got time
|
musaed
Max Output Level: -90 dBFS
- Total Posts : 50
- Joined: 2015/06/03 19:02:46
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 21:11:38
(permalink)
i use this komplete audio 6
as my seconder interface with yamaha mixer, then i use asio for all. it did work now im recording tow track at the same time both are stereo. But i want to know if it wrong?
Or just tell my how i start over with new equipment.
Just give me the name and the steps.
|
Unknowen
Max Output Level: -65 dBFS
- Total Posts : 1276
- Joined: 2014/11/07 11:27:09
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/18 21:39:19
(permalink)
For now you just need to understand how to hook your stuff up. The mixer is not important right now.
Just plug your mic into on komplete audio 6 And the two outs on the keyboard.
In sonar preferences / Devces. Make sure you see that your inputs are checked.
Output to What? Headphones or speakers?
EDIT: I just looked and you only have 4 inputs... all the same is still cool just ignore the 5 and 6 inputs.
On a Sonar audio track you want one input for vocals. Look for an For input box and click on it.
Select what will most likely look like your interface name with something like Left 1 , Right 1 Stereo 1, Left 3 , Right 3 Stereo 3 Left 5 , Right 5 Stereo 5
This is how it looks. What it means in relationship to your interface Left 1 = [Input 1 ] Right 1 = [input 2] Stereo = [input L1& R2] to the same Sonar track, Left 3 = [input 4] Right 3 = [input 4] Stereo 3 = [input L3 & R4] to the same Sonar track Left 5 = [input 5] Right 5 = [input 6] Stereo 5= [input L5& R6] to the same Sonar track.\
So if you have the mic plugged into your komplete audio 6 on input 1 then you want to have the input on the track set to [Left 1]
You want to remain consistent so plug your keyboard into your interface inputs on 3 and 4. You can then set one Sonar track for stereo 3. OR you can set up two tracks one for each stereo channel of the keyboard to get to a track that is left 3 and one track for Right 3.....
That will get you going...
Just see if this works out for you first to get you going.
Hay look, Somethings are not locked in stone... lol 3/18/2019
|
musaed
Max Output Level: -90 dBFS
- Total Posts : 50
- Joined: 2015/06/03 19:02:46
- Status: offline
Re: how to record multiple tracks at once in sonar?
2017/10/19 02:20:35
(permalink)
11Dreams
For now you just need to understand how to hook your stuff up. The mixer is not important right now.
Just plug your mic into on komplete audio 6 And the two outs on the keyboard.
In sonar preferences / Devces. Make sure you see that your inputs are checked.
Output to What? Headphones or speakers?
EDIT: I just looked and you only have 4 inputs... all the same is still cool just ignore the 5 and 6 inputs.
On a Sonar audio track you want one input for vocals. Look for an For input box and click on it.
Select what will most likely look like your interface name with something like Left 1 , Right 1 Stereo 1, Left 3 , Right 3 Stereo 3 Left 5 , Right 5 Stereo 5
This is how it looks. What it means in relationship to your interface Left 1 = [Input 1 ] Right 1 = [input 2] Stereo = [input L1& R2] to the same Sonar track, Left 3 = [input 4] Right 3 = [input 4] Stereo 3 = [input L3 & R4] to the same Sonar track Left 5 = [input 5] Right 5 = [input 6] Stereo 5= [input L5& R6] to the same Sonar track.\
So if you have the mic plugged into your komplete audio 6 on input 1 then you want to have the input on the track set to [Left 1]
You want to remain consistent so plug your keyboard into your interface inputs on 3 and 4. You can then set one Sonar track for stereo 3. OR you can set up two tracks one for each stereo channel of the keyboard to get to a track that is left 3 and one track for Right 3.....
That will get you going...
Just see if this works out for you first to get you going.
thanks i try audio 6 inside sonar and i add a reverb in real time time there no latency. But my mic and my piano keyboard the sound is too low. i try to add a boost volume level plugin in sonar. I turn it all the way up. Now there hes sound
|