viziovizio
Max Output Level: -89 dBFS
- Total Posts : 76
- Joined: 9/22/2012
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
June 06, 13 4:49 PM
(permalink)
windows 6.08 driver does indeed work with two delta cards into pci slots. they sync just fine in win 7 64 bit sp1 using asio drivers. when i use wdm it's nothing but static on my i5 asus. i ve tried and tried with wdm. asio 6.08 works great and a FAN on the breakout boxes works great to get rid of the metal reverb sounds that i was having. good luck
|
viziovizio
Max Output Level: -89 dBFS
- Total Posts : 76
- Joined: 9/22/2012
- Status: offline
are your delta 1010 boxes warm to the touch?
June 06, 13 4:49 PM
(permalink)
 ?
|
dan le
Max Output Level: -85 dBFS
- Total Posts : 252
- Joined: 5/2/2004
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
June 07, 13 2:56 AM
(permalink)
Hi Vizio, I am so sorry that I did not get back to this forum for 2 days now.
No I don't have any heat problem.
When you start having heat issue, it is always the bad caps in the power supply section that caused that.
Like I said before, replace them with Nichicon caps, and you will be OK.
Running AC is so much more expensive.
I have provided you with a link of the inside of the 1010. Please take a look at it.
Hi PJH, that statement from the M-Audio guy is totally bs. It was on the Delta forum a long time ago, and since then so many people have come on the forum and refuted that fact. Including myself.
Let me say again that I have ran 3 1010s since 2003, with XP and then now with Win 7 64 bit, under WDM.
Vizio, the nice thing about WDM is that you can leave at 128 samples, and druing mixing, to avoid CPU taxing, just move the latency bar towards the right and you are done. Did I also say that I have used all 3 1010s at 64 samples as well. But CPU taxing starts to happen, so I use 128 samples. But it is just for playing softsynth.
I never undestood why people are preferring ASIO over WDM. That is totally crazy.
I have tested ASIO and WDM so many times, and I can tell you that I cannot hear any differences.
And I do this for money, not just for fun like a lot of other people.
i think that WDM is much more tolerable, period.
Best
dan
|
PJH
Max Output Level: -79 dBFS
- Total Posts : 599
- Joined: 1/23/2007
- Location: South Africa
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
June 07, 13 8:33 AM
(permalink)
dan le
Hi Vizio, I am so sorry that I did not get back to this forum for 2 days now.
No I don't have any heat problem.
When you start having heat issue, it is always the bad caps in the power supply section that caused that.
Like I said before, replace them with Nichicon caps, and you will be OK.
Running AC is so much more expensive.
I have provided you with a link of the inside of the 1010. Please take a look at it.
Hi PJH, that statement from the M-Audio guy is totally bs. It was on the Delta forum a long time ago, and since then so many people have come on the forum and refuted that fact. Including myself.
Let me say again that I have ran 3 1010s since 2003, with XP and then now with Win 7 64 bit, under WDM.
Vizio, the nice thing about WDM is that you can leave at 128 samples, and druing mixing, to avoid CPU taxing, just move the latency bar towards the right and you are done. Did I also say that I have used all 3 1010s at 64 samples as well. But CPU taxing starts to happen, so I use 128 samples. But it is just for playing softsynth.
I never undestood why people are preferring ASIO over WDM. That is totally crazy.
I have tested ASIO and WDM so many times, and I can tell you that I cannot hear any differences.
And I do this for money, not just for fun like a lot of other people.
i think that WDM is much more tolerable, period.
Best
dan
Thanks for the info, Dan. Yes, the support from M Audio doesn't look like it's gonna get me anywhere. I am using WDM again and I also do not see or hear any difference between ASIO and WDM. Synch seems to be fine and stability is also pretty good. I'm not sure about the heat build up and it cannot apply to me as I'm running a Delta1010 and a Delta 1010LT. The 1010LT does not have a breakout box but that is the one that has the distortion on it. The 1010 with the breakout box is fine and has been for many years now. I'll keep you posted regarding the M Audio sypport though. Cheers.
|
Fog
Max Output Level: 0 dBFS
- Total Posts : 12302
- Joined: 2/27/2008
- Location: UK
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
June 07, 13 11:14 AM
(permalink)
the distortion, is it a gradual build up and sounds like the "bit crushing" type effect. I had that issue with their ozone drivers long ago, to a point they didn't fix it for ages / had to get another card by another maker.
you might want to look into what you are sharing IRQ wise as well. I have a 1010LT in a pc here, but haven't been making music using it to know how good the drivers are.
Davey, you can have a multi-card asio driver (it's normally for the same card *2 or same family/maker) .. the 1010 is one, it says in the manual.. and older card like the dsp factory/sw100xg also had the same thing... but obviously 1 card was the masterclock and the other was slaved to it.
|
PJH
Max Output Level: -79 dBFS
- Total Posts : 599
- Joined: 1/23/2007
- Location: South Africa
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
June 07, 13 11:40 AM
(permalink)
Fog
the distortion, is it a gradual build up and sounds like the "bit crushing" type effect. I had that issue with their ozone drivers long ago, to a point they didn't fix it for ages / had to get another card by another maker.
you might want to look into what you are sharing IRQ wise as well. I have a 1010LT in a pc here, but haven't been making music using it to know how good the drivers are.
Davey, you can have a multi-card asio driver (it's normally for the same card *2 or same family/maker) .. the 1010 is one, it says in the manual.. and older card like the dsp factory/sw100xg also had the same thing... but obviously 1 card was the masterclock and the other was slaved to it.
Yes Fog, That is exactly the problem I'm having. The track will start off clean and then slowly disintegrate into that "bit crushing" type of distortion. Cheers.
|
viziovizio
Max Output Level: -89 dBFS
- Total Posts : 76
- Joined: 9/22/2012
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
June 07, 13 6:52 PM
(permalink)
Re:looking for othe users of delta 1010 x 2(16 audio in) 15 hours ago (permalink)
Hi Vizio, I am so sorry that I did not get back to this forum for 2 days now.
No I don't have any heat problem.
When you start having heat issue, it is always the bad caps in the power supply section that caused that.
Like I said before, replace them with Nichicon caps, and you will be OK.
Running AC is so much more expensive.
I have provided you with a link of the inside of the 1010. Please take a look at it.
Hi PJH, that statement from the M-Audio guy is totally bs. It was on the Delta forum a long time ago, and since then so many people have come on the forum and refuted that fact. Including myself.
Let me say again that I have ran 3 1010s since 2003, with XP and then now with Win 7 64 bit, under WDM.
Vizio, the nice thing about WDM is that you can leave at 128 samples, and druing mixing, to avoid CPU taxing, just move the latency bar towards the right and you are done. Did I also say that I have used all 3 1010s at 64 samples as well. But CPU taxing starts to happen, so I use 128 samples. But it is just for playing softsynth.
I never undestood why people are preferring ASIO over WDM. That is totally crazy.
I have tested ASIO and WDM so many times, and I can tell you that I cannot hear any differences.
And I do this for money, not just for fun like a lot of other people.
i think that WDM is much more tolerable, period.
Best
dan
dan thankx for the help. question about wdm. is it possible to listen to what is being recorded in real time with wdm by just clicking the echo button on the track you are recording.(so the singer can hear himself singing over the recording?) didn't think that was possible unless you use asio, which is why i have stayed with asio for so long.
also 128 samples do you mean that you first click on the echo logo in the bottom right of the desktop set it to 96,000 and 128 samples. then after you open sonar x2a producer you click "p" and move the wdm task bar to the far right and slowly see how it records.... moving it in slow increments to the right a little bit after each recording test until you get it locked in? wdm seems to FLY, so i am hoping that you can direct monitor yourself while you record. with asio i send outputs 1 and 2 split to a head phone amp that gives everybody in the band different options in their cans as we record. hoping that wdm will also allow such direct monitoring by just clicking the "echo" button on the vocal track you want to hear in real time.(without a LONG delay)
or if this doesn't work i could record in asio and mix in wdm? great post guys. best problem solving questions and answers i ve ever done in here. can't thank you enough.
|
viziovizio
Max Output Level: -89 dBFS
- Total Posts : 76
- Joined: 9/22/2012
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
June 07, 13 8:33 PM
(permalink)
SPOKE TOO SOON....
i have played with these wdm drivers for 2 hours and i can not get a quick non delay like response out of the mic in real time like i can with asio. now that i think about it it is exaclty why i gave up on wdm,mme etc a long time ago. for all of asio faults, it's sure seems bette to me when singing over the band playing and being able to hear yourself in the cans in real time.... thoughts?
|
dan le
Max Output Level: -85 dBFS
- Total Posts : 252
- Joined: 5/2/2004
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
June 07, 13 8:52 PM
(permalink)
viziovizio
dan thankx for the help. question about wdm. is it possible to listen to what is being recorded in real time with wdm by just clicking the echo button on the track you are recording.(so the singer can hear himself singing over the recording?) didn't think that was possible unless you use asio, which is why i have stayed with asio for so long.
also 128 samples do you mean that you first click on the echo logo in the bottom right of the desktop set it to 96,000 and 128 samples. then after you open sonar x2a producer you click "p" and move the wdm task bar to the far right and slowly see how it records.... moving it in slow increments to the right a little bit after each recording test until you get it locked in? wdm seems to FLY, so i am hoping that you can direct monitor yourself while you record. with asio i send outputs 1 and 2 split to a head phone amp that gives everybody in the band different options in their cans as we record. hoping that wdm will also allow such direct monitoring by just clicking the "echo" button on the vocal track you want to hear in real time.(without a LONG delay)
or if this doesn't work i could record in asio and mix in wdm? great post guys. best problem solving questions and answers i ve ever done in here. can't thank you enough.
OK Vizio, try to understand this. You are recording and monitoring at the same time, and that is a fully round trip. You cannot have direct monitoring, especially when the 1010 does not have that. I use a console so the monitoring issue has not been a problem for me. What you and many other people here can do is before you dub a guitar track, or a vocal track is to bounce your whole project to 2 tracks, within Sonar. Copy that mix to a new project to do dubbing, with all attributes, so it copies the tempo and everything else too. You can now change in the Delta control panel, to 96K and 64 samples, yes as low as 64 samples with Win7 64 bit and Sonar X1 or X2 64 bit. You can turn on the echo button now, and there will still be some slight latency, but it is totally acceptable for the singer or whoever that you are recording. Most important is that, everytime you change anything in the Delta control panel, upon going in Sonar, under WDM, you need to rescan or recalibrate (or whatever the term is, I am outside of the studio right now) your sound card again. Then move the latency bar all the way to the left, to get the lowest latency. Since you only have now 1 stereo track of your music, and some vocals tracks, things should be real good for you. And by the way, when you are working with Sonar, do not play anything like youtube or mp3 prior to using Sonar at all. That will mess up your bit and sampling rates. If you do, then turn off the breakout box of the 1010, and then restart Sonar, and then turn the breakout box on again. I hope this help in some way. best dan
|
viziovizio
Max Output Level: -89 dBFS
- Total Posts : 76
- Joined: 9/22/2012
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
June 07, 13 11:14 PM
(permalink)
OK Vizio, try to understand this.
You are recording and monitoring at the same time, and that is a fully round trip. You cannot have direct monitoring, especially when the 1010 does not have that.
I use a console so the monitoring issue has not been a problem for me.
What you and many other people here can do is before you dub a guitar track, or a vocal track is to bounce your whole project to 2 tracks, within Sonar.
Copy that mix to a new project to do dubbing, with all attributes, so it copies the tempo and everything else too.
You can now change in the Delta control panel, to 96K and 64 samples, yes as low as 64 samples with Win7 64 bit and Sonar X1 or X2 64 bit.
You can turn on the echo button now, and there will still be some slight latency, but it is totally acceptable for the singer or whoever that you are recording.
Most important is that, everytime you change anything in the Delta control panel, upon going in Sonar, under WDM, you need to rescan or recalibrate (or whatever the term is, I am outside of the studio right now) your sound card again. Then move the latency bar all the way to the left, to get the lowest latency.
Since you only have now 1 stereo track of your music, and some vocals tracks, things should be real good for you.
And by the way, when you are working with Sonar, do not play anything like youtube or mp3 prior to using Sonar at all. That will mess up your bit and sampling rates. If you do, then turn off the breakout box of the 1010, and then restart Sonar, and then turn the breakout box on again.
I hope this help in some way.
best
dan
dan,
i am more than will to try this and i hope it works. but, the whole idea of me getting 16 tracks going at once is all for nothing if i am only using 10-12 tracks and dubbing the vox later. i don't want to dub much, i want to record the full band seperatly and i want everybody to be able to hear what the mix sounds like. this is why i purchased all this gear. not to record like i have a 4 track.... why is it that this set up is not capable of recording a full band at once? it's a 4 piece band with vox. i have a big studio so isolation is perfect. drums in the big room with guitars and bass playing through headphones and their real miced amps in 3 other rooms. the vocalist is outside the main room looking through the glass at the rest of the band. i get what you are saying about over dub, but really i want to record all at once the foundation. this keeps the energy and tone of the band as a whole LIVE sounding.(it's how i did the first album) i then go back and record over dubbed guitar and more vox(back grounds).i did it once, but now it's like trying to catch lightning in a bottle.lol
you mention that "I use a console so the monitoring issue has not been a problem for me." so could you show me how you accomplish this so that it is not a problem for me? by console i assume you mean a large out of the box mixing board.(i use a yamaha 32 track). do you just send aux out to preamp and then out to headphone amps so that the band is hearing the recording in real time? , and just forget about hearing the real recorded tracks? because if this is possible, it sounds like a perfect way for me to be able to use this set up? i really appreciate all the help. if you could just explain how you can get a singer to record in real time, hearing their self's and the rest of the band with VERY minimal latency i will be a happy man....
|
PJH
Max Output Level: -79 dBFS
- Total Posts : 599
- Joined: 1/23/2007
- Location: South Africa
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
June 13, 13 4:26 AM
(permalink)
Here is the official word from M Audio regarding the use of the Delta series cards in Windows 7.
"Multiple Delta cards are not supported on Windows 7 regardless of whether you use the card in ASIO or WDM modes.
There are no plans to add multi-card support for the Delta cards on Windows 7 as the Delta cards are a discontinued product.
If you need to use multiple Delta cards for your recordings the best option is to see if your system can run Windows XP."
Looks like it's time to look for another interface
|
dan le
Max Output Level: -85 dBFS
- Total Posts : 252
- Joined: 5/2/2004
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
June 14, 13 2:54 AM
(permalink)
PJH, or whoever you are, for the oomph times, I told you that a lot of users of 1010s have been able to work with more then one 1010 on their system.
Check it out yourself on the M-Audio Delta forum!
Why do keep beating this dead horse for?
Who do you work for anyway, or do you have a gripe with M-Audio, because, perhaps, they used to be part of Avid ProTools?
Come on, it does work.
I am using 3 of them, and I will take a picture in the next few days and post it so that everybody can see.
PJH and all others on this forum, especially those who have thousands of posts, have a sense of civil responsibility. A lot of people from all over the world are reading this forum, so please, just because you are well versed in the English language, that you can say these things that are not entirely true.
Do you guys realize that a lot of other people from other countries are reading this and they believe in it?
They think that "OK, these guys are from the US, and M-Audio is from the US, therefore it must be true".
Yes, some people are having problems with the Delta driver, and some people don't.
Those you don't, perhaps, they don't tweak their computers right!
Pleace.
Dan
|
PJH
Max Output Level: -79 dBFS
- Total Posts : 599
- Joined: 1/23/2007
- Location: South Africa
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
June 14, 13 4:39 AM
(permalink)
dan le
PJH, or whoever you are, for the oomph times, I told you that a lot of users of 1010s have been able to work with more then one 1010 on their system.
Check it out yourself on the M-Audio Delta forum!
Why do keep beating this dead horse for?
Who do you work for anyway, or do you have a gripe with M-Audio, because, perhaps, they used to be part of Avid ProTools?
Come on, it does work.
I am using 3 of them, and I will take a picture in the next few days and post it so that everybody can see.
PJH and all others on this forum, especially those who have thousands of posts, have a sense of civil responsibility. A lot of people from all over the world are reading this forum, so please, just because you are well versed in the English language, that you can say these things that are not entirely true.
Do you guys realize that a lot of other people from other countries are reading this and they believe in it?
They think that "OK, these guys are from the US, and M-Audio is from the US, therefore it must be true".
Yes, some people are having problems with the Delta driver, and some people don't.
Those you don't, perhaps, they don't tweak their computers right!
Pleace.
Dan
Ok. Firstly, who I work for or what I do has absolutely nothing to do with you. Secondly do not try and make accusations about whether I have problems with M Audio or not. That is none of your business. The cards work for you. That's great. However, it is NOT working for me and a number of other users too. I submitted a report to M Audio technical support about this (after reading about other users also experiencing exactly the same problem on the M Audio Forum.) I've attached M Audio's response purely for those users out there who might be thinking about purchasing these cards (as they still available in stores). They have stated that the card has been discontinued and they won't be providing support anymore. The bottom line is that they are NOT working for some people. Please don't patronise me by brushing me off and saying that I haven't setup my system properly. I also take offence that you are accusing me of being untruthful. The makers of the card are stating that it is not supported. Just because DAN LE has stated that the card works does that mean it works on every system, in every application? I think not. I fully realise that there are people reading this from all over the world and they need to know that this card might work but it also might NOT work. They can then make an informed choice. So, to sum up. Dan LE, you might not be the Delta M Audio guru you think you are. Yes, you have had success with running three cards and they work for you. I'm very happy for you. There are also many users out there who are having problems with these cards and some have given up on them and replaced them with something else. M Audio themselves have admitted that there are problems with Windows 7 and they won't be providing multiple soundcard support anymore. Flogging a dead horse? I don't think so.
|
Rski
Max Output Level: -88 dBFS
- Total Posts : 146
- Joined: 2/13/2004
- Location: Canada
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
June 14, 13 5:36 PM
(permalink)
Some years ago I helped a friend with entering the DAW way, installed one Delta 1010 card under windows XP, all was smooth. He added a second card and experience system shut down,
changed the power supply, improved tower cooling, 5 or 6 good years. After seven years, his computer crapped.
I suggested a new tower, win 7. With help from a gamer the system was up and running, however, with the two cards, the assignment between cards A or B mixed up. I went through the set up, all looked good at my place, but shortly that system quit. Because it was a build, he ranted with the retailer, no resolve.
He bought a cheap refurbished older win XP tower, the Delta cards work great with those towers, although they are older, replace every know and again.
I know the WDM drivers worked fine under XP but with that case different versions of win 7 was a crap shot, mostly mixing up assignments that really throw a 20 channel board for a loop.
Myself I ran an Audiophile 2496 for 11 years through a few towers, with win 7 no problem. But my only gripe with that card, was the occasional recording would exhibit what I called devils horns. The problem showed in two different towers, so I ditched that card.
|
dan le
Max Output Level: -85 dBFS
- Total Posts : 252
- Joined: 5/2/2004
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
June 15, 13 3:23 PM
(permalink)
Hi PJH, I did not mean to pick on you or anyone on this thread. Note that I end the post with Peace. All I am saying that it works for me, and for a lot of other people too. Do you remember BoneStone, the moderator for M-Audio, when M-Audio used to be M-Audio? He said that it worked for him too, under Win7 64 bit, but there were a lot of users who couldn't make it work. Too bad that we lost all those posts, since M-Audio was sold. My point is that since it works for me and a lot of other people, may be there is hope that if anyone tweaks their system, that it will work eventually. The point is it might work, and not black and white that it does not work. That's all. You might try to re-install the M-Audio driver, by: 1. uninstalling the driver with the card(s) present in your system. 2. then after it is uninstalled, turn the computer off, and remove the card(s). 3. power the computer up again with no 1010 PCI card(s) installed. This forces your computer to recognize that there is no more 1010 driver. 4. power the computer down again, and install the card(s). 5. finally, power it up now and and install the driver, since Win7 senses that there is new device(s) present. Now you truly have a clean reinstall of the M-Audio driver. Btw, this is from M-Audio and not from me, so that PJH does tell me that I am pretending the M-Audio guru again.  Anyway, to PJH, Vizio and everyone who has the need for more than 1 cards, that you guys are serious about making good music, since you need all that inputs and outputs. Peace to all on this thread. dan ps: Again be sure to turn off in BIOS: . Core Turbo Boost. . C1E . PME . HPET if you have on these things with Intel core. I am with AMD.
post edited by dan le - June 15, 13 3:39 PM
|
mario
Max Output Level: -88 dBFS
- Total Posts : 140
- Joined: 11/6/2003
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
June 15, 13 5:45 PM
(permalink)
HI,
Since I've some issue I'll share this one quick.
I had been running a delta 1010 with WDM drivers flawlessly with windows XP and Sonar 7 and then 8.0 and 8.5a; never had a single problem with noise, click, dropout and all other sort of garbage.
I assembled a brand new PC using W7 64bit, still using 8.5a; it worked "flawlessly. with WDM drivers; not a single problem.....and then came X1.
Same hw, same OS, but a brand new X1.....BUUUUG! Something changed between 8.5a and X1 and I can no longer use my 1010 with any (old, latest) WDM driver without getting clicks and other popcorn noises randomly. Moving the ASIO solvedthe problem.
The finger was quickly pointed at Avid's drivers but I never and I will never buy into it but I have to live with even if it is an aggravation.
The end
|
viziovizio
Max Output Level: -89 dBFS
- Total Posts : 76
- Joined: 9/22/2012
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
June 16, 13 9:03 AM
(permalink)
man i can't believe all the drama this thread has started... sorry bout that guys. i just had some questions , didn't mean to start a holy war...lol latest update from my computer is starting to see more and more that this is a intermittent problem. this weeks problem is this......
i am running 16 mics into a snake(that works perfectly) - into my Yamaha mg32/14fx dual efx mixer(32-channel, 14 bus)
- into 2 delta 1010 breakout boxes - channel 1/2 out of top box into channel 23 - that goes out into bx8 and bx5 speakers that are split with a stereo junction box i made to toggle between big and small near field speakers.
this week i got a intermittent spike in track 5 . the fader light on the mixing board both out-board and sonar had some interference on it. i am watching these lights go up and down and thinking of you guys telling me the cans are bad in the delta 1010s.(which might be) so i shut down the system and blow air cleaner into all pots that have to do with #5 track and power up and it ran great.
but the way it's been acting, i can't even be sure if it was dusty pots. like i said before if you restart the computer sometimes the ghost problems go away. sometimes i have to restart 3 or 4 times, but the problem is just not a constant controlled group.
one day it's great, the next it's not. restart computer, goes away. it's just not stable. once i get the money i am going to pay someone to replace the cans in these things just to know. when i do i will report back.
OH AND PEACE....
|
g_randybrown
Max Output Level: -40 dBFS
- Total Posts : 3522
- Joined: 12/24/2003
- Location: Las Cruces, NM, USA
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
June 16, 13 10:32 AM
(permalink)
I didn't read the whole thread but the different driver versions I would think could be eliminated as a possibility by uninstalling and then deleting any registry keys that may still be there (current user/software/M-Audio/Delta) and then reinstalling the 6.08 drivers...just a thought
G. Randy Brown Windows 10, 64 bit, PlatinumIntel Core i7-3770S Asus P8Z77-V LK mobo 4X8GB Corsair XMS3 memory 500 GB Crucial BX100 SSD (OS)two WD Black 1 TB HDDSAPPHIRE DUAL-X 100314-4L Radeon HD 6970 2GB 256-Bit GDDR5 Presonus AudioBox 22VSLyoutube.com/crystalclearnm
|
Boss.savage
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 1/31/2014
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
January 31, 14 8:30 AM
(permalink)
robert_e_bone
Hi - I am trying to assist another forum member, and is having similar problems.
He also has 2 Delta 1010 PCI interfaces. One has the full breakout box, and the other one is I believe a 1010LT, or something like that.
That thread is:
This is still unresolved, but you might as well join in the fun.
Bob Bone
It's my understanding that all M-Audio cards will give you an intermittent glitch when they are synced. Best to use one card it seems.
|
Boss.savage
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 1/31/2014
- Status: offline
Re: looking for othe users of delta 1010 x 2(16 audio in)
January 31, 14 8:39 AM
(permalink)
viziovizio
getting metal tank sounding distortion. if reboot seem to go away sometimes after the reboot. i remember some time ago trying out older version of the driver just to make sure that i had the best one.( new does not always mean best ) i am using win 7 - 64 bit - sp 1 . so i uninstalled 510 5078 driver(so i thought) and reinstalled each card running 6.08 driver.(the one for service pack 1)
the ABOUT screen on the delta driver says 6.08.
but in the device manager / sound video game controllers / delta 1010 / driver / driver version (says) 5.10.0.5078
, which i believe is the older version. correct? why does the device manager say 5.10 5078 when the 6.08 driver is said to be
up and running? is it possible that this mix up is causing slight distortion sometimes unless reboot? thankx, mike
I had some horrors with my Delta 1010 set up. I found a card on line and solved all my problems. Your card may be fried!
Also, try cleaning up your break out box. I tore mine apart, sprayed every input/output and each of the buttons next the 1/4" inputs/outputs with DeoxIT® D-Series. You can find it at Radio Shack or your local electronics parts store.. You'll have to work the buttons as long as you can stand it (10-20 times each). I used a 1/4 inch jack to plug in and out of the I/O's.
Now my sound is pristine!
using asus i-5 , 8 gig , win 7 - 64 bit, sp1 , sonar x2a , 2(delta 1010s)
|
Boss.savage
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 1/31/2014
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
January 31, 14 8:46 AM
(permalink)
PJH
viziovizio
have been running 2 of these for years. 16 channels of audio records for well over an hour with out any trouble. all band practices are recorded this way. had some of the newer usb2 devices(line 6 ux8) my i 5 hated to use usb 2 or 3. lots of conflict. but pci works great. but every once in a while i get a slight (metal tank) sounding distortion. almost reverb like but NOT reverb.
to answer your question one of these cards works great. two of these cards work great. it's just that every once in a while i have to reboot thing that i am trying to figure out. the only thing i see is tha there is a discrepency in the sound card drivers and how they are worded. as posted above.
I've been running these two cards for years as well with no problems whatsoever. I'm only now starting to pick up this "metal" like distotion.
I'm now trying to use WDM drivers to see if that will make a difference.
Have you tried these drivers?
Cheers,
Peter.
Perhaps you can assist me. I cannot seem to get X3 set up correctly with My Triton keyboard and Delta 1010. I cannot get MIDI to play back the sounds on the keyboard. I think I've mapped all the I/O's correctly and turned on the echo on the MIDI track, yet I get nothing. I Also cannot get the keyboard to start when X3 is the midi clock and Korg is EXT. Any ideas?
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 8/13/2004
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:looking for othe users of delta 1010 x 2(16 audio in)
February 02, 14 2:44 AM
(permalink)
This thread is from the middle of last year. Perhaps it might be worth starting a new thread.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|