I got the v window to work and it recognizes my computer. I could see sonar and work with  sonar in the v window view on the IPAD which is awesome.     

But the faders don't work  or anything in V-control   

It's weird. Why can it see sonar in the v window and I can use it that way ..... But not the faders or anything else. 

I've been trouble shooting this for a few weeks now. 

The v control is reconized and checked in midi devices in and outs.   


Any suggestions ?

Mooch,
 
Check out this link from the Neyrinck forums...
 
http://forum.neyrinck.com/viewtopic.php?f=74&t=102&sid=cfe5dbb686b48e3c32fd30aa3a403b7f
 
Hopefully this will get you working. I don't have the details worked out as yet, but I was able to get Start/Stop Controls and Master Fade working.

KenB123


Mooch,
 
Check out this link from the Neyrinck forums...
 
http://forum.neyrinck.com/viewtopic.php?f=74&t=102&sid=cfe5dbb686b48e3c32fd30aa3a403b7f
 
Hopefully this will get you working. I don't have the details worked out as yet, but I was able to get Start/Stop Controls and Master Fade working.

Thanks Ken. 


I've been to that page. I have everything linked as in the picture in the link you provided. Still nothing. Just the V Window only -- no faders


thanks for your help though ... your my only response -    

Did you select the arrows in the lower left corner of V-Control? You can select banks and move through the tracks. And customize the settings in the controller settings? You have Bonjuor running also I assume?

Once I got everything in place, it is running great. You should see the LED's and faders should work on individual channels.

KenB123


Did you select the arrows in the lower left corner of V-Control? You can select banks and move through the tracks. And customize the settings in the controller settings? You have Bonjuor running also I assume?

Once I got everything in place, it is running great. You should see the LED's and faders should work on individual channels.

hey there - thanks again 


yes bonjour is running - I have the Ac 7 core for ipad running and bonjour installed




it's strange - the v window shows sonar and I cAn conrol sonar 


the ipad is showing that it is connected to my pc 


now get this -- this is the part I dont understand - 


I have sonar in Mackie mode - ins and out to the v-controller - but in the the control bar screen it just says "mackie controller" connecting ...  but it never does 

I dont know what else to do 

That is odd. I will review my setup tomorrow and if I see anything you did not cover, I will let you know. Seems like everything is in place.

ok -- thanks Ken  - I appreciate it

Mooch - you are not alone.

This has been driving me crazy for the past 2 months, ever since I bought it. My iPad can't even see the PC

My Mackie Controller is set up (as is everything else, including Firewall, router etc) as per the Neyrinck site and even after leaving it for over 30 minutes, it never connected.

AC7 working perfectly here also.

Good luck, at least you're halfway there......

Cheers,
Jerry