Ah....I thought I had x-ray vision when I got those new Da-Vinci tuners...now I'm convinced.
In case anybody is wondering how I'm going to wire those pups...
Before glueing the top on I routered channels from the bridge>pup>cavity and Npup to cavity.
Knowing the type of pups before glueing the top on is a good thing.
Another set neck issue ....because I wasn't going to use a Humbucker then a tenon
on the neck would have needed to be done before the top was on and then the top has
to fit around the the neck that's already attached to the body.
I didn't want to have to deal with all that. It's much easier if there is going to be a Humbucker because the fretboard ends at the pup so the body top is just routered away as it's not seen anyway.
By not using a tenon I could keep the neck off and route the neck pocket with the top on.
Hope that makes sense.