For support, I assume you would want to contact Roland as the Integra, Fantom, and V-Studio are all Roland products.

John
Noldipro how do you have things setup How are your hardware synths connected?

Hu, That's fast... thank you
[- V-700-C and V-700-R are connected by the connection cable]
USB:
- Integra-7 and the V-700-R (with integrated Fantom) are both USB-connected to PC (2 separate USB cables connected to two USB-Ports [2.0])
Midi:
- Roland RD-700-NX (Midi Out 1) -> V-700-R (Midi In)
- Roland RD-700-NX (Midi Out 2) -> Integra-7 (Midi In)
(had tried also 
- Roland RD-700-NX (Midi Out 1) -> V-700-R (Midi In)
- V-700-R (Midi Out) -> Integra-7 (Midi In)
 
(if I was stupid, you may disconnect my head bone from my neck bone ;-)
[With this Setup In Sonar preferences -> Audio Driver Settings Integra-7 cannot be activated as audio driver (checkbox is inactiv), only by disabling all the other audio drivers in SONAR I can (or could) activate Integra-7 as audio driver]
 
Thank you..
 

noldipro
Hi everybody
 
I humbly admit:
 
After
- having connected my V-700 set-Sonar X3e-Integra7-hardware correctly with my PC Win 8.1, 64-bit)
- having installed all the most recent drivers and editor softwares
- having gone step-by-step through the more or less outdated (?) manuals in the packages
- having had a lot of fun and creative moments made over the past 18 months with all the well working parts (Audio Recording, Lounge Lizard, Addictive Drums Dimension Pro, Rapture, audio recording and so on)
 
I still have (greenhorn-?) trouble to have my Fantom and Integra-7 work (be it no sound / midi signal on the Integra-7 synthesizer track or Fantom-sound only with direct mix).
 
- Knowing that this is not a plug-and-play-system 
- hesitating to contact support (which one? Cakewalk or Roland?) but
- seeing that some other more experienced users are fighting with the same problems
I would like to ask:
 
Are there any recent helpful threads, tutorials or manuals for the proper Fantom / Integra-7 integration into the most recent system Environment or shall I contact support directly? I can't find them..
Always thankful for the helpful posts of all bronce, silver, platinum and diamond members...
 
noldipro

My situation is a little different. For about 2 years, I have been using the Integra-7, and other synths with Sonar X with no problems. I believe the issues I mentioned started when I installed an Integra-7 editor. It is supposed to allow me to edit the parameters of the I-7 right from within Sonar. It never did work (no communication) and it has messed up my setting files. I think I am going to have to reload Sonar to fix it...
Walt
 

Anderton
For support, I assume you would want to contact Roland as the Integra, Fantom, and V-Studio are all Roland products.

Thank you. If I get any generally useful information from Roland concerning integration in SONAR X3e I'll post it in this forum. In the meanwhile I thank for eventual hints.