• SONAR
  • update on my issue's with sonar pencil tool
2013/02/14 23:25:43
DigitalBoston
this must be somthing iv broken or something
http://youtu.be/pq8qFmKQELY
 vidio of a clip from a freind rapin as sonar crahsed when penil was used on the vocal buss
 but seems to haapen on every buss and master
 win 7 64 sonar x2 delta 1010 ASAO buffer 64 driver 5 10 0 5074  crutial SSD raid 1 and a 2T WD
 asus 990fx AMD 6870 no third party noncence for gaming just music software
input 2.4. 107
output 2.1 92
RT 4.5 199
playback at 256
playback I/0)512
 record I/O512
ADBDepth 24
any thought on how i can get better stability im open for.
thanks to all who care.and love PC music
2013/02/15 01:46:56
chuckebaby

link is not working
 
  To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame.
This content cannot be displayed in a frame


2013/02/15 11:07:16
Bristol_Jonesey
What are you trying to automate?
2013/02/15 11:13:45
DigitalBoston
the vocal master. its not like i always do this. i just though i was moving faster for a quick mix. but every time i touch anything in busses with pencil it frezzes up
as you can see when i drag a line across , , i have to restart sonar as it wont even let me kill the song
 even contol alt deleat wont get me back it has to be a restart..??
 specs?
2013/02/15 11:58:33
sharke
I find that a lot of stuff makes Sonar crash if you do it during playback. Clicking around in the console, opening stuff, drawing automation etc. One of the most annoying things for me at the minute is Sonar crashing if I select a clip and shift-L for looping during playback. Crashes 50% of the time. 
2013/02/15 12:04:06
DigitalBoston
is there some reason like drive trans rates, buffer or bit setting that sonar needs tweeked.
 i dont want to trash cake it seems folks here have better luck and have some ideas of what it could be?like a whats everyone using record and playback specs?/that would help me eliminate those isssues first
2013/02/15 13:57:37
Bristol_Jonesey
posted twice 

2013/02/15 13:59:17
Bristol_Jonesey
Bristol_Jonesey


Personally, I wouldn't use the Pencil tool for that.

You'd be much better off automating the volume via the bus fader itself

Just write click the fader & select Automation Write Enable. Play your project back and adjust the fader in real time.

You'll have much finer control using the fader - better still - map it to a real fader or knob on your controller, if you have one.

Don't forget to switch Write Enable OFF when you've finished 

Another good reason for mapping to a real controller is you should be using your ears, not your eyes, grab the fader and close your eyes while you're writing the envelope.
You can always go back in and edit your moves manually when you've finished




12
© 2026 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Use My Social Media Account