Beagle
Mesh - most flatscreen monitors should have VESA Display Mounting Standard available on the back of it. 
 
if that one has VESA DMS, it should be able to use these:
http://www.amazon.com/s?ie=UTF8&page=1&rh=i%3Aaps%2Ck%3AVesa%20Mount%20Stand

You know, I'm really not sure.....(I wasn't even aware of VESA DMS). I'll definitely check this once I get home......however, I found this pic online. From the little search I did, the replacement stand/base looks like the one below.
 
 

mesh - in your picture, there are 4 holes in the back of the case with "SAMSUNG" in the middle of those 4 holes.
 
those 4 holes are the VESA standard mount.  any VESA standard mount will attach there.

In the picture, those holes around the logo on the back are where the vesa mount is. 

Beagle
mesh - in your picture, there are 4 holes in the back of the case with "SAMSUNG" in the middle of those 4 holes.
 
those 4 holes are the VESA standard mount.  any VESA standard mount will attach there.

Excellent!!
So something like this should work? http://www.amazon.com/MonMount-Single-Monitor-VESA-Stand/dp/B00801CRIO/ref=sr_1_1?ie=UTF8&qid=undefined&sr=8-1&keywords=VESA+single+desk+base

yes, that should work.
 
notice the stand you linked to has 8 mounting holes.  the VESA standard for larger TV's uses the larger spaced 4 holes and the VESA standard for smaller TV's and computer monitors use the smaller spaced 4 holes.

drewfx1
In the picture, those holes around the logo on the back are where the vesa mount is. 

Aha.....I see it now......I was thinking how's that going to work on the bottom......Thanks Drew!!
Thanks Beags!!
I'm glad I asked you guys before trying to get the exact replacement part.

FYI, drilling holes in a lizard is frowned upon in some communities. You need permits for that sort of thing.
 
HTH

UbiquitousBubba
FYI, grilling lizards with becan should be first drowned in becan fat for full community support. You'll never need any permits for that sort of thing.
 
HTH

Becanized!!

According to the specs here: http://downloadcenter.samsung.com/content/UM/200910/20091023093805125/BN59-00910G-00Eng.pdf
 
the monitor has 75 mm x 75 mm spaced mounting screws which would make it a VESA MIS-D, 75, C mount.
 
But a box is cheaper.

slartabartfast
According to the specs here: http://downloadcenter.samsung.com/content/UM/200910/20091023093805125/BN59-00910G-00Eng.pdf
 
the monitor has 75 mm x 75 mm spaced mounting screws which would make it a VESA MIS-D, 75, C mount.
 
But a box is cheaper.

Is that (VESA MIS-D, 75, C mount) for a wall mount?
 
I looked through the manual as well, but didn't see where it said anything about MIS-D, 75, C, Mount......I only saw this: "P2370HD: This product complies with 75 mm x 75 mm (2.95 x 2.95 inches) VESA specifications."
 
I'm just curious on how you got to that specific part? (no offense meant.....I do highly respect your knowledge in all of these things :)).......I also could've easily missed seeing it as well.