By any chance, would there be a speaker icon for an MTM design? Thanks.

I will take a new set of measurements tomorrow, then go through all the options to see if there is one.
You can't change it after you have saved it (The icon) with your measurements. AFAIK

Not that I know of, but you can post that on the IK forums as a feature request.

Thanks guys.

 I  got in on this over the weekend. The deal was a good one with the jampoints. I had been looking for a simulated monitoring system. This alone is worth the price IMO. The ability to immediately go to M/S and hear the side and then listen in Mono. The different selections available like car stereo which really does sound like my mix in my car,boom box. TV speaker etc. All very helpful.

 Re taking the measurements for ARC 2 was pretty painless. The most notable difference was that the corrections are more accurate compared to ARC 1. My curves never went flat on ARC 1. In ARC 2 the curves are spot on. Take your time and make the measurements correctly and the rest is easy. FWIW my cpu is taking a bigger hit but not enough to rock the boat.I do notice a difference though.

 Great job IK!

Thanks for the kind words! The simulated monitoring is by far my favorite feature too. I travel and being able to check my mixes so easily is sweet.

Obi, I seem to have a problem. 

I have taken 16 new measurements, but when I select the corrrection on and off with the new measurements I hear no difference even though there is significant differences in the curves. If I use the legacy measurements everything works as expected.

I have uninstalled and reinstalled and tried on different projects. 

Any thoughts?

Thanks in advance.

Finally got around to using the new version and definitely an improvement!
Tighter bass and apparently better stereo separation.
(My kick drum is dead on centered now)
 

One question though, I'm 99.9% sure that I know what the "80's white" in the virtual list represents but what does the "90's black" represent?
 
What black monitor was popular in the 90's?

edit

There should be an audible difference between the two. Please contact our Support so we can help you out.

STinGA


Obi, I seem to have a problem. 

I have taken 16 new measurements, but when I select the corrrection on and off with the new measurements I hear no difference even though there is significant differences in the curves. If I use the legacy measurements everything works as expected.

I have uninstalled and reinstalled and tried on different projects. 

Any thoughts?

Thanks in advance.