SONAR

SONAR (p.3470)
Post New Thread
Regular
cloudhop

emt 140 reverb in Sonar...card?

I'm thinking of adding the EMT 140 plug in to process recorded audio clips only. Would I still need an accelerator card ? is it possible to use the plug in without an expensive accelerator ? I guess they may only be required for live recording? Sonar 7 producer..
3
2013/04/09 08:55:06
JimHoch

Channel(Track Bleed) when using Sends to Buses

I have a composition with 23 Tracks (audio) When I assign all percussion to Bus A, I can still hear some percussion when I have the Bus A fader All the way down. I would like to assign all non percussion tracks to Bus B and that way be able to control the mix between the Percussion audio and the ins..
3
2013/04/09 04:11:13
wmb

X2a and Clip Groups - Maybe I don't get it.

http://www.cakewalk.com/Documentation/default.aspx?Doc=SONAR%20X2&Lang=EN&Req=Arranging.22.html This page is describing things that don't happen for me. Specifically I am trying to create a group selected parts from 10 tracks of simultaneously recorded drums. The session has a few punch-ins ..
11
2013/04/09 04:09:33
M_Glenn_M

Trying to understand sends on busses

Just playing around, I found that turning on the various buss sends (vox, guitars, drums etc) and sending them to the Master (as well as outputting to Master) seems to crisp up the tracks. Further, "Sending" the Master to the sound card (as well as "outputting" to it of course) does the same thing. ..
9
2013/04/09 04:07:08
peterjung

Vocoder Output Very Low?

Hi there! I am messing around with the Vokko vocoder which is great fun but I have a problem. I can get the vocoder effect to sound pretty good on a vocal track but the output level is very low...like really quiet...way to quiet to compete in the mix. I have tried messing around with eveything I can..

2013/04/09 03:44:54
greenstrat

Inserting Cut At Specific Time Point

I generally zoom in real deep, and just use the scissors on the tools.. but I would like to just INSERT CUT AT say 17:01:000 I do this when I'm comping vocals.. for any super-nubes I insert cuts at a timeline convenient in/out (like 17:01:000 or 54:01:000 point before and after the wave form, this m..
2
2013/04/09 01:34:32
Shadowz

Project Compatibility Sonar X2 Producer trial and Sonar LE 8.5.2

I have been using Sonar Le 8.5.2 for a couple of years and thought I would down load the Sonar X2 trial. All good, but tried to run one of my LE projects to test it out and it is really distorted and crackly. Is this a compatibility issue. Is the earlier LE file just not supported by the new softwar..
6
2013/04/09 00:29:55
rodreb

Just installed X2a : Quick impressions / questions (So far)

Just installed X2a Producer yesterday (I'm a long time Sonar user and had been reluctant to give up my Sonar Producer 8.3!) . Haven't had time to get into it really deep yet but, so far....... First off, In the past, I have always bought Sonar as physical media (CD's / DVD's), this is the first time..
10
2013/04/09 00:01:09
brconflict

Using MIDI

I must say, that using MIDI from the Piano Roll view is quite good in Sonar. Thanks to the SWA videos I got what I needed to get running, and find that adding a string section to a song was quite easy. I'm not a MIDI fan, and I still believe MIDI is way overdue for an overhaul to make it simpler to ..
10
2013/04/08 23:07:40
Muzock

Latency in one projet only

I don't what I have touch, but as son as I hit record, it start. Thénars I Check IF thé latence Is Still there. I go back in the preferencies and Côme back and thé latency Is gonelle. I play on the keaboard and it's fine. Then I hit record and everything start all overdose again. I read everything (..
4
2013/04/08 20:01:05

<< ..3469 3470 3471 ..

© 2026 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account