Cakewalk Hardware

Cakewalk Hardware (p.25)
Post New Thread
Regular
DerrickBenoit

VS700 Fantom Synth Midi Warning in X3e

So far I've had no response from Cakewalk support. After installing X3e Producer 64 bit, I'm getting the "Midi devices are not set up properly" warning again. The Fantom Editor comes up with the proper patches for the project, but plays only true piano sounds. It is necessary to open the set up Midi..
1
2015/12/13 04:58:41
louisodwyer

Upgrading the VS-700C and VS-700R to run on Windows 10

I've seen other posts about this, so here’s my story... I bought the 700C and 700R about 5-6 years ago, running on Win7 32-bit (I had latency issues back then with 64-bit), very happy with it, it’s the centre-piece of my music room (I’m not a professional). So, time to upgrade an keep the system..
2
2015/12/07 01:51:35
bugsunplugged

What New Hardware & Audio Interface? Fire Wire vs. USB? Solicitation for Advice...

It's been 11 years since I've posted here, I was a little surprised to discover. Other things have kept me occupied, I guess. Long story shortened: I've decided I want to stick w/ Win10 and tombstone the old DAW (described in my signature if I did that part correctly). The plan is to upgrade to Sona..
2
2015/12/06 09:09:22
pplat

Network helper driver

I upgraded to windows 10 and now I can't open the REAC panel. Error says "Network helper driver not installed on this system or failed to load" I reinstalled (reac_drv_v20), still won't open...
2
2015/12/05 11:21:35
tomesson

Sonar Platinum and V Studio 700 on Macbook Pro

Hi everyone,Pretty new to the forum, but I've dug out so much great info from all the posts that I'd thought I would share my recent experience getting my V Studio 700 running on my late-2011 Macbook Pro. I was a Cakewalk/Sonar guy for years, back to the DOS days, but ending up going with a Macbook ..
1
2015/12/03 03:08:58
Mydemise

ARX midi port error but im not using ARX(not even in midi devices)

I am not sure what I did when installing some dmxis software but this error keeps popping up during Sonar 8.5 startup. It says... ARX MIDI Port Error - "Cannot open ARX MIDI ports. Please ensure ARX is connected and that the MIDI ports are not selected in the host." I have never used ARX and it is n..
9
2015/11/28 21:46:28
Geo524

FA66 Drivers?

Will the drivers for my FA66 be updated to work with Windows 10? Thanks..
9
2015/11/28 15:19:43
micv

A500Pro ownwers, can you help

Just got a A500Pro. I look up the firmware version (ACT+B1) and it shows "ver.1200". Is that more recent than 1.15? why using a different numbering scheme?Also Editor can't receive data from the hardware, it would hung at "transmitting...", transmit to the hardware is ok...
4
2015/11/27 16:58:40
starfield

Rapture Session / ZETA 2.2 kills VS-700 ASIO driver

Hi Craig, Bakers & VS-700 community, Rapture Session or ZETA 2.2 kills the VS-700 ASIO driver - not being any longer available/usable on the PC.Did anyone else run into the same issue?@Craig/Bakers : Will there be a fix (hotfix)? Could anyone pls take a look and find out what happens here? Thank..
2
2015/11/26 07:13:23
bluesteelmonkey

Headphone Output tascam 20x20

Hardware: http://forum.cakewalk.com/fb.ashx?m=3320458..

2015/11/23 15:03:44

<< ..25 26 27 ..

© 2024 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account