Hardware

Hardware (p.193)
Post New Thread
Regular
Desertdrone

Yamaha o1x users Please :)

Hi all Right now I'm currently using Sonar 8.5 producer as my main writing daw, but I also use Presonus Studio one producer.Currently still using a 32bit pc a dell t3400 workstation I'm thinking about adding a yamaha o1x i saw in the forums that somewone was using 2 of them with sonar 8. My current ..
1
2014/10/21 12:23:10
mettelus

15VDC Phantom Power? (Yamaha EMX mixers)

I replaced my outboard mixer with a Yamaha EMX 212/312/512 series a few months ago and remember this striking me as odd but forgot to ask until today. The phantom power is only 15VDC which sticks out since I would expect 48VDC. Does anyone have insight into why it is only 15VDC? I have yet to plug a..
4
2014/10/17 02:21:50
Soundblend

Using hardware EQ / USB Audio interface, Wiring ?

Hi i borrowed a Behringer Tube Ultra Q T1951, hardware EQ, from someone i know Well i have never used hardware before Now i will use sonar and re track audio.... through this hardware EQ. Using my line's L / R out, on the Audio Interface (Steinberg Ci1 ), and in to the Hardware EQ input's 1 a..
5
2014/10/16 10:57:52
tomixornot

Lower cost multi channel interface

I'm looking for a lower cost interface mainly for live recording, where direct monitoring low latency doesn't really matter. Was waiting for the Behringer U-Phoria UMC 1820 to match with the ADA8200 combo, for a total of 16 channels input, which cost a total of a little below USD 400/=. However to d..
3
2014/10/16 00:55:38
woodsglen

help with ins file for yamaha mox

I guess the subject line says it all.... I'm new here, you'd think there would be a big resource in ins files over the years.Thanks for any help or "advise". WG..
1
2014/10/14 21:23:40
jbow

If I use a USB 3.0 port...

Do I need to buy a USB 3.0 cable, or are they the same? Thanks,J..
10
2014/10/13 14:41:54
fireberd

SOLVED** Korg NanoKontrol connected but not detected by programs in Win 7

I have posted this on the Windows 7 forum, but I'm also posting it here. Here is the link to the post on the Win 7 forum, which also has screen shots.http://www.sevenforums.com/hardware-devices/348305-korg-nanokontrol-connected-but-not-seen-applications.html#post2905273 Unit worked a couple of month..
11
2014/10/10 17:10:05
ampfixer

LA2A

Using one of these in a software environment is great compared to an actual rack unit. I have one that a friend wanted me to work on. It's actually a "Red Stripe" clone of an LA2A that I'm retro fitting with vintage UTC transformers. The clone isn't a dead knock off and the original, vintage, transf..
6
2014/10/09 14:23:52
g_randybrown

Anyone using an M-Audio Axiom 61?

Suddenly my pitch bend wheel only bends about a 1/4 tone.I checked the manual to see how to adjust it but can't find specifically how to do so....there's only a reference in the appendix.I googled the issue but all of the M-Audio forums that discussed it seem to have been removed.I then looked for a..
10
2014/10/09 06:38:16
Skyline_UK

Haswell DAW - anyone taken the plunge?

I see Scan systems (here in the UK) are offering Haswell-based DAWs now. I'm not a computer techy so I was wondering if anyone has taken the plunge and can tell me about any issues/pitfalls - real or potential? Thanks. John..
12
2014/10/07 20:30:54

<< ..193 194 195 ..

© 2026 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account