Hardware

Hardware (p.260)
Post New Thread
Regular
Shambler

spdif to analogue converter

Can anyone recommend an spdif to analogue converter, I want to use the spdif o/p on my Roland QuadCapture to send an analogue signal to the mic in on my V-Synth GT for the vocoder...
17
2013/01/11 15:42:49
michaelhanson

Focusrite Scarlett

I have been eye balling the Focusrite Scarlett series for a while now; thinking about getting the 8i6 or 18i6. I have been using a M-Audio Firewire Solo for a long time now and I am thinking about making the change to USB. Seems like firewire is kind of on its way out. Anybody have anything good or ..
3
2013/01/10 21:14:00
Bonzos Ghost

BabyFace - S/PDIF to Toslink (ADAT optical) input adapter

I'm close to pulling the trigger on a DAW upgrade and will most likely be adding a BabyFace. The Babyface only has optical for the digital I/O, which also doubles as the S/PDIF I/O. I know there's a couple of adapters out there which provide conversion of both input and output. ($100 - $150 range) I..
2
2013/01/10 15:30:55
Genghis

Using BCR2000 With ACT in SONAR X2a

I just picked up a Behringer BCR2000 and am trying to get it working properly with SONAR X2a and ACT. I followed a similar procedure to the steps outlined for configuring a BCF2000 in this article: http://www.soundonsound.com/sos/may07/articles/sonarworkshop_0507.htm Naturally I selected the BCR cus..
1
2013/01/10 14:23:36
jm24

ADAT I/O to computer: least expensive interface????

ADAT I/O to computer: least expensive interface???? Been using a EMU 1820m for years. analog I/O 8 channels MIDI I/O 2 in 2 out ADAT I/O 8 in 8 out I use the ADAT to connect a mixer. The EMU appears to work fine now with win 8 64 and X2, and 8.5.3, even though the drivers are 2 years old. But it doe..
11
2013/01/09 02:41:24
Chappel

Alesis QX49 keyboard controller configuration

Anyone have experience setting up the Alesis QX49? I have it setup, basically, but not sure how to assign the sliders and knobs to any tracks I select. I can't get it to control any other tracks but the first 8. If you own the device you know how pathetically inadequate the manual (quick start guide..

2013/01/08 22:06:11
keneds

External effect

I recently purchased a TC Helicon voiceworks effects rack. I have it Hooked up via a s/pdif connection. Two s/pdif cables, in/out out/in. How do I get X2 to recognize the unit so I can use it as an external effect. I do have the ability to track through it. But I haven't figured out how to add the e..
8
2013/01/08 14:19:57
gbarrett

Need to get 32 analog channels into X2

I'm being contracted to design a simple, efficient and affordable system for a local church. They currently have a 48 channel splitter snake and some Presonus Digimax FS modules that someone had used at some point, but they don't have any interfaces to get lightpipe into a computer. In the past, I'v..
7
2013/01/07 05:20:41
gat19g

What would you get for a control surface?

I have been using sonar for about 2 1/2 years. Now that i have been using a daw for that long I am noticing more and more how I would like to have real knobs, faders, and drum pads to work with instead of just a mouse. I already have an old Yamaha keyboard that is plugged into sonar via midi/usb. Ho..
12
2013/01/07 05:16:55
M_Glenn_M

GR20 pickup dying?

Today the low E and the A string show no signal to the GR20 I wiggled the cables but no joy. The pup is a GK-3 I sprayed tuner control clean and lube to no change. All I can think of is- are the pickups dying? Can that happen with the individual PUPs? (one for each string) It started with one strin..
4
2013/01/06 12:52:55

<< ..259 260 261 ..

© 2026 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account