Techniques

Techniques (p.185)
Post New Thread
Regular
amiller

Bitflipper - IS DA MAN!!!

“I have to send out a BIG thank you to Bitflipper. He suggested monitoring with a set of headphones to remove the control room as a variable in determining where the heck my midrange had gone. Well, I did and here's what I found and did. First, as soon as I monitored a reference track through the he..
5
2012/05/25 09:00:38
trimph1

uuummmmmm....what is proper mic placement when it comes to drums anyways?

I'm just pondering this right now. I have a rather basic kind of drumset now, and, of course, have been mucking around with the mics, such as I have here, and am thinking more in terms of getting this thing mic'ed up...what does one need to properly mic a drum kit up? And what positioning is used wh..
9
2012/05/24 16:20:29
hockeyjx

What to use instead of Corning 703???

Any suggestions?..
22
2012/05/24 12:26:49
joshcamp

how to create a bit/sample breakdown effect ?

i want to create the effect of a reverbed wash breaking down granularly (like a bit/sample rate breakdown- for lack of better description). any ideas on how to achieve this effect in sonar x1 ? to be clear: i have a part that is a big reverb wash with a long tail. i want it to breakup granularly (al..
8
2012/05/24 11:00:18
amiller

Control room acoustics problem

I'm very sure that most of the issues I'm having gettting a good distorted guitar tone recorded have more to do with my control room acoustics than anything else. In my efforts to get a good recording I decided to try to emulate the tone of one of my favorites...Andy Timmons. I imported one of my fa..
7
2012/05/23 15:49:04
trimph1

Well, I Got What Loudness/Dynamics Involves...Now What About Arrangements?

Now, having figured out, roughly, what the above terms mean, I'm on to the next conundrum, for me. I've been perusing some articles on Soundonsound about arranging and have basically come to realize that I do really need to understand what arranging actually is and how it works in my pieces...you se..
6
2012/05/22 23:03:36
TysonC

Brand new Mic is a hissing mess! How can I fix it?

Hey, guys. I went to town today and bought a new mic and it's got all kinds of hiss and white noise (throughout all the frequencies, low end and high). It's nearly impossible to dial out! The mic itself is a Samson Q7 plugged into my computer via a USB cable called the Sony LightSnake. I bought both..
15
2012/05/22 22:07:31
trimph1

OK...Can One Have Loudness And Dynamics Together?

And how does one achieve this so that it works in all set ups? Or rather, should it work in all set ups? I'm a conflixxed puppy here......
25
2012/05/22 20:56:33
mtgonzalez

Using outboard equipment for mixing and mastering

what are some ways you can send the stereo bus or a stereo track in Sonar to a piece of outboard equipment (compressor) for mixing or mastering purposes then back into the Sonar project?..
12
2012/05/22 20:03:32
Michael C.

Recording from Sonar to Sonar

I now use a Steinberg MR816x audio interface. I used to use an M-Audio Delta 66 (yes, it was ancient), and I used to be able to play tracks in Sonar and record them at the same time to a new audio track in Sonar. There were many reasons why I liked to do this. I have been trying everything to get my..
3
2012/05/21 13:23:08

<< ..184 185 186 ..

© 2025 APG vNext Commercial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account