pc build opinions

Author
Typhusftw
Max Output Level: -90 dBFS
  • Total Posts : 1
  • Joined: 2011/10/18 12:47:02
  • Status: offline
2011/10/18 13:46:49 (permalink)

pc build opinions

I'm trying to build a pc for home studio use. I'm trying to stay within $900 and $1000, if possible. Here is what I have so far: Processor: http://www.tigerdirect.co...pNo=4777384&CatId=4074 MOBO: http://www.tigerdirect.co...pNo=5648696&CatId=4070 Video Card: http://www.tigerdirect.co...EdpNo=1075157&CatId=28 Hard Drive: http://www.tigerdirect.co...pNo=6076939&CatId=2459 RAM: http://www.tigerdirect.co...pNo=6044636&CatId=4533 Case?Power Supply: Haven't found one yet. Hoping you guys could help me find one that's not too expensive or loud. Is there anything that I should change/replace? This is my first build and I want to try and make sure I don't need to build another one for a while.
#1

6 Replies Related Threads

    Guitslinger
    Max Output Level: -70 dBFS
    • Total Posts : 1018
    • Joined: 2003/11/15 00:55:12
    • Location: USA
    • Status: offline
    Re:pc build opinions 2011/10/19 00:05:14 (permalink)
     If the machine is for dedicated audio work I would reconsider getting a graphics card with a fan, it just adds to the noise. You need a second hard drive for serious audio work.

    Intel I5-2500K
    ASUS P8P67Pro mb
    16gb Corsair Vengeance RAM
    ASUS EN210 silent GPU
    Hyper 212+ CPU fan
    Fractal Audio midtower case
    Corsair TX650 PSU
    ASUS blueray optical dr
    WD 500gb SATA hard drive x 2
    Windows 7 Professional
    Focusrite Saffire Pro 40
    #2
    Bristol_Jonesey
    Max Output Level: 0 dBFS
    • Total Posts : 16775
    • Joined: 2007/10/08 15:41:17
    • Location: Bristol, UK
    • Status: offline
    Re:pc build opinions 2011/10/19 04:18:17 (permalink)
    I agree with Guitslinger.

    1. A fanless Graphics card
    2. A 2nd HDD for all your Cakewalk projects
    3. A 3rd HDD if you plan on using massive sample libraries
    You will also need:

    1. A case
    2. PSU
    3. An optical drive
    4. Software
    You haven't mentioned a mouse/keyboard/monitor(s) so I'm guessing you're covered there.

    Consider mounting all of your internal disk drives into some sort of silent drive enclosure. These guys are pretty good, both for drive enclosures and cases.

    Antec make a superb range of PSU's. Before you order one, add up the total power consumption of each individual component and make sure you buy a unit that can comfortably handle the load. Or just get a 1000W model.

    Lastly - backups. You MUST be able to do regular backups. Consider getting a 2TB External drive (or you can get an ordinary HDD and mount it in a special external drive enclosure)

    CbB, Platinum, 64 bit throughout
    Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
    #3
    Truckermusic
    Max Output Level: -56 dBFS
    • Total Posts : 1924
    • Joined: 2005/07/22 10:34:16
    • Location: Riverview, Florida
    • Status: offline
    Re:pc build opinions 2011/10/20 09:37:27 (permalink)
    Well I built my first computer last August..... I had a lot of help from the people here on this board so my advice would be to take them seriously..... Here are my suggestions for you: I used the 2600K i7 Quad Core.....Now I am happy with it but.....BUT if I was to redo it again I would of used the i5 version..... VERY VERY close to the same specs....you will get very close (so close you will not be able to tell the difference) to the same performance....same OC ability....all for almost $100 cheaper.... Case after months of thought and research ..... NZXT Phantom...I did black but I see the white is $119.00 at Tiger Direct.... I love this case...lots of HD storage and great air flow, fairly low price, quiet, easy to work in and excellent access to front panel ports..... the only draw backs for me were 1. no USB 3.0 front usb port 2. wiring the fans take a little thinking thru to hook up.....but NOT impossible... 3. I would suggest order an extra front panel fan and maybe an extra top fan....to do this use the NZXT fans...they are non standard...but they are reasonably priced and quiet so not a big expense.....but they are dead easy to install.... 4. case manual sucks! but again if you follow your component instructions and watch some you tube videos this is an easy hurddle to jump.... 5. The HD's take a little effort to get in.....I was not able to install the the way the manual said....so I just screwed them in.....no biggie Hard Drives: Get at least two.....Three is better Samsung HD103SJ Spinpoint F3 Hard Drive - 1TB, 7200RPM, 32MB, SATA-3G $60.....I got 5 of them installed in this case......Love them! Tiger direct CPU Fan: Notchua or Zalman......and no need to break the bank.....under $60 and it will provide much needed cooling.... these would be some of my suggestions that I used and am very happy with...... Clifford Sorry about the long paragraph.....I edited this three times to try to make it more readable but each time I saved it ....it would roll right back into this long paragraph......I give up.......this has been happening more and more to me......Sorry.....
    post edited by Truckermusic - 2011/10/20 15:58:11

    http://www.soundclick.com/cliffordamundsen 
    NZXT Phantom Case (in Black)
    Windows 7, Service Pack 1, 64 Bit OP
    Sonar X3 Producer, 64 Bit 
    Asus P8P67 Pro Rev.3 MoBo
    16 Gig of Ram 
    4.5 Gighz
    Intel i-7 2600k Quad Core Sandy Bridge
    Unibrain Firewire Card
    Edirol FA-101 Firewire interface
    Mackie Big Knob
    NI Komplete 8
    Machine 2
    #4
    Guitarhacker
    Max Output Level: 0 dBFS
    • Total Posts : 24398
    • Joined: 2007/12/07 12:51:18
    • Location: NC
    • Status: offline
    Re:pc build opinions 2011/10/20 15:19:41 (permalink)
    I also built a computer last August based on the i5 chip .... everything cost about $850 or so. I did not need a mouse, keyboard, or monitor so having those parts kept it at that price. 

    I installed 2 hard drives, one for OS and software and the other, much larger drive is a storage drive for library samples and projects. 

    case, video card, power supply, MOBO, chips, memory, everything to get it working including the OS software.

    My website & music: www.herbhartley.com

    MC4/5/6/X1e.c, on a Custom DAW   
    Focusrite Firewire Saffire Interface


    BMI/NSAI

    "Just as the blade chooses the warrior, so too, the song chooses the writer 
    #5
    Beagle
    Max Output Level: 0 dBFS
    • Total Posts : 50621
    • Joined: 2006/03/29 11:03:12
    • Location: Fort Worth, TX
    • Status: offline
    Re:pc build opinions 2011/10/20 19:59:41 (permalink)
     Sorry about the long paragraph.....I edited this three times to try to make it more readable but each time I saved it ....it would roll right back into this long paragraph......I give up.......this has been happening more and more to me......Sorry.....


    You're using a current version of Firefox.  this is a known issue with the forum software not being compatible with the last couple of versions of FF.

    http://soundcloud.com/beaglesound/sets/featured-songs-1
    i7, 16G DDR3, Win10x64, MOTU Ultralite Hybrid MK3
    Yamaha MOXF6, Hammond XK3c, other stuff.
    #6
    Truckermusic
    Max Output Level: -56 dBFS
    • Total Posts : 1924
    • Joined: 2005/07/22 10:34:16
    • Location: Riverview, Florida
    • Status: offline
    Re:pc build opinions 2011/10/21 10:36:44 (permalink)
    Beagle I did not know this........I just thought that I was not doing something correctly......you know old operator error rearing his ugly head again.... so now I feel better..... thanks Clifford

    http://www.soundclick.com/cliffordamundsen 
    NZXT Phantom Case (in Black)
    Windows 7, Service Pack 1, 64 Bit OP
    Sonar X3 Producer, 64 Bit 
    Asus P8P67 Pro Rev.3 MoBo
    16 Gig of Ram 
    4.5 Gighz
    Intel i-7 2600k Quad Core Sandy Bridge
    Unibrain Firewire Card
    Edirol FA-101 Firewire interface
    Mackie Big Knob
    NI Komplete 8
    Machine 2
    #7
    Jump to:
    © 2025 APG vNext Commercial Version 5.1