RE: [opinion] Cascade M20u Large Diap Conden & AT at2020 (diamondjim)

Wed, 23 May 2007 15:39:54 GMT

If you are referring to bayviewproaudio I have had good luck with them. I ordered a Presonus CS and got a free pair of SDC mics, M-37's which so far have worked very well as drum oh's.

I also have a Cascade Victor ribbon (< $200) which is a sweet mic for acoustic bass and guitar. So far I am impressed with the Cascade mic products.

RE: [opinion] Cascade M20u Large Diap Conden & AT at2020 (wogg)

Mon, 21 May 2007 09:22:11 GMT

I have a couple M20's and find them quite decent as well. I've never had the opportunity to compare them directly though.

RE: [opinion] Cascade M20u Large Diap Conden & AT at2020 (IzovAge)

Sat, 19 May 2007 20:28:15 GMT

I can't speak about the Cascade but the at2020 is very usable for it's price.

[opinion] Cascade M20u Large Diap Conden & AT at2020 (xxtraloud)

Sat, 19 May 2007 13:55:43 GMT

your opinion on this? I am getting a firepod and there is a store that gives this included in the price. what do you guys think?

here are the specs http://www.cascademicrophones.com/cascade_m20u.html

*
Capsule: New 1.07â€/28 mm 5Âµ edge connected, gold vapor-diaphragm
*
Construction: heavy duty machined brass with anodized finish
*
Polar Pattern: cardioid
*
Operating voltage: +48V Phantom Power
*
Electronics: New low-noise class A discrete Fet+Bi-Polar, transformer-coupled
*
Frequency range: 20 Hz to 20 kHz
*
Sensitivity: -38.5 dB (0 dB=1V/Pa)
*
Equivalent noise level: (A-Weighted per IEC 286-4) <15 dB
*
Maximum SPL for THD: <0.5% (1 kHz) 140 dB w/Pad
*
Switchable low frequency cut-off: -6 dB @ 100 Hz
*
Switchable pad: -10 dB
*
New improved suspension shockmount
*
Connector: 3-Pin male XLR
*
Weight: 525 grams/1.16 lbs.
*
Dimensions: 47x215 mm / 2x8.6â€

the at2020

http://www.audio-technica.com/cms/wired_mics/a0933a662b5ed0e2/index.html

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
OPEN CIRCUIT SENSITIVITY â€“37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 144 dB SPL, 1 kHz at 1% T.H.D.
NOISE 20 dB SPL
DYNAMIC RANGE (typical) 124 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 2 mA typical
WEIGHT 12.1 oz (345 g)
DIMENSIONS 6.38" (162.0 mm) long,
2.05" (52.0 mm) maximum body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
AUDIO-TECHNICA CASE STYLE R7

which one it's better? I think they are in the same price range.

thanks!