jackasspenguin
Bronze Member
- Total Posts : 121
- Reward points : 0
- Joined:
- Status: offline
Crash Report! Deleting Automation Nodes will do the trick
I've managed to find a bug. This probably isn't the best place to mention this but, I have things I can be doing like reloading Sonar every time I delete automation nodes. It's happened to me 4 or 5 times now. Try it! Record some automation and then delete the nodes and see if it ever crashes on you. I don't know if this is common. I thought I'd mention it and see if it can be addressed as it's giving me fits.
Windows 7 64 Bit Gateway LX6810 C2Q Quad 8GB Ram MOTU 896mk3 Axiom 61 Sonar X2 NI Komplete 8 Omnisphere Reason 6.5 Z3ta+ 2.1 Sylenth1
|
mudgel
Platinum Member
- Total Posts : 6755
- Reward points : 0
- Joined:
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:Crash Report! Deleting Automation Nodes will do the trick
(permalink)
Have you submitted a bug report. We can't do much here except to confirm or deny that it happens to us as per your description.
BTW it doesn't happen with my setup
Mike V.
SONAR X2a (x64) running on
STUDIO Rack Mount Win7x64
ASUS P9X79 PRO
INTEL i7 E3930k
UAD 2 Quad
32GIG DDR3 18000
JBL2300 system LOCATION HP DV8 18.4"
Presonus studio Live 24.4.2
i7-720 8GIG DDR3 nVidia GT230M 2 X 500GIG SATA3 HDD
WIN7x64
|
jackasspenguin
Bronze Member
- Total Posts : 121
- Reward points : 0
- Joined:
- Status: offline
Re:Crash Report! Deleting Automation Nodes will do the trick
(permalink)
Well, I guess I did when the program crashed. If I need to send the report through other channels please tell me where I need to send it. Thanks!
Windows 7 64 Bit Gateway LX6810 C2Q Quad 8GB Ram MOTU 896mk3 Axiom 61 Sonar X2 NI Komplete 8 Omnisphere Reason 6.5 Z3ta+ 2.1 Sylenth1
|
Danny Danzi
Gold Member
- Total Posts : 4248
- Reward points : 0
- Joined:
- Location: DanziLand, NJ
- Status: offline
Re:Crash Report! Deleting Automation Nodes will do the trick
(permalink)
Working for me as well without a crash.
-Danny
|
Bristol_Jonesey
Platinum Member
- Total Posts : 10893
- Reward points : 0
- Joined:
- Location: Bristol, UK
- Status: offline
Re:Crash Report! Deleting Automation Nodes will do the trick
(permalink)
I must have deleted many hundreds of automation nodes since X1d and so far not a single crash.
i7 3930, 32Gb RAM, 3 x 1Tb Internal, 3Tb External HDD's, Win 7 64 Bit, Saffire Pro 26, Saffire 6 USB, ISA One, Adam P11A, Pod Pro XT, Behringer Bass V-Amp, AT4033, Sm58's, Sm57's, SE R1 Ribbons,
Sonar X2a, BFD2, EWQLSO Platinum Plus, T-Racks Singles, Various guitars/phones/keyboards
|
FastBikerBoy
Platinum Member
- Total Posts : 9307
- Reward points : 0
- Joined:
- Location: Watton, Norfolk, UK
- Status: offline
Re:Crash Report! Deleting Automation Nodes will do the trick
(permalink)
Project specific maybe? I delete nodes by the hundreds throughout a project's life and it isn't happening here. I tend to lasso select, perhaps selection method is a factor, how are you selecting?
|
John T
Gold Member
- Total Posts : 4853
- Reward points : 0
- Joined:
- Status: offline
Re:Crash Report! Deleting Automation Nodes will do the trick
(permalink)
Or perhaps plug-in specific, even? What is the automation assigned to?
Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 7 64 bit // Sonar Producer X2a (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
bobguitkillerleft
Silver Member
- Total Posts : 744
- Reward points : 0
- Joined:
- Location: Adelaide Australia
- Status: offline
Re:Crash Report! Deleting Automation Nodes will do the trick
(permalink)
The small amount Iv'e done,no probs.
http://soundcloud.com/rks26Silencio550/i7 2600k@4.6GHz GA-Z68XP-UD3[rev.1]/16GB/2x1TB SG.Barracuda/dell XPS L502x Lap/X2 Producer/VS-100 UA25EX/P&M V.I.P/NomadPulseTech/Waves TTT/L3LL Maserati/Mus.2/CLAComp's/PowerPack/ProAudioDSP DSM V2/Ampli3/G.R.5proVC2A,VC76,VC160/EZ/BFD2/SSD4 Platinum/Gibson L/H LP Studio/IbanezRS135gen.FloydRoseJB+OBL/84 Marshall 2203 4x25w Greenbacks
|
gcolbert
Silver Member
- Total Posts : 523
- Reward points : 0
- Joined:
- Location: Windsor Mill, MD
- Status: offline
Re:Crash Report! Deleting Automation Nodes will do the trick
(permalink)
My experience with things in Sonar crashing when using drag-and-drop have almost always come back to problems with my video driver. You might want to check your video driver to see if there is a newer driver.
|
Geo524
Bronze Member
- Total Posts : 128
- Reward points : 0
- Joined:
- Status: offline
Re:Crash Report! Deleting Automation Nodes will do the trick
(permalink)
No problems here and I'm forever deleting nodes.
Win 7 Pro x 64; Sonar X2a Producer; AMD Phenom II X4 BE, 3.7 GHz; DDR3 16 GB Ram; MSI 785GM-E51 MB; Cakewalk FA66; 2 x 1TB and 1 x 640 GB HDD; Mackie HR624 Monitors, KRK G2 Rockit 5's, Dual HP Monitors
Music and SFX http://www.audiosparx.com/georgeandmarguerite
|