here you go - 32 AND 64 bit versions :)

Adrian

http://www66.zippyshare.com/v/7614939/file.html

Awww...guess I came a bit too late for the BCR2000 x64 update as the zippyshare link is dead now. Adrian, would you be so kind as to re-share somehow please?

http://www66.zippyshare.com/v/88522945/file.html

bon apetit :)

I will send new link in about 24 hours. Now I'm in my office, afer my workday I go stright to one club to get the party started. 
So don't expect new download links before saturday midday CET.

not 24 but 48 hours, but here you are :)
A.J. bcr-2000 cONTROL sURFACE - IN 32 AND 64BIT VERSIONS.

http://www.sendspace.com/file/dyxy6r

It's six months later and there seems to be no mention of BCR2000s on SourceForge any more. Is AJ's BCR2000 plugin still available / being developed?

I'd be very very grateful if someone could post me a link to a download to the 64 bit version.  I'm running X1 on W7 64 bit having finally given up on XP.  I was sticking with it because I have (had) an 01X (and Yamaha in their wisdom have abandoned their customers and decided not to update their drivers) but the firewire interface is just too unreliable because of shared interrupts used by other hardware.  I'd rather run three monitors but I miss a hands-on control surface and my BCR2000 is just gathering dust.

is this file or any update still available?

Hey wicked... I did some video tutorials on Sonar use of the BCF2000 on my website.  Does anything there help you at all?  The video is in pre-x version (I think I had 8.5 at the time) and since the X versions, the prochannel control didn't end up getting used and it killed some of the BCF EQ functions in Mackie mode.  Still useful, though a bit less-so.  It's really a shame that there is no support for the prochannel stuff here and that the EQ bits stopped working, but as I understand it, this is more of a Mackie protocol issue than a BCF problem.
 
What exactly are you wishing that it would do that it doesn't?
 
Anyone know what has become of the somewhat-recently-open-sourced Mackie stuff for non-developers?

"everyone can make it work for own CS" - sure, maybe, but what about USERS that just want their stuff to work that doesn't?  I don't know C++ and don't really want to in order to get a BFC2000 to work with Sonar, which it should have done to begin with! :)  Especially since it used to work and has been broken with no regard!
Pfffttt...

AzSlow - I did not pay for my site design - I built it.  I do web hosting as part of my day business (a small part) and I host on that platform - so at some level I pay for that myself.  Yes, I built my own site and I have the ads and popup because I'd appreciate donation for the time I put in for the specific reason that I created videos to help people use their Cakewalk software.  The reason I put the videos up there was for the community and I have honestly made next to nothing from that site.  In fact, I only relatively recently put the pop up donation request on there in hopes of making enough to get Sonar X3 - which I bought after getting the funds in other ways.  I really have made about $5.00 on the drum map video - and maybe $25 over the last several years from any other donations.  I have not even made enough on the ads to get a google payout - so "whatever".  These sorts of videos should really be provided by the software or hardware maker, but they weren't, so I created them.  Even in the case of the BCF2000, I created the videos for others who use these controllers who wanted to get a better use from them within Sonar specifically.  I would be happy for Cakewalk or Behringer to be interested in using these videos, really for a minimal fee (like one of those new Behringer devices or whatever - for as many units as my video might have helped them sell).  I actually did a similar thing for the graphics software that I use and they happily gave me a copy of the software for a few tutorial videos that I created for them :).
 
Really, I'm not asking anyone from the community to create these for free, and I really DON'T think it's Behringer's responsibility either, because they put in the Mackie compatibility so that they would work with multiple vendors' software, depending on that vendor's support of the Mackie library.  Sonar used to support the Mackie library more fully than they do now.  The EQ part was something that worked before and there is apparently nothing I can do to make it work again - this isn't just some "put your old EQ plugin back and it will work" because it was broken because of the removal of the default track EQ that used to be there that has been replaced by the EQ in the ProChannel, which doesn't allow the Mackie control to control it.  This didn't break because Behringer didn't supply support for it.  It broke because Sonar changed the way that the modules are referenced by the Mackie control system.  As I said above, this is not limited to the Behringer or any other specific device - it affects all devices that use the Mackie Emulation - including the Mackie units themselves. 

Blades AzSlow - I did not pay for my site design - I built it.

Sorry, I have overseen the About on the designer site
 
In fact, I think the fix will cost me less then an hour-two of work, the problem I do not own VC and I do not have anything to test the result. CW developers have both for sure and probably can do that even faster.
 
I am a bit more relaxed then at the morning, so you are right: why they just do not do this as a "gift" ? May be they have already fixed that for X4 and are going to use it as an addition argument for upgrade... But common, they are not so bad.

 Greetings all... this is my 1st post on this forum so please forgive me if I am breaking any rules or protocols by posting here.. I have been searching the net for the info i need for over a week but im still drawing blanks and at this point I'm desperate LOL! ok here goes..... I recently acquired a bcr2000 and I would like to use it to control my Korg TR-Rack.. Unfortunately I am a midi noob and have no idea how to approach this. I have looked at the midi implementation chart that came with the tr-rack but i don't see how i can get that information (.syx) to my BCR. would anyone be able to help me accomplish this?
 
Sidenote... I have installed BC Manager as I understand it is a helpful tool when configuring the BCR. I even went so far as reprogramming the encoders and buttons on the BCR.. Im still getting familiar with the process(es).. That being said I still have no idea how to get the syx data from my synth to dump to BC Manager and then to my BCR.. i see so many syx files on the net but none for my synth so i guess I have to do it myself. Thanks in advance for any help with this. It is greatly appreciated.. I apologize if my question seems noobish.