EricDeluxe
Max Output Level: -82 dBFS
- Total Posts : 428
- Joined: 1/18/2010
- Location: Sweden
- Status: offline
New feature wanted for Pro Channel - message to Cakewalk;)
Hello Firstly, I want to say that I totally love ProChannel and its effect, sounds great. However, sometimes it would be great to be a little more flexible. As I understand it, you can only set ProChannel in Pre or Post for the whole rack. I would love to see the possibility to arrange ProChannel and 3rd party VSTs in any order I want. Example: ProChannel EQ Fabfilter C - Compressor Fabfilter Volcano 2 ProChannel Tube Saturation PSP Vintage Warmer 2 Or am I wrong? Can you actually do as I wan't to already in an easy way (Similar to Logic) Thanks
http://soundcloud.com/ericdeluxe - my harder side https://soundcloud.com/cirque-du-sonique my softer side *************************************** Sonar Platinum, Windows 10 (64 bit), MOTU Ultralite MK3 Hybrid, Novation SL MKII 25, NI KORE 2, NI Maschine, NI Komplete 9, Yamaha HS50m, AKG K240S, AKG Perception 200, Z3TA 2+, Soundtoys Native Effects, PSP Mixpack 2, several VSTs****************************************
|
mattplaysguitar
Max Output Level: -55.5 dBFS
- Total Posts : 1992
- Joined: 1/2/2006
- Location: Gold Coast, Australia
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 5:02 AM
(permalink)
That sounds like a pretty reasonable request. A pretty annoying workaround would be to set it as Pre FX bin, use just the EQ, then add your 3rd party, then route it to a bus, and finish with your ProC saturation then PSP on your bus. It's a little messy, but should work!
|
ProjectM
Max Output Level: -36 dBFS
- Total Posts : 3941
- Joined: 2/10/2004
- Location: Norway
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 5:34 AM
(permalink)
This has been discussed a lot and a popular suggestion is a FX Bin module for the Pro Channel - which I really like the idea of. Send in a feature request. At the moment there's only Mattplaysguitar's suggestion that i know of.
(Sonar Platinum - Win10 x64) - iMac and 13" MacBook - Logic Pro X ++ - UA Apollo Twin DUO - NI Maschine MKII - NI Komplete Kontrol S61 - Novation Nocturne - KRK Rokit 6 SoundcloudNegative Vibe Records
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 1/25/2008
- Location: Watton, Norfolk, UK
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 5:45 AM
(permalink)
Here's a thread started a while ago to encourage users to feature request an PC insert point that would allow routing out to the FX channel and back again. I even typed out the FR text to copy & paste. Feel free to use it if that matches your idea. The more FRs there are for a feature the more likely it is to appear, so say CW....
|
EricDeluxe
Max Output Level: -82 dBFS
- Total Posts : 428
- Joined: 1/18/2010
- Location: Sweden
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 3:41 PM
(permalink)
Thanks for your input. Will send a suggestion to Cakewalk. Hopefully they listen:) FastBikerBoy Here's a thread started a while ago to encourage users to feature request an PC insert point that would allow routing out to the FX channel and back again. I even typed out the FR text to copy & paste. Feel free to use it if that matches your idea. The more FRs there are for a feature the more likely it is to appear, so say CW....
http://soundcloud.com/ericdeluxe - my harder side https://soundcloud.com/cirque-du-sonique my softer side *************************************** Sonar Platinum, Windows 10 (64 bit), MOTU Ultralite MK3 Hybrid, Novation SL MKII 25, NI KORE 2, NI Maschine, NI Komplete 9, Yamaha HS50m, AKG K240S, AKG Perception 200, Z3TA 2+, Soundtoys Native Effects, PSP Mixpack 2, several VSTs****************************************
|
EricDeluxe
Max Output Level: -82 dBFS
- Total Posts : 428
- Joined: 1/18/2010
- Location: Sweden
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 3:57 PM
(permalink)
http://soundcloud.com/ericdeluxe - my harder side https://soundcloud.com/cirque-du-sonique my softer side *************************************** Sonar Platinum, Windows 10 (64 bit), MOTU Ultralite MK3 Hybrid, Novation SL MKII 25, NI KORE 2, NI Maschine, NI Komplete 9, Yamaha HS50m, AKG K240S, AKG Perception 200, Z3TA 2+, Soundtoys Native Effects, PSP Mixpack 2, several VSTs****************************************
|
keith
Max Output Level: -36.5 dBFS
- Total Posts : 3882
- Joined: 12/10/2003
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 5:04 PM
(permalink)
IIRC, Noel himself chimed in on one of those threads... basically, they've heard the request for interoperability (whatever that means to FX bin & PC), and they'll be cooking something up at some point. That being said, it also sounded like a non-trivial bit of engineering involved, so...
|
Rasure
Max Output Level: -79 dBFS
- Total Posts : 584
- Joined: 2/6/2007
- Location: UK
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 5:18 PM
(permalink)
Here, Here! I put a request in for this a while back. Would make x1 perfect then. Would like to see v-vocal improvements too :-)
|
EricDeluxe
Max Output Level: -82 dBFS
- Total Posts : 428
- Joined: 1/18/2010
- Location: Sweden
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 5:56 PM
(permalink)
+ 1, need improvements. Don't use V-Vocal at all. I go with Melodyny 4 now. Would love to see an integration of Melodyne as in Studio One;) Rasure Here, Here! I put a request in for this a while back. Would make x1 perfect then. Would like to see v-vocal improvements too :-)
http://soundcloud.com/ericdeluxe - my harder side https://soundcloud.com/cirque-du-sonique my softer side *************************************** Sonar Platinum, Windows 10 (64 bit), MOTU Ultralite MK3 Hybrid, Novation SL MKII 25, NI KORE 2, NI Maschine, NI Komplete 9, Yamaha HS50m, AKG K240S, AKG Perception 200, Z3TA 2+, Soundtoys Native Effects, PSP Mixpack 2, several VSTs****************************************
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 11/25/2006
- Location: Thousand Oaks, CA
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 5:58 PM
(permalink)
Rasure Here, Here! I put a request in for this a while back. Would make x1 perfect then. Would like to see v-vocal improvements too :-) ErikDeluxe + 1, need improvements. Don't use V-Vocal at all. I go with Melodyny 4 now. Would love to see an integration of Melodyne as in Studio One;) Rasure Here, Here! I put a request in for this a while back. Would make x1 perfect then. Would like to see v-vocal improvements too :-) Uh oh. Here we go. This is where everyone piles on what they want.... and gets away from the OP (even the OP'er hisownbadself)
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 11/25/2006
- Location: Thousand Oaks, CA
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 6:00 PM
(permalink)
BTW, I want folders in folders and true MIDI solo when a drum map is employed and full X1 color control and a colored markers (or timeline).
|
Rasure
Max Output Level: -79 dBFS
- Total Posts : 584
- Joined: 2/6/2007
- Location: UK
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 21, 12 6:11 PM
(permalink)
lol sorry, bad habit! :-) Flexible plug-in routing is a must!
|
keith
Max Output Level: -36.5 dBFS
- Total Posts : 3882
- Joined: 12/10/2003
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 22, 12 7:38 PM
(permalink)
I want a peanut butter & fluff sandwich.
|
Tom Riggs
Max Output Level: -57.5 dBFS
- Total Posts : 1752
- Joined: 11/8/2003
- Location: Displaced Kansan living in Philippines
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 22, 12 9:26 PM
(permalink)
IIRC Cake mentioned that there was a possibility of some PC modules being made available as VST's. If enough of them are then we get the flexibility everyone is asking for.... Then Cake does not have to figure out how to route in and out of the PC back to the FX bin which IMHO over complicates the solution. Just my opinion. Carry on.
i7-3770k OC at 4.5Ghz, asus p8z77-m, 16g g.skill aries 1600 c9 ram, Noctua d-14 cooler, RME HDSPe Raydat, Motu FastLane, Nvidea GTX 980 ti 6G, windows 7 and 8.1 pro x64. Sonar Platinum and x3e currently installed My Music My YouTube
|
Zo
Max Output Level: -25 dBFS
- Total Posts : 5036
- Joined: 1/25/2008
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 22, 12 9:47 PM
(permalink)
before that , just a "real" fx bin woulb be appreciated !! i mean more than those stupid 3 fx seen at the same time on the consol view , fx slots as well as send slot is A MUST , not an option !!! ala PT , nuendo , Cubase ...Ect better VU ( nuendo switchable view from big vu , waves forms ect ....is excellent), monitoring solution , "real multi dock" , not one dock only (this will allow several consoles in one screenset) ...ect ...
For sale (PM me) : transfert ilok includedEventide Ultrachannel make offersSoftube Summit EQIK Neve 1081 , Neve precision Comp/LimEastWest GoshtwriterSoundforge Pro 12
|
Bub
Max Output Level: -3.5 dBFS
- Total Posts : 7196
- Joined: 10/25/2010
- Location: Sneaking up behind you!
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 22, 12 10:18 PM
(permalink)
ErikDeluxe ... sometimes it would be great to be a little more flexible. ... I would love to see the possibility to arrange ProChannel and 3rd party VSTs in any order I want. That would be great. What we need is the ability to put the Pro Channel modules in the FX Bin where they belong, instead of in a proprietary hidden bus environment that alienates 3rd party VST's. That has to be some kind of record doesn't it Bapu?
"I pulled the head off Elvis, filled Fred up to his pelvis, yaba daba do, the King is gone, and so are you."
|
Zo
Max Output Level: -25 dBFS
- Total Posts : 5036
- Joined: 1/25/2008
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 22, 12 11:32 PM
(permalink)
bud you already can for the softube knob ;)
For sale (PM me) : transfert ilok includedEventide Ultrachannel make offersSoftube Summit EQIK Neve 1081 , Neve precision Comp/LimEastWest GoshtwriterSoundforge Pro 12
|
carlosagm79
Max Output Level: -84 dBFS
- Total Posts : 301
- Joined: 2/7/2011
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 23, 12 0:34 PM
(permalink)
ProChannel EQ Fabfilter C - Compressor Fabfilter Volcano 2 ProChannel Tube Saturation PSP Vintage Warmer 2 ErikDeluxe Hello Firstly, I want to say that I totally love ProChannel and its effect, sounds great. However, sometimes it would be great to be a little more flexible. As I understand it, you can only set ProChannel in Pre or Post for the whole rack. I would love to see the possibility to arrange ProChannel and 3rd party VSTs in any order I want. Example: ProChannel EQ Fabfilter C - Compressor Fabfilter Volcano 2 ProChannel Tube Saturation PSP Vintage Warmer 2 Or am I wrong? Can you actually do as I wan't to already in an easy way (Similar to Logic) Thanks Your request is more than OK, but, why on earth you need that many EQ/filters, compressors ans saturation processors in the same chain????its not kind of redundant?
|
EricDeluxe
Max Output Level: -82 dBFS
- Total Posts : 428
- Joined: 1/18/2010
- Location: Sweden
- Status: offline
Re:New feature wanted for Pro Channel - message to Cakewalk;)
May 23, 12 5:34 AM
(permalink)
Well, maybe this example was a little extreme, but I just wanted to explain my point:) However, sometime you may need EQ more than once. I sometimes use the Vintage Warmer to "tighten the channel" better in the whole mix. carlosagm79 ProChannel EQ Fabfilter C - Compressor Fabfilter Volcano 2 ProChannel Tube Saturation PSP Vintage Warmer 2 ErikDeluxe Hello Firstly, I want to say that I totally love ProChannel and its effect, sounds great. However, sometimes it would be great to be a little more flexible. As I understand it, you can only set ProChannel in Pre or Post for the whole rack. I would love to see the possibility to arrange ProChannel and 3rd party VSTs in any order I want. Example: ProChannel EQ Fabfilter C - Compressor Fabfilter Volcano 2 ProChannel Tube Saturation PSP Vintage Warmer 2 Or am I wrong? Can you actually do as I wan't to already in an easy way (Similar to Logic) Thanks Your request is more than OK, but, why on earth you need that many EQ/filters, compressors ans saturation processors in the same chain????its not kind of redundant?
http://soundcloud.com/ericdeluxe - my harder side https://soundcloud.com/cirque-du-sonique my softer side *************************************** Sonar Platinum, Windows 10 (64 bit), MOTU Ultralite MK3 Hybrid, Novation SL MKII 25, NI KORE 2, NI Maschine, NI Komplete 9, Yamaha HS50m, AKG K240S, AKG Perception 200, Z3TA 2+, Soundtoys Native Effects, PSP Mixpack 2, several VSTs****************************************
|