microdotgnome
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 2011/03/22 15:28:29
- Location: San Angelo, Texas
- Status: offline
Re:So did X1b fix your bug?
2011/03/22 16:00:51
(permalink)
change that to properly, i hope
|
Grumbleweed_
Max Output Level: -72 dBFS
- Total Posts : 915
- Joined: 2007/11/01 09:13:58
- Location: Southampton, England
- Status: offline
Re:So did X1b fix your bug?
2011/03/22 16:09:51
(permalink)
You can drag rewire programs from the browser now (one of my "bugs") and audiosnap will quantise, but it seems that just using the Audio Transient filter won't get things started. The manual states that the AudioSnap pallette appears when the filter is engaged but it isn't. The markers are gray at first so you mess around to get them yellow, and then you mess around to get them active and then you can quantise. It all seemed a bit painful. The Cakewalk String Section VST thang wouldn't play sustained violin notes the first time I loaded it but it worked the second time I tried! Odd. Grum.
|
pinguinotuerto
Max Output Level: -71 dBFS
- Total Posts : 976
- Joined: 2009/12/01 18:46:41
- Status: offline
Re:So did X1b fix your bug?
2011/03/22 16:11:37
(permalink)
mudgel Has anyone noticed that you can right click on a single channel strip in CV and make it narrow. Yay! Allows you to go and narrow only those channels you want. Shame you can't Ctrl click and multi select. i couldn't find any modifier to do multiples Hey Mudge, In the CV if you go to the Strips Tab, you can narrow or widen all strips at once.
HP DV7-3085 Laptop (Intel Core i7 720 1.6 GHZ, 6 GB RAM, 1333 MHZ FSB, 2 500GB 7200 RPM Internal HDs, 17" screen), HP 2009m Monitor, 2TB Ext Drive Line 6 UX8 with PodFarm 2 Platinum 2 Joe Meek VC6Q British Channels Sonar Platinum & X3e Producer (64 Bit) AD2 w Roland V-Drums (TD4KX2) Windows 7 Home Premium (64 bit)KRK VXT 8 Monitors Frontier Alphatrack, Razer Naga Mouse, nanoKontrol2
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re:So did X1b fix your bug?
2011/03/22 16:15:32
(permalink)
chuckebaby Do you guys install 8.5 & X1 on seperate drives or all softwares on the OS drive? Or what's the best way to have both installed? +1 my friend +1 to seperate drives?
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
rabeach
Max Output Level: -48 dBFS
- Total Posts : 2703
- Joined: 2004/01/26 14:56:13
- Status: offline
Re:So did X1b fix your bug?
2011/03/22 16:58:14
(permalink)
Twigman I won't know until i've downloaded it and tried it but what have you found that has been fixed and what hasn't? My request to fix beatscape drop down menu was not fixed. Any attempt on my part to use it now locks up bitbridge.
|
Combo
Max Output Level: -87 dBFS
- Total Posts : 187
- Joined: 2010/09/08 09:48:52
- Status: offline
Re:So did X1b fix your bug?
2011/03/22 18:13:31
(permalink)
I sent in a bug report (Step Record doesn't work in Staff View for certain note values) and it was acknowledged by CW a while back but isn't in the X1b fix list. Presumably this now has to wait until X1C (???).
|
wetdentist
Max Output Level: -68 dBFS
- Total Posts : 1129
- Joined: 2007/04/12 19:06:25
- Location: Bethlehem, PA USA
- Status: offline
Re:So did X1b fix your bug?
2011/03/23 09:05:05
(permalink)
i tried to see if the FX Chain bug that existed in X1a (where the audio would slow up immensely) still existed . . . and it did last night with X1b. had to delete the FX Chain and manually add each effect
3.5 Ghz AMD 6-Core/16 gigs RAM, Roland Quad-Capture, Win 10, Cakewalk by Bandlab, Komplete 10, z3ta+, Z3TA+ 2, Rapture, Maschine 2.7 (MKI & Jam), Melodyne 4 Studio, Ozone 4, Jam Origin MIDI Guitar 2, Schecter Damien Elite, Fender Sonoran w/TronicalTune Plus installed, etc go here to hear Wet Dentist (2000-2016 RIP) my new sounds: The Das Kaput
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:So did X1b fix your bug?
2011/03/23 09:09:36
(permalink)
pinguinotuerto mudgel Has anyone noticed that you can right click on a single channel strip in CV and make it narrow. Yay! Allows you to go and narrow only those channels you want. Shame you can't Ctrl click and multi select. i couldn't find any modifier to do multiples Hey Mudge, In the CV if you go to the Strips Tab, you can narrow or widen all strips at once. Yes I know that you can change them all or one at a time. I said that. The point is you can't select say 3 or 4 and just narrow or widen them. another function that is short sighted. It's one or all nothing in between.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
LANEY
Max Output Level: -64 dBFS
- Total Posts : 1350
- Joined: 2010/12/11 20:27:13
- Location: USA
- Status: offline
Re:So did X1b fix your bug?
2011/03/23 09:14:28
(permalink)
i7/16GB ram Win 7 x64 SONAR Platinum Producer x64 VS-700 C&R Octa-Capture and VS-100 for live recording
|
chrisharbin
Max Output Level: -56.5 dBFS
- Total Posts : 1852
- Joined: 2010/02/26 19:06:23
- Status: offline
Re:So did X1b fix your bug?
2011/03/24 03:59:48
(permalink)
mousewheel on channel strip: no interleave not working properly: no some snap issues: yes it seems audiosnap: have not tried it New issue: Seems that my projects are opening weird. By weird I mean the inspector/browser/multidock seem to have a bit of a mind of their own.
i7 860/MSI mobo/8GB ram/win7x64ultimate/X2/profire 610/oxygen 61/running 48k currently.
|