X1C wont launch. This is a DISASTER.

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
keith
Max Output Level: -36.5 dBFS
  • Total Posts : 3882
  • Joined: 2003/12/10 09:49:35
  • Status: offline
Re:X1C wont launch. This is a DISASTER. 2011/08/16 21:33:57 (permalink)
LJB


Uninstalled RME Driver AND Sonar in its entirety. Reinstalled the lot up to X1C. Problem persists...

Did you also delete any potentilly saved files... like a certain INI file saved in you ruser folder, perhaps?
 
You could always try renaming AUD.INI and let SONAR recreate it. But first remove the RME entirely... see if you can get SONAR running with a fresh AUD.INI, no RME, as Mike suggests... Then reinstall the RME.
 
 
#31
gustabo
Max Output Level: -49.5 dBFS
  • Total Posts : 2591
  • Joined: 2009/01/05 17:32:38
  • Status: offline
Re:X1C wont launch. This is a DISASTER. 2011/08/16 22:26:01 (permalink)
Did you use ccleaner to clean out your registry?


Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/

#32
LJB
Max Output Level: -60 dBFS
  • Total Posts : 1502
  • Joined: 2009/07/29 10:31:31
  • Location: South Africa
  • Status: offline
Re:X1C wont launch. This is a DISASTER. 2011/08/17 02:54:20 (permalink)
Hi guys, thanks for all this info. I use the RME HDSP9652 in studio.  

I did delete the drivers in Device Manager, and cold rebooted, reinstalled etc. No change. It seems to be n ASIO problem, as the RME will run in WDM mode (useless for my purposes).


I use Iobit's Advances System care, so Reg has been cleaned.

I will try some of the other options suggested today. This did prompt me to buy Acronis (which is on sale today for 29.95) but that'll only help me next time there is an issue.

It's definitely a hardware issue, but wasn't there before X1C. I hate to pin it on anyone, so I'll just blame myself for not being more careful.


Ludwig

post edited by LJB - 2011/08/17 02:55:32

Ludwig Bouwer, One Big Room Studios.
--------------------
Cakewalk with all the trimmings / Win 10Pro 64 / Intel i7-7700 / Asus Prime Z270k / 16GB DDR4 / RME HDSP9652 / RME UFX / Black Lion Audio ADA8000 / ART MPA & ART Pro Channel / Focusrite Voicemaster Pro / Aphex 107

Check out my work at www.onebigroom.co.za
#33
Jim Roseberry
Max Output Level: 0 dBFS
  • Total Posts : 9871
  • Joined: 2004/03/23 11:34:51
  • Location: Ohio
  • Status: offline
Re:X1C wont launch. This is a DISASTER. 2011/08/17 10:11:06 (permalink)
No offense, LJB... but if you're running a studio with booked sessions, you should really backup your system with imaging software like Acronis before doing any updates whatsoever. Then when a problem like this arises, it literally takes about 15 to 20 minutes to get your system back up and running again.

 
True Image is $49.
It'll pay for itself the first time you use it.
No matter what happens (assuming the hardware itself is OK), you'll always be able to quickly/easily get back to a properly working machine.
 
Once Ludwig has things back in order, he should pickup True Image (or similar) and make a backup image file.

Best Regards,

Jim Roseberry
jim@studiocat.com
www.studiocat.com
#34
mudgel
Max Output Level: 0 dBFS
  • Total Posts : 12010
  • Joined: 2004/08/13 00:56:05
  • Location: Linton Victoria (Near Ballarat)
  • Status: offline
Re:X1C wont launch. This is a DISASTER. 2011/08/17 10:22:15 (permalink)
Sometimes I've been caught out by the most obvious error but I couldn't see it.

Do you have Windows sounds enabled and using your sound card. That will always stop ASIO drivers from being used.

Mike V. (MUDGEL)

STUDIO: Win 10 Pro x64, SPlat & CbB x64,
PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz.
Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2.
Monitors: Adam A7X, JBL 10” Sub.
Audio I/O & DSP Server: DIGIGRID IOS & IOX.
Screen: Raven MTi + 43" HD 4K TV Monitor.
Keyboard Controller: Native Instruments Komplete Kontrol S88.
#35
The Maillard Reaction
Max Output Level: 0 dBFS
  • Total Posts : 31918
  • Joined: 2004/07/09 20:02:20
  • Status: offline
Re:X1C wont launch. This is a DISASTER. 2011/08/17 10:32:05 (permalink)
Jim Roseberry



No offense, LJB... but if you're running a studio with booked sessions, you should really backup your system with imaging software like Acronis before doing any updates whatsoever. Then when a problem like this arises, it literally takes about 15 to 20 minutes to get your system back up and running again.

 
True Image is $49.
It'll pay for itself the first time you use it.
No matter what happens (assuming the hardware itself is OK), you'll always be able to quickly/easily get back to a properly working machine.
 
Once Ludwig has things back in order, he should pickup True Image (or similar) and make a backup image file.


I used my True Image license to do a system roll back yesterday. I played my Fender Tele while it did it's thing. It was my first time actually using the restore function after making all those backups. I am so thankful I had that option.

Jim, you were the guy that taught me to use it. Thanks so much!!!


best regards,
mike


#36
Page: < 12 Showing page 2 of 2
Jump to:
© 2024 APG vNext Commercial Version 5.1