BobF
Max Output Level: 0 dBFS
- Total Posts : 8124
- Joined: 2003/11/05 18:43:11
- Location: Missouri - USA
- Status: offline
Now using CCC (from fully avoiding it)
I decided to get on board yesterday, so I updated CCC and went for it. I decided to do a reinstall without uninstalling first :)
Everything went great. Sonar and all of the subitems installed in one go, except for a non-descript error during download. I was bummed to come back after dinner and see an error at the 75% point.
Then I was quite pleased to it pick up where it had left off :)
I don't see any evidence that anything got installed where it shouldn't be; I use a different drive for content.
Interesting notes:
1. When the install for Rapture completed, C3 discovered Rapture Pro and set it green without the need to reinstall.
2. The kickstart installer required interaction, whereas other installers did not.
3. Melodyne gives change/repair/uninstall options
4. XLN AD went really fast ... must've detected rather than reinstall.
I'm now fully converted to C3 from being completely outside of it. I haven't tried rollback/roll forward yet. Overall quite painless with a full green status board.
Bob -- Angels are crying because truth has died ...Illegitimi non carborundum --Studio One Pro / i7-6700@3.80GHZ, 32GB Win 10 Pro x64 Roland FA06, LX61+, Fishman Tripleplay, FaderPort, US-16x08 + ARC2.5/Event PS8s Waves Gold/IKM Max/Nomad Factory IS3/K11U
|
charlyg
Max Output Level: -72 dBFS
- Total Posts : 950
- Joined: 2015/02/27 22:10:47
- Location: West Hills, CA
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 09:16:06
(permalink)
Yup, well worth the few growing pains involved....
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 09:37:06
(permalink)
charlyg
Yup, well worth the few growing pains involved....
Agreed. Growing pains are part of the deal, I guess...I really disliked NI's Service Center when it first appeared (especially when I needed to authorize a plug-in and the server was down). Now it has become an important part of my NI experience and I find it extremely helpful. The CCC is well on its way to being equally cool for SONAR.
|
Doktor Avalanche 
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 09:41:48
(permalink)
Just check your file path settings in CCC and Sonar I suggest. There is a small chance you might need to put in some trivial corrections.
post edited by Doktor Avalanche - 2015/07/14 09:48:45
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 09:45:58
(permalink)
Doktor Avalanche
Just check your file path settings in CCC and Sonar I suggest. There is a small chance you might need to put in some trivial corrections.
Should he do a full reset/rescan of his plugs too? 
|
Doktor Avalanche
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 10:50:15
(permalink)
Spot on Bapu...He might need to if he didn't check this and CCC installed them to the wrong place ;) Yup you thought you were kidding LOL ;)
post edited by Doktor Avalanche - 2015/07/14 10:58:34
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 11:15:02
(permalink)
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 11:56:58
(permalink)
There's a big problem if you want to access the CCC downloaded installers over a network now. This wasn't the case before so it's broken for me. That is to update a laptop.
post edited by mudgel - 2015/07/14 12:03:57
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
BobF
Max Output Level: 0 dBFS
- Total Posts : 8124
- Joined: 2003/11/05 18:43:11
- Location: Missouri - USA
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 12:03:38
(permalink)
I have a couple of NAS devices on my net. Most of the time they aren't "mapped"; no drive letter is assigned.
Have you tried mapping the network drive you want to use? It *might* work again if there is a drive letter associated. Or maybe not. Just thinking out loud.
Bob -- Angels are crying because truth has died ...Illegitimi non carborundum --Studio One Pro / i7-6700@3.80GHZ, 32GB Win 10 Pro x64 Roland FA06, LX61+, Fishman Tripleplay, FaderPort, US-16x08 + ARC2.5/Event PS8s Waves Gold/IKM Max/Nomad Factory IS3/K11U
|
charlyg
Max Output Level: -72 dBFS
- Total Posts : 950
- Joined: 2015/02/27 22:10:47
- Location: West Hills, CA
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 12:07:16
(permalink)
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 12:32:29
(permalink)
Drive letters mapped. The drive is on my Studio PC and it was the default download location for the CCC on my laptop. But with this new version it won't save the location any longer. And there's no rollback for the CCC that I can find. Now that the bulk of the downloads are done we won't have to do so many in the future so all the new features don't amount to a hill o beans for me if this one is broken.
I'll just have to uninstall the CCC and reinstall just to this one but then all the lights will go red by having to log out. Bummer either way. Grrrr. Always something. 2 steps forward one step back.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
BobF
Max Output Level: 0 dBFS
- Total Posts : 8124
- Joined: 2003/11/05 18:43:11
- Location: Missouri - USA
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 12:53:03
(permalink)
Why not just copy the files to a location usable by your laptop after CCC downloads them?
Yeah, I know. Work-arounds suck ....
Have you filled out a problem report?
Bob -- Angels are crying because truth has died ...Illegitimi non carborundum --Studio One Pro / i7-6700@3.80GHZ, 32GB Win 10 Pro x64 Roland FA06, LX61+, Fishman Tripleplay, FaderPort, US-16x08 + ARC2.5/Event PS8s Waves Gold/IKM Max/Nomad Factory IS3/K11U
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Now using CCC (from fully avoiding it)
2015/07/14 14:31:47
(permalink)
mudgel
Drive letters mapped. The drive is on my Studio PC and it was the default download location for the CCC on my laptop. But with this new version it won't save the location any longer.
I don't have a NAS to test, try creating a directory junction.
|