Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
thepianist65
Max Output Level: -78 dBFS
- Total Posts : 644
- Joined: 2004/07/30 15:09:51
- Location: Boston, MA
- Status: offline
Re: March 2016 is now available!!
2016/04/05 14:10:33
(permalink)
I did the early release, and so far so good. But is this a separate upgrade with any differences from the Early Release?
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: March 2016 is now available!!
2016/04/05 14:12:26
(permalink)
The official release appears to be build 71, the last early release build. At least that is what the Command Center shows.
There is an update to the local documentation.
|
Noel Borthwick [Cakewalk]
Cakewalk Staff
- Total Posts : 6475
- Joined: 2003/11/03 17:22:50
- Location: Boston, MA, USA
- Status: offline
Re: March 2016 is now available!!
2016/04/05 14:12:36
(permalink)
☄ Helpfulby FreeFlyBertl 2016/04/05 16:37:22
No difference from build 71. If you downloaded that earlier you are good to go.
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re: March 2016 is now available!!
2016/04/05 14:30:05
(permalink)
In future please remind me to read these threads before I start downloading stuff. 
|
thepianist65
Max Output Level: -78 dBFS
- Total Posts : 644
- Joined: 2004/07/30 15:09:51
- Location: Boston, MA
- Status: offline
Re: March 2016 is now available!!
2016/04/05 15:56:18
(permalink)
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re: March 2016 is now available!!
2016/04/05 16:08:53
(permalink)
March 2016 is available in April 2016?
SONAR has time travel but no hover car?
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: March 2016 is now available!!
2016/04/05 16:13:20
(permalink)
bapu
March 2016 is available in April 2016?
SONAR has time travel but no hover car?
Back to the future?
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: March 2016 is now available!!
2016/04/05 16:40:29
(permalink)
☄ Helpfulby Zargg71 2016/04/05 17:31:36
bapu
March 2016 is available in April 2016?
It will probably be available in May 2016 too.
|
ampfixer
Max Output Level: -20 dBFS
- Total Posts : 5508
- Joined: 2010/12/12 20:11:50
- Location: Ontario
- Status: offline
Re: March 2016 is now available!!
2016/04/05 17:17:44
(permalink)
Anyone else lose their metronome after the update? Mine is dead, nothing on record or playback. Everything is set up and correctly routed. It quit after I created a tempo map using the new drag to timeline feature. A shut down and restart did not help.
Regards, John I want to make it clear that I am an Eedjit. I have no direct, or indirect, knowledge of business, the music industry, forum threads or the meaning of life. I know about amps. WIN 10 Pro X64, I7-3770k 16 gigs, ASUS Z77 pro, AMD 7950 3 gig, Steinberg UR44, A-Pro 500, Sonar Platinum, KRK Rokit 6
|
Noel Borthwick [Cakewalk]
Cakewalk Staff
- Total Posts : 6475
- Joined: 2003/11/03 17:22:50
- Location: Boston, MA, USA
- Status: offline
Re: March 2016 is now available!!
2016/04/06 00:26:10
(permalink)
No known issues with the metronome and no changes in that area.
In fact all the tempo drag video's were made with the metronome on. Try it in a different or new project to verify.
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: March 2016 is now available!!
2016/04/06 00:39:54
(permalink)
ampfixer
Anyone else lose their metronome after the update? Mine is dead, nothing on record or playback. Everything is set up and correctly routed. It quit after I created a tempo map using the new drag to timeline feature. A shut down and restart did not help.
Yep - happened here too, though not while tempo mapping. Try enabling/disabling the fx bypass button in the mix module. Fixed it for me:)
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
ChristopherM
Max Output Level: -56 dBFS
- Total Posts : 1921
- Joined: 2006/08/18 14:31:42
- Location: UK
- Status: offline
Re: March 2016 is now available!!
2016/04/06 04:04:13
(permalink)
Although I scrupulously avoided the Early Access channel (because life is too short to update that frequently) I see that CC reports my current version as Early Access 2016.03 (22.3.0.71). I presume that is "by design".
|
VariousArtist
Max Output Level: -63 dBFS
- Total Posts : 1397
- Joined: 2003/11/07 15:03:09
- Location: London, UK & California, USA
- Status: offline
Re: March 2016 is now available!!
2016/04/06 10:39:06
(permalink)
ampfixer
Anyone else lose their metronome after the update? Mine is dead, nothing on record or playback. Everything is set up and correctly routed. It quit after I created a tempo map using the new drag to timeline feature. A shut down and restart did not help.
Yup, me too. I had to import a cowbell loop as a workaround. You just need more cowbell loops!
|
SMcNamara
Max Output Level: -88 dBFS
- Total Posts : 142
- Joined: 2014/09/26 11:23:12
- Status: offline
Re: March 2016 is now available!!
2016/04/06 10:50:16
(permalink)
ChristopherM
Although I scrupulously avoided the Early Access channel (because life is too short to update that frequently) I see that CC reports my current version as Early Access 2016.03 (22.3.0.71). I presume that is "by design".
It appears so. It would be nice if CCC updated the listing to 2016.03, plain and simple. As for the metronome/cowbell issue, I'll have to check next time I'm on the DAW.
Sonar Platinum | Windows 10 64-bit | 8 cores | 16GB Ram | Focusrite Scarlett 2nd generation 18i20 interface | too many guitars, way too much software | Presonus Eris 8 Monitors (thinking about a Presonus T8 sub!)
|
Jim Lima [Cakewalk]
Administrator
- Total Posts : 615
- Joined: 2003/11/10 09:09:11
- Status: offline
Re: March 2016 is now available!!
2016/04/06 10:52:59
(permalink)
ChristopherM
Although I scrupulously avoided the Early Access channel (because life is too short to update that frequently) I see that CC reports my current version as Early Access 2016.03 (22.3.0.71). I presume that is "by design".
If you go to Command Center > Settings and click Check Now, it should clean up the "Early Access" part of the label for you. Jim
|
javahut
Max Output Level: -83 dBFS
- Total Posts : 361
- Joined: 2005/11/25 19:35:23
- Status: offline
Re: March 2016 is now available!!
2016/04/06 20:27:02
(permalink)
Slowest ever download for a Sonar update. Cakewalk servers getting hit? Downloaded some new music I purchased from Bandcamp and an entire UVI Falcon update/install 1.1.1, both at 3 MBps, each taking about 3 minutes or so... all while the current Sonar has been downloading for about 30 minutes now, and is at 64%.
|
kennywtelejazz
Max Output Level: -3.5 dBFS
- Total Posts : 7151
- Joined: 2005/10/22 06:27:02
- Location: The Planet Tele..X..
- Status: offline
Re: March 2016 is now available!!
2016/04/06 22:51:06
(permalink)
What's the verdict so far on the update ? Are people digging it ?
Kenny
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: March 2016 is now available!!
2016/04/07 02:45:29
(permalink)
VariousArtist
ampfixer
Anyone else lose their metronome after the update? Mine is dead, nothing on record or playback. Everything is set up and correctly routed. It quit after I created a tempo map using the new drag to timeline feature. A shut down and restart did not help.
Yup, me too. I had to import a cowbell loop as a workaround. You just need more cowbell loops!
i did not have any problem with the metronom in 2016.03, but tenfoot posted a way to reactivate it in case it happens ( Try enabling/disabling fx bypass button in mix module) http://forum.cakewalk.com/FindPost/3397051
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
Snehankur
Max Output Level: -80 dBFS
- Total Posts : 507
- Joined: 2014/11/26 00:19:19
- Status: offline
Re: March 2016 is now available!!
2016/04/07 06:06:00
(permalink)
Is there any visual difference in this update from 2016.01 ?
I updated yesterday thought there will be different screen!
|
jb101
Max Output Level: -46 dBFS
- Total Posts : 2946
- Joined: 2011/12/04 05:26:10
- Status: offline
Re: March 2016 is now available!!
2016/04/07 06:31:47
(permalink)
Snehankur
Is there any visual difference in this update from 2016.01 ?
I updated yesterday thought there will be different screen!
There are some GUI enhancements coming up, but not in this update.
|
FCCfirstclass
Max Output Level: -71 dBFS
- Total Posts : 969
- Joined: 2003/11/15 15:02:42
- Location: Las Vegas, Nevada
- Status: offline
Re: March 2016 is now available!!
2016/04/07 10:13:49
(permalink)
javahut
Slowest ever download for a Sonar update. Cakewalk servers getting hit? Downloaded some new music I purchased from Bandcamp and an entire UVI Falcon update/install 1.1.1, both at 3 MBps, each taking about 3 minutes or so... all while the current Sonar has been downloading for about 30 minutes now, and is at 64%.
The downloads come from Amazon servers.
Win 10 Pro x64, 32Gb DDR3 ram, Sonar Platinum, Cubase 9.5, Mackie MCU Pro, Cakewalk VS 100, Roland Octa-Capture, A 800 Pro, Carver M-1.5t amp & C4000 pre amp, various mics, drums and brass instruments. And away we go!
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: March 2016 is now available!!
2016/04/07 10:52:52
(permalink)
kennywtelejazz
What's the verdict so far on the update ? Are people digging it ?
Kenny
Although I opened a thread about this new update, I still haven't done it   .......will do so tonight. Kenny, I expect it to be a good one (just as its been for the past year).....if not, you'll be seeing a lot of chaos on the forums. 
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
bluzdog
Max Output Level: -56 dBFS
- Total Posts : 1928
- Joined: 2007/10/06 17:15:14
- Location: Lakewood, Colorado
- Status: offline
Re: March 2016 is now available!!
2016/04/07 11:09:08
(permalink)
☄ Helpfulby Mesh 2016/04/07 11:45:49
kennywtelejazz
What's the verdict so far on the update ? Are people digging it ?
Kenny
The GUI is the same, The tempo map feature is off the hook cool, the help module is nice. I haven't tried the new AAS synth but it's getting good reviews. So yeah, I'm diggin' it! Rocky
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re: March 2016 is now available!!
2016/04/07 11:39:28
(permalink)
kennywtelejazz
What's the verdict so far on the update ? Are people digging it ?
Kenny
I dig a pony.
|
kennywtelejazz
Max Output Level: -3.5 dBFS
- Total Posts : 7151
- Joined: 2005/10/22 06:27:02
- Location: The Planet Tele..X..
- Status: offline
Re: March 2016 is now available!!
2016/04/07 12:34:43
(permalink)
☄ Helpfulby Zargg71 2016/04/07 17:55:18
Mesh
kennywtelejazz
What's the verdict so far on the update ? Are people digging it ?
Kenny
Although I opened a thread about this new update, I still haven't done it .......will do so tonight.
Kenny, I expect it to be a good one (just as its been for the past year).....if not, you'll be seeing a lot of chaos on the forums.
Hi Mesh , I'm in woodshed mode practicing the guitar over some changes I'm looking to get comfortable playing over . To keep my sanity , I have to balance learning new things as a player along with learning how to use software … I'm thinking about upgrading in the next few days . thanks  bluzdog
kennywtelejazz
What's the verdict so far on the update ? Are people digging it ?
Kenny
The GUI is the same, The tempo map feature is off the hook cool, the help module is nice. I haven't tried the new AAS synth but it's getting good reviews. So yeah, I'm diggin' it!
Rocky
Hi Rocky , That's cool I'm real interested in checking out the Tempo Map and getting The AAS synth … Hmmm , The Help Module ? in my case that may come in super handy because I need all the help I can get bapu
kennywtelejazz
What's the verdict so far on the update ? Are people digging it ?
Kenny
I dig a pony.
Yeah Me Too …. When Gibson came out with guitars that had built in tuning , I couldn't afford one .  So I grabbed a bag of carrots and hired this Old Pony to help keep my guitar in tune ..  thanks guys , Kenny
post edited by kennywtelejazz - 2016/04/07 12:59:22
|
javahut
Max Output Level: -83 dBFS
- Total Posts : 361
- Joined: 2005/11/25 19:35:23
- Status: offline
Re: March 2016 is now available!!
2016/04/07 15:51:40
(permalink)
So I stopped the update last night after it wasn't finished downloading at about 40 minutes in. Retry today... now I get "download files are corrupt" every time I attempt update via Command Center. Command Center version is 1.1.5.0. CC says it's downloading 3 files. However, I only see 2 being downloaded into Command Center-Downloads folder. One is SONAR_Platinum_Setup_22.3.0.71B.exe, the other is SetupLANDR-Cakewalk_1.3.1.exe. I delete those, and attempt updating with Sonar Command Center again... same results... update files are corrupt... same 2 files in Downloads. Is there a 3rd somewhere I need to delete? Never had a single problem, ever, updating Sonar... not even since Command Center. So what's causing this now? Platinum, Win10 x64, i7-5930k, 32GB DDR4 Hyper-X, Samsung SSD 840 Pro. Edit: Finally worked. Logged out of Command Center, shut it down, deleted previously downloaded files. Fired Command Center back up, logged in, ran update... worked this time. Good to go.
post edited by javahut - 2016/04/07 16:25:00
|
deswind
Max Output Level: -71 dBFS
- Total Posts : 952
- Joined: 2003/11/23 14:07:13
- Status: offline
Re: March 2016 is now available!!
2016/04/07 20:24:53
(permalink)
That will be great!!!!
There are some GUI enhancements coming up, but not in this update.
|
Gregmang
Max Output Level: -59.5 dBFS
- Total Posts : 1592
- Joined: 2003/12/31 07:21:57
- Location: Maryland USA
- Status: offline
Re: March 2016 is now available!!
2016/04/07 20:59:54
(permalink)
As long as my Duckbar by Panu still works :)
|
Snehankur
Max Output Level: -80 dBFS
- Total Posts : 507
- Joined: 2014/11/26 00:19:19
- Status: offline
Re: March 2016 is now available!!
2016/04/08 03:25:47
(permalink)
javahut
So I stopped the update last night after it wasn't finished downloading at about 40 minutes in.
Retry today... now I get "download files are corrupt" every time I attempt update via Command Center. Command Center version is 1.1.5.0. CC says it's downloading 3 files. However, I only see 2 being downloaded into Command Center-Downloads folder. One is SONAR_Platinum_Setup_22.3.0.71B.exe, the other is SetupLANDR-Cakewalk_1.3.1.exe. I delete those, and attempt updating with Sonar Command Center again... same results... update files are corrupt... same 2 files in Downloads. Is there a 3rd somewhere I need to delete?
Never had a single problem, ever, updating Sonar... not even since Command Center. So what's causing this now?
Platinum, Win10 x64, i7-5930k, 32GB DDR4 Hyper-X, Samsung SSD 840 Pro.
Edit: Finally worked. Logged out of Command Center, shut it down, deleted previously downloaded files. Fired Command Center back up, logged in, ran update... worked this time. Good to go.
I always go to these links https://www.cakewalk.com/My-Account/Productshttps://www.cakewalk.com/My-Account/Product/CSPT100 Download them from where I get good internet speed. Take them in a pen Drive. Copy to me DAW PC. Double click them individually to install. Then Run Command Centre to check for updates. Command Centre shows ALL GREEN. I use Download accelerator. I never find problem. Regards Snehankur
|