clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
I'll have to try Windows 10 again Later
Because I didn't like it at all. Reverted back to 7.
It may have better performance, but it's a hot mess. Too much BS for me.
Sonar seemed to work just fine. No issues there.
|
joakes
Max Output Level: -72 dBFS
- Total Posts : 905
- Joined: 2006/12/05 15:51:24
- Location: 465 Km South West of Paris
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 00:14:13
(permalink)
As much as i loved W7, i will not be going back there, having too much fun with W10.
Cheers,
Jerry
Built by yours truely : I7-2600@3.4GHz, Asus P67Z68, W10x64 Creator Edition, 32GB RAM, 3 HD's, nVidia 760 GT, Focusrite 18i20 2,d Gen + Ti FW, Oxygen 61 iv Gen, and Edirol SD-20 (yes it works), CbB, Teles, Strats, LP's, Epi Riviera, etc
|
fireberd
Max Output Level: -38 dBFS
- Total Posts : 3704
- Joined: 2008/02/25 14:14:28
- Location: Inverness, FL
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 06:35:16
(permalink)
The only reasons not to go to 10 are (1) Hardware compatibility, (2) Software compatibility (3) Unable to cope with change.
"GCSG Productions" Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors, Ozone 5, Studio One 4.1 ISRC Registered Member of Nashville based R.O.P.E. Assn.
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 07:06:41
(permalink)
I don't really like 10. The snoop factor is huge! They seem interested in stealing from us anything that we will willingly or unknowingly let them take.
It really does offend me.
But I'm still booted to it, mostly because my RME doesn't have DigiCheck or TotalMix for Ubuntu (at least for the UCX).
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
fireberd
Max Output Level: -38 dBFS
- Total Posts : 3704
- Joined: 2008/02/25 14:14:28
- Location: Inverness, FL
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 08:27:37
(permalink)
The "Telemetry" that is sent is anonymous and does not contain any personal information. There has been a lot of press about the monitoring, but its been going on for a long time, not just with Windows 10 and not just Microsoft, Apple does a lot of that too. Check the EULA (End User License Agreement) on many software packages and it is in there too.
"GCSG Productions" Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors, Ozone 5, Studio One 4.1 ISRC Registered Member of Nashville based R.O.P.E. Assn.
|
Doktor Avalanche 
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 08:32:00
(permalink)
I think the specific idea of rolling back to previous windows version will protect your privacy is laughable (not targeting anybody with this comment btw). Win10 data collection can be disabed even upon install without issue leaving you in the same situation as previous windows versions.
post edited by Doktor Avalanche - 2015/09/22 08:41:32
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 08:39:53
(permalink)
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
Doktor Avalanche
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 08:44:36
(permalink)
☄ Helpfulby Mesh 2015/09/22 09:02:17
Tell that to Volkswaggon..
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 09:21:25
(permalink)
This last sunday, I made the upgrade from win 7 to win 10 on my notebook, everything seemed to be fine but, although Line 6 had made available Win 10 drivers for the Guitar Port I use with this notebook, none of my softwares recognised the interface. Surprisingly, Groove and Windows Media player can see the interface and play songs through Guitar Port. I don't have a clue of how to solve this issue. I think I'll have to rollback to win 7....
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
Doktor Avalanche
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 09:23:13
(permalink)
Reinstall/upgrade to the latest drivers.
Cheers..
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 09:45:54
(permalink)
Atsuko
This last sunday, I made the upgrade from win 7 to win 10 on my notebook, everything seemed to be fine but, although Line 6 had made available Win 10 drivers for the Guitar Port I use with this notebook, none of my softwares recognised the interface. Surprisingly, Groove and Windows Media player can see the interface and play songs through Guitar Port. I don't have a clue of how to solve this issue. I think I'll have to rollback to win 7....
I didn't know Line 6 had the Win 10 drivers.......I have the Toneport Gold DI and gave it up (as well as my beloved POD Farm Platinum 2) due to their lack of driver support on Win 8 (at the time).....good to know and will visit Line 6 again. Thanks Atsuko!! Regarding your issue, do what the good Doktor says :)...make sure your Line 6 Monkey Installer is also up to date. If the current drivers for Win 10 won't work, possibly try a previous/older version. You can also try plugging it in a different USB port (may/may not make a difference).
post edited by Mesh - 2015/09/22 09:55:31
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
BassDaddy
Max Output Level: -33 dBFS
- Total Posts : 4232
- Joined: 2012/12/31 13:55:58
- Location: I'm an American. From America!
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 10:03:50
(permalink)
fireberd
The only reasons not to go to 10 are (1) Hardware compatibility, (2) Software compatibility (3) Unable to cope with change.
Bravo Berd, no one has had the guts to say it until you.
It's Bass, not Bass. i7 2700K, 16GB DDR3, 2 SSD sample drives and OS drive, HDD SATAIII for projects, 2 24" monitors Focusrite Saffire Pro 24, Focusrite VRM Box, LAVA Lamp, SONAR Platinum 64 bit, Mackie MCU and 1 MCU XT, Akai Advance 49, Windows 10, Komplete 9 Ultimate, Cakewalk, Toontrack, IK, AAS, XLN, UVI, Air Music Tech, Waves Factory, Sample Tek and Sonivox VSTi's. Overloud, T-Racks, Audio Damage, D16, Nomad Factory, Waves Gold FX
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 10:08:16
(permalink)
Mesh
Atsuko
This last sunday, I made the upgrade from win 7 to win 10 on my notebook, everything seemed to be fine but, although Line 6 had made available Win 10 drivers for the Guitar Port I use with this notebook, none of my softwares recognised the interface. Surprisingly, Groove and Windows Media player can see the interface and play songs through Guitar Port. I don't have a clue of how to solve this issue. I think I'll have to rollback to win 7....
I didn't know Line 6 had the Win 10 drivers.......I have the Toneport Gold DI and gave it up (as well as my beloved POD Farm Platinum 2) due to their lack of driver support on Win 8 (at the time).....good to know and will visit Line 6 again. Thanks Atsuko!!
Regarding your issue, do what the good Doktor says :)...make sure your Line 6 Monkey Installer is also up to date. If the current drivers for Win 10 won't work, possibly try a previous/older version. You can also try plugging it in a different USB port (may/may not make a difference).
I tried everything I could, uninstalled/reinstalled several times!! It seems that the softs cannot see the interface or maybe it's in use by another application but which one? I looked for in the task manager but couldn't find any that could be the culprit...
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 10:16:23
(permalink)
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 10:18:00
(permalink)
fireberd
The only reasons not to go to 10 are (1) Hardware compatibility, (2) Software compatibility (3) Unable to cope with change.
I'll have to cope with the change at some point (our programs won't support Win 7 forever), but It does seem like pointless change, only for pointless change sake. I'll wait until I have the time to waste learning another program the will not benefit me at all. I also own a 2015 Volkswagen Jetta Sport turbo, but it's not diesel.
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 10:29:04
(permalink)
Atsuko
Mesh, they also have Win 10 drivers for you Tone Port: http://line6.com/software/index.html
Thanks Ane!! I'll head on over there tonight and hope the drivers will work. :) (will also post back on my findings once I install) Not sure if this will make a difference in your troubleshooting, but do you see the Tone Port as the default device in your Playback Devices (Win 10 taskbar)? It's been awhile since I used Line 6 stuff, so I'll keep thinking on this and post back if something pops into my head. (sorry Clint, not meaning to hijack your thread)
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 10:35:38
(permalink)
Mesh
Atsuko
Mesh, they also have Win 10 drivers for you Tone Port: http://line6.com/software/index.html
Thanks Ane!!
I'll head on over there tonight and hope the drivers will work. :)
(will also post back on my findings once I install)
Not sure if this will make a difference in your troubleshooting, but do you see the Tone Port as the default device in your Playback Devices (Win 10 taskbar)?
It's been awhile since I used Line 6 stuff, so I'll keep thinking on this and post back if something pops into my head.
(sorry Clint, not meaning to hijack your thread)
Yes, the Guitar Port is the default device and it works very well with Groove (the new Windows player) and Windows Media. Maybe it's a clue, why windows recognizes and uses the interface but Sonar, RX3 & 4, XLN, EZDrummer, etc. cannot?
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 10:52:51
(permalink)
Possibly check what's the sample rate in Tone Port and make sure it matches to what's set in those other software's??
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 11:06:46
(permalink)
Mesh
Possibly check what's the sample rate in Tone Port and make sure it matches to what's set in those other software's??
Tried all that but will try again, later at home. Thanks!
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 11:16:12
(permalink)
Mesh
Atsuko
Mesh, they also have Win 10 drivers for you Tone Port: http://line6.com/software/index.html
Thanks Ane!!
I'll head on over there tonight and hope the drivers will work. :)
(will also post back on my findings once I install)
Not sure if this will make a difference in your troubleshooting, but do you see the Tone Port as the default device in your Playback Devices (Win 10 taskbar)?
It's been awhile since I used Line 6 stuff, so I'll keep thinking on this and post back if something pops into my head.
(sorry Clint, not meaning to hijack your thread)
No problem. As I said...Window 10 seemed to work fine with everything I own. That was something I wanted to know. I'll eventually switch over, but I'm not a fan of all the BS and bloat that Win 10 has. I'm waiting for ADK to go through it and see what optimization needs to be done...if any. I'm just venting.
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 11:20:19
(permalink)
Atsuko
Mesh
Possibly check what's the sample rate in Tone Port and make sure it matches to what's set in those other software's??
Tried all that but will try again, later at home. Thanks!
I was going to suggest to see if the Tone Port works on your Desktop, but it looks like you're using Win 7.........back to the think tank.... :)
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 11:34:38
(permalink)
Mesh
Atsuko
Mesh
Possibly check what's the sample rate in Tone Port and make sure it matches to what's set in those other software's??
Tried all that but will try again, later at home. Thanks!
I was going to suggest to see if the Tone Port works on your Desktop, but it looks like you're using Win 7.........back to the think tank.... :)
Yes!! I was first trying Win 10 on my notebook, it's my guinea pig; I can't have issues on my desktop where everything is working well.
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
Ham N Egz
Max Output Level: 0 dBFS
- Total Posts : 15161
- Joined: 2005/01/21 14:27:49
- Location: Arpadhon
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 11:54:10
(permalink)
Mesh
Atsuko
This last sunday, I made the upgrade from win 7 to win 10 on my notebook, everything seemed to be fine but, although Line 6 had made available Win 10 drivers for the Guitar Port I use with this notebook, none of my softwares recognised the interface. Surprisingly, Groove and Windows Media player can see the interface and play songs through Guitar Port. I don't have a clue of how to solve this issue. I think I'll have to rollback to win 7....
I didn't know Line 6 had the Win 10 drivers.......I have the Toneport Gold DI and gave it up (as well as my beloved POD Farm Platinum 2) due to their lack of driver support on Win 8 (at the time).....good to know and will visit Line 6 again. Thanks Atsuko!!
Regarding your issue, do what the good Doktor says :)...make sure your Line 6 Monkey Installer is also up to date. If the current drivers for Win 10 won't work, possibly try a previous/older version. You can also try plugging it in a different USB port (may/may not make a difference).
TonePort Gold User Here with Pod farms 1 and 2 ALL Working in Win10 Pro,,
Green Acres is the place to be I dont twitter, facebook, snapchat, instagram,linkedin,tumble,pinterest,flick, blah blah,lets have an old fashioned conversation!
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 12:02:42
(permalink)
Ham N Egz
Mesh
Atsuko
This last sunday, I made the upgrade from win 7 to win 10 on my notebook, everything seemed to be fine but, although Line 6 had made available Win 10 drivers for the Guitar Port I use with this notebook, none of my softwares recognised the interface. Surprisingly, Groove and Windows Media player can see the interface and play songs through Guitar Port. I don't have a clue of how to solve this issue. I think I'll have to rollback to win 7....
I didn't know Line 6 had the Win 10 drivers.......I have the Toneport Gold DI and gave it up (as well as my beloved POD Farm Platinum 2) due to their lack of driver support on Win 8 (at the time).....good to know and will visit Line 6 again. Thanks Atsuko!!
Regarding your issue, do what the good Doktor says :)...make sure your Line 6 Monkey Installer is also up to date. If the current drivers for Win 10 won't work, possibly try a previous/older version. You can also try plugging it in a different USB port (may/may not make a difference).
TonePort Gold User Here with Pod farms 1 and 2 ALL Working in Win10 Pro,,
The drivers for the Tone Port and the Guitar Port are the same (my Windows is home premium)... Have you installed the drivers through Line 6 Monkey? And did you do it before or after upgrading to Win 10? I'm reading Line 6 forum and it seems that a lot of people are having issues with Win 10 drivers.
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
Ham N Egz
Max Output Level: 0 dBFS
- Total Posts : 15161
- Joined: 2005/01/21 14:27:49
- Location: Arpadhon
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 12:23:45
(permalink)
I used Line Monkey, after the win 10 upgrade, NOW, all I use the toneport for is a "dongle" for the VSTs, I have another audio interface, So In fairness I cannot attest to the operation of the unit, But, it shows up in device manager and all the Plugs it licenses work fine.
Green Acres is the place to be I dont twitter, facebook, snapchat, instagram,linkedin,tumble,pinterest,flick, blah blah,lets have an old fashioned conversation!
|
Mesh
Max Output Level: 0 dBFS
- Total Posts : 27360
- Joined: 2009/11/27 14:08:08
- Location: Online right here!
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 12:34:59
(permalink)
Ham N Egz
I used Line Monkey, after the win 10 upgrade, NOW, all I use the toneport for is a "dongle" for the VSTs, I have another audio interface, So In fairness I cannot attest to the operation of the unit, But, it shows up in device manager and all the Plugs it licenses work fine.
I'll be using it for this as well as recording directly using the Toneport guitar amps/fx etc.....IF the drivers will work with Win 10.
Platinum Gaming DAW: AsRock Z77 Overclock FormulaI7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X 250GB OS SSD : 3TB HDD : 1TB Sample HDDWin 10 Pro x 64 : NH-D14 CPU Cooler HIS IceQ 2GB HD 7870Focusrite Scarlett 2i4The_Forum_Monkeys
|
SF_Green
Max Output Level: -62 dBFS
- Total Posts : 1403
- Joined: 2005/09/13 20:37:55
- Location: San Francisco
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 12:47:11
(permalink)
fireberd
The only reasons not to go to 10 are (1) Hardware compatibility, (2) Software compatibility (3) Unable to cope with change.
You left out the biggest reason: Privacy.
AMD FX-8370, Gigabyte 990FXA-UD3, Win7x64 SP1, 16Gb CorsairDDR3-1600, GeForce GTX 950 (390.65), SSD 525Gb (OS), SATA 3 & 1.5Tb, MOTU microlite, RME FireFace 800 (D 3.124, fw 2.77), UAD-2Q, Adam A7X, A-800 PRO, CC121 Cubase Pro 10.0.5, SonarPt- 2017.10 (x64), Reason10.2, Live 10.0.5 Suite, Wavelab Elements 9.5.40, Komplete10Ult, POD Farm2.5, Omnisphere2.5, BFD3, Alesis QS7.1, Arturia BeatStep Pro, POD HD500, Alesis ControlPad, ARP Omni, many things with strings. GrSltz My Studio
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/22 12:48:02
(permalink)
Ham N Egz
I used Line Monkey, after the win 10 upgrade, NOW, all I use the toneport for is a "dongle" for the VSTs, I have another audio interface, So In fairness I cannot attest to the operation of the unit, But, it shows up in device manager and all the Plugs it licenses work fine.
Can you see if your recording softwares detected the interface? My windows also detected it...
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
Ham N Egz
Max Output Level: 0 dBFS
- Total Posts : 15161
- Joined: 2005/01/21 14:27:49
- Location: Arpadhon
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/23 12:34:23
(permalink)
Atsuko
Ham N Egz
I used Line Monkey, after the win 10 upgrade, NOW, all I use the toneport for is a "dongle" for the VSTs, I have another audio interface, So In fairness I cannot attest to the operation of the unit, But, it shows up in device manager and all the Plugs it licenses work fine.
Can you see if your recording softwares detected the interface? My windows also detected it...
It does ,SPLAT list it under audio drivers
Green Acres is the place to be I dont twitter, facebook, snapchat, instagram,linkedin,tumble,pinterest,flick, blah blah,lets have an old fashioned conversation!
|
fireberd
Max Output Level: -38 dBFS
- Total Posts : 3704
- Joined: 2008/02/25 14:14:28
- Location: Inverness, FL
- Status: offline
Re: I'll have to try Windows 10 again Later
2015/09/23 12:47:51
(permalink)
I don't have a Toneport, but my POD X3 connects OK to the Monkey. And my POD Farm 2 works OK in Sonar. Win 10 Pro.
"GCSG Productions" Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors, Ozone 5, Studio One 4.1 ISRC Registered Member of Nashville based R.O.P.E. Assn.
|