Sylvan
Max Output Level: -75 dBFS
- Total Posts : 793
- Joined: 2005/04/14 14:51:02
- Location: San Diego, CA-USA
- Status: offline
I've Been Checking Out the May Early Release...
I tested out Ripple Edit...
I can delete Hole, even if no data is in the selected area and it works. If I have Ripple Edit Selection checked, only data in that track is shifted. If I have Ripple Edit All checked, all data in all tracks is shifted from that point on.
I tested Ripple Edit by moving clips around the Timeline by dragging the clip headers. All seems working as expected so far. It feels very nice and solid.
The Copy/Paste Special options are working as well. I copied selections that contained Markers and Tempo Changes. All worked as expected while still respecting my Ripple Edit options.
I very much want to read the EZine!
SONAR Platinum RME Fireface UFX Tascam US 20X20 Tascam US 16X08 Intel i7-5830K LGA2011V3 (6 CORE) Asus X99-AII Corsair Vengeance DDR4 32GB Geeforce GTX 970 4GB
|
stickman393
Max Output Level: -60 dBFS
- Total Posts : 1528
- Joined: 2003/11/07 18:35:26
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 03:21:28
(permalink)
Nice, thanks. Ditto on the e-zine sentiment
|
Kamikaze
Max Output Level: -45 dBFS
- Total Posts : 3013
- Joined: 2015/01/15 21:38:59
- Location: Da Nang, Vietnam
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 03:40:36
(permalink)
Good to see a new Limiter to replace Boost. I've held off buying and have been happy with Concrete (ok so I didn't really hold off completely). I was hoping this was in the pipeline after after the LP EQ and MB were updated.
|
bitman
Max Output Level: -34 dBFS
- Total Posts : 4105
- Joined: 2003/11/06 14:11:54
- Location: Keystone Colorado
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 03:54:00
(permalink)
Must have been a bear to implement with such a senior code base.
Kudos to whomever put in the days to get this done.
|
karhide
Max Output Level: -81 dBFS
- Total Posts : 457
- Joined: 2007/03/30 04:22:13
- Location: Southampton / Paris
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 07:58:17
(permalink)
Just had me first play on my Surface with the pen and it's loads better for adding and editing notes in the PRV :)
Studio: Sonar Platinum/Cakewalk by Bandlab Intel Core i7 32GB RAM Samsung Evo 1TB system drive Windows 10 64bit - RME FireFace UFX - Focusrite OctoPre MK II - Audient Mico Mobile: Sonar Platinum/Cakewalk by Bandlab Intel Core i7 8GB RAM Samsung Evo 1TB system drive Windows 10 64bit - RME FireFace 400 Mobile2: Cakewalk by Bandlab Intel Core i7 8GB RAM 256 GB System Drive Windows 10 64 bit http://www.karhide.co.uk/https://karhide.bandcamp.com
|
Bassman002
Max Output Level: -84 dBFS
- Total Posts : 321
- Joined: 2014/12/19 05:51:16
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 12:06:10
(permalink)
HI:)
Can't find out how to work with Ripple Edit:(
Just a simple track with 4 Clips!
In that order 1,2,3,4
Tried to take 1 clip and move it, but then all of the other clips are selected too, so I copied clip 1 and moved it between 2 and 3, ok that works, the other clips moved too.
But how can I just change the order, maybe 1 is a verse and 2 the chorus , how can I only change the order to
2,1,3,4 ??
Can't figure out how to do that with Riple Edit. Ctrl is for Copying, Alt is to Cut, all other combinations do nothing..
What must I change in Drag and Drop Options and what shall I take for Riple Edit, All or Selection?
I've tried every Combination but no effort!
Maybe I don't know nothing about these gestures (whatever this is) in the description for Riple Edit..
Thanks,
Bassman.
|
Keith Albright [Cakewalk]
Max Output Level: -68 dBFS
- Total Posts : 1117
- Joined: 2006/07/10 15:44:42
- Location: Boston, MA
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 13:58:26
(permalink)
Most straightforward way to rearrange like that?
Select 1's range in the ruler. This is easier if you have markers because it's just one click above the section to select the range.
New to 05 is that selecting in the ruler if there's no selection selects all, so you can easily select a range for rearranging/export/etc. in 1 step!
Turn on Ripple Edit All in Track View -> Options.
Cut the range for say section 1. 2 moves to fill in the space where 1 was.
Set the now time to the end of 2.
Ensure the active track is the top one (name is highlighted)
Paste. Now you have 2, 1, 3, 4
Keith
|
SMcNamara
Max Output Level: -88 dBFS
- Total Posts : 142
- Joined: 2014/09/26 11:23:12
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 15:12:19
(permalink)
Sylvan
I tested out Ripple Edit...
Or you could just test this! (Knowing what this is dates you  )  So far Ripple Editing works great, once I found it under "Options".
Sonar Platinum | Windows 10 64-bit | 8 cores | 16GB Ram | Focusrite Scarlett 2nd generation 18i20 interface | too many guitars, way too much software  | Presonus Eris 8 Monitors (thinking about a Presonus T8 sub!)
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 15:51:44
(permalink)
☄ Helpfulby Steve_Karl 2017/05/28 12:58:17
Also worthy of note: There are new keyboard shortcuts for the revised PRV functions, and the old ones are back.
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 15:56:21
(permalink)
☄ Helpfulby maximumpower 2017/05/27 19:18:35
stickman393
Nice, thanks. Ditto on the e-zine sentiment
I've sent it to the Bakers for proofing, a release this comprehensive means more opportunities for me to make mistakes . Once they sign off, it will be re-launched with the official 2017.05 release as an actual magazine. I already noticed a few things I missed - like I forgot to mention in the section on Ripple Editing that ripple edits move markers and tempos. The first issue is over 50 pages, so it was not a trivial undertaking . I've already started on the June issue so as not to fall behind.
|
Jesse G
Max Output Level: -32.5 dBFS
- Total Posts : 4282
- Joined: 2004/04/14 01:43:43
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 17:39:50
(permalink)
SMcNamara
Sylvan
I tested out Ripple Edit...
Or you could just test this! (Knowing what this is dates you )
So far Ripple Editing works great, once I found it under "Options".
My father and his friends used to drink Ripple while playing cards late Friday nights in the living room. They would talk a lot of junk to one another, but they sipped the Ripple and laughed a lot and kept playing cards to the early hours of the morning.
Peace,Jesse G.  A fisher of men <>< ==============================Cakewalk and I are going places together!
Cakewalk By Bandlab, Windows 10 Pro- 64 bit, Gigabyte GA-Z97X-SLI, Intel Core i5-4460 Haswell Processor, Crucial Ballistix 32 GB Ram, PNY GeForce GTX 750, Roland Octa-Capture, Mackie Big Knob, Mackie Universal Controller (MCU), KRK V4's, KRK Rockit 6, Korg TR-61 Workstation, M-Audio Code 49 MIDI keyboard controller.[/
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 17:59:29
(permalink)
☄ Helpfulby FCCfirstclass 2017/05/28 14:26:30
I gotta say...the more I work with this release, the more I think the Bakers really did an exceptional job. I assume that given the magnitude of the changes there will probably be a few things to clean up, but overall, between Ripple Editing, the Pen, the PRV additions, the Adaptive Limiter, and the fixes, this is pretty darn amazing.
|
outland144k
Max Output Level: -72 dBFS
- Total Posts : 934
- Joined: 2008/11/07 20:26:41
- Location: I think I'm in front of my computer.
- Status: offline
|
gustabo
Max Output Level: -49.5 dBFS
- Total Posts : 2591
- Joined: 2009/01/05 17:32:38
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 19:09:49
(permalink)
outland144k
Hey guys, this is probably a really stupid question (R.S.Q.), but is anyone else having a problem finding the Adaptive Limiter? Where should it show up? I checked the obvious Plug-in Browser and I didn't see it. This seems all the more odd as it appeared that when SPlat started, it did add a plug-in to my list. (I didn't note which one it added; I kind of guessed it was Adaptive Limiter).
Thank you for indulging me on my R.S.Q.
Did you install the Engineering package update?
Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/
|
outland144k
Max Output Level: -72 dBFS
- Total Posts : 934
- Joined: 2008/11/07 20:26:41
- Location: I think I'm in front of my computer.
- Status: offline
|
outland144k
Max Output Level: -72 dBFS
- Total Posts : 934
- Joined: 2008/11/07 20:26:41
- Location: I think I'm in front of my computer.
- Status: offline
|
karhide
Max Output Level: -81 dBFS
- Total Posts : 457
- Joined: 2007/03/30 04:22:13
- Location: Southampton / Paris
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 19:20:58
(permalink)
You can find it as one of the sub Sonar items in Command Center
Studio: Sonar Platinum/Cakewalk by Bandlab Intel Core i7 32GB RAM Samsung Evo 1TB system drive Windows 10 64bit - RME FireFace UFX - Focusrite OctoPre MK II - Audient Mico Mobile: Sonar Platinum/Cakewalk by Bandlab Intel Core i7 8GB RAM Samsung Evo 1TB system drive Windows 10 64bit - RME FireFace 400 Mobile2: Cakewalk by Bandlab Intel Core i7 8GB RAM 256 GB System Drive Windows 10 64 bit http://www.karhide.co.uk/https://karhide.bandcamp.com
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 19:46:45
(permalink)
☄ Helpfulby Steve_Karl 2017/06/02 13:14:41
While not necessary to do it all, the complete 2017.05 early release requires rolling back - SONAR Platinum - for ripple edit, SONAR updates and fixes
- Engineering FX Suite - for Adaptive Limiter
- Platinum Instrument Collection - for updated Ultra Analog Session 2
- Boutique FX Suite - for updated TH3
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 19:47:28
(permalink)
Anderton
stickman393
Nice, thanks. Ditto on the e-zine sentiment
I've sent it to the Bakers for proofing, a release this comprehensive means more opportunities for me to make mistakes . Once they sign off, it will be re-launched with the official 2017.05 release as an actual magazine. I already noticed a few things I missed - like I forgot to mention in the section on Ripple Editing that ripple edits move markers and tempos.
The first issue is over 50 pages, so it was not a trivial undertaking . I've already started on the June issue so as not to fall behind.
Craig, This is so much appreciated!!! Thanks for your efforts and thanks to Cakewalk for reviving the eZine.
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
outland144k
Max Output Level: -72 dBFS
- Total Posts : 934
- Joined: 2008/11/07 20:26:41
- Location: I think I'm in front of my computer.
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 19:56:13
(permalink)
scook
While not necessary to do it all, the complete 2017.05 early release requires rolling back
- SONAR Platinum - for ripple edit, SONAR updates and fixes
- Engineering FX Suite - for Adaptive Limiter
- Platinum Instrument Collection - for updated Ultra Analog Session 2
- Boutique FX Suite - for updated TH3
Hi Scook. I was amazed by all the updates under the Platinum heading when I checked. This update was bigly indeed.
“Beer is proof God loves us and wants us to be happy” is attributed to Benjamin Franklin perhaps in error, but the thought remains a worthy sentiment nonetheless. 
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 19:59:44
(permalink)
If you see updates required in the Command Center, they are not related to the early release. They are updates already officially released. The Early Release updates only show up in the rollback menus of the affected installers.
|
bokchoyboy
Max Output Level: -86 dBFS
- Total Posts : 238
- Joined: 2015/07/20 11:05:13
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 20:11:45
(permalink)
Anderton
stickman393
Nice, thanks. Ditto on the e-zine sentiment
I've sent it to the Bakers for proofing, a release this comprehensive means more opportunities for me to make mistakes . Once they sign off, it will be re-launched with the official 2017.05 release as an actual magazine. I already noticed a few things I missed - like I forgot to mention in the section on Ripple Editing that ripple edits move markers and tempos.
The first issue is over 50 pages, so it was not a trivial undertaking . I've already started on the June issue so as not to fall behind.
Can't wait!!!!
|
bwbalint
Max Output Level: -85 dBFS
- Total Posts : 296
- Joined: 2015/03/28 17:13:56
- Location: Eastern USA
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 20:18:57
(permalink)
All of these updates are awesome for me and will allow translation of my musical ideas into digitized form much smoother.
CbB latest incarnation, Focusrite Scarlett (2nd generation), WIN10 1809 build, , MCU pro , Yamaha Motif classic 6 , focusrite ASA one
|
outland144k
Max Output Level: -72 dBFS
- Total Posts : 934
- Joined: 2008/11/07 20:26:41
- Location: I think I'm in front of my computer.
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/27 20:44:43
(permalink)
scook
If you see updates required in the Command Center, they are not related to the early release. They are updates already officially released. The Early Release updates only show up in the rollback menus of the affected installers.
Yes. I got that; my language was imprecise. I meant to say that I found all the Early Access under SPlat. Thanks again for all you do!
“Beer is proof God loves us and wants us to be happy” is attributed to Benjamin Franklin perhaps in error, but the thought remains a worthy sentiment nonetheless.
|
Fabio Rubato
Max Output Level: -81 dBFS
- Total Posts : 500
- Joined: 2006/09/01 21:51:29
- Location: Australia
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/28 00:14:20
(permalink)
Sonar: Platinum, (X3e) - x64 PC: Win10 Pro 64; Computer: Gigabyte Z68X-UD3R-B3; Intel i7, 2600k @ 4.2 (8 Cores); 16 GB Corsair Ram; Visual Card: Gigabyte GTX 580; Audio Interface: RME UFX; Monitors: Adam A77X, Sub8; Midi Controllers: Komplete Kontrol S88, Novation Bass Station 2; NI Maschine Mk 2; Other Hardware: Joe Meek Twin Q Dual Studio Channel; Mics: RODE NT2-A, ASTON Spirit Latest Song: Lay Down Before the War
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/28 00:31:04
(permalink)
This update is more akin to what used to be a major point release rather than a monthly release.
Amazed at the work going on behind the scenes that delivers this quality of work. Congrats bakers.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/28 00:41:37
(permalink)
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
CakeHulk
Max Output Level: -89 dBFS
- Total Posts : 63
- Joined: 2015/01/22 00:31:35
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/28 00:55:20
(permalink)
|
craigr68
Max Output Level: -88 dBFS
- Total Posts : 102
- Joined: 2015/08/26 14:06:58
- Status: offline
Re: I've Been Checking Out the May Early Release...
2017/05/28 02:11:09
(permalink)
I had a project that would not stop at end even though I had tried all the suggestions in various postings about this problem. I searched thru all automations, looked for hidden midi events, selected all tracks and did the delete hole routine, checked for hidden tracks, etc, etc. I even temporarily deleted every track and buss, and still nothing would solve this problem on this one particular project. But then thankfully ripple edit comes along - Solved in about 10 seconds!
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
|