Shame on you!
 

There is no place (I know of) that is called Texas Norway, Ed 
I think Tom is correct in suggesting that my FW card is from the very outskirts of Texas... 
To be honest, I (for once) trusted the sales person that sold me the card. Shame on me 
The tool is working somewhat in Win 10. It only states 2 of my 16 Gb of RAM, and does not recognize OS. It also does not find any TI FW card, so I will have to find one myself
All the best.

You guys would not happen to be able to recommend a card for a fellow FW 1884 user?
All the best.

Zargg71
You guys would not happen to be able to recommend a card for a fellow FW 1884 user?
All the best.

http://forum.cakewalk.com/FindPost/3318590
 
I believe that I used a Belkin with success before I went with an on-board FW. I don't think they are made anymore.

Jumped from 7 to 10 here with an FW1082 and if anything I have more stability. I had to download and install the Legacy firewire driver but other than that it was easy peasy.

bapu
 
http://forum.cakewalk.com/FindPost/3318590
 

Thanks, Ed. Will see what can be bought (affordable) and shipped to Norway.
Ebay or something, here I come...

daryl1968
Jumped from 7 to 10 here with an FW1082 and if anything I have more stability. I had to download and install the Legacy firewire driver but other than that it was easy peasy.

Thanks for sharing. Will probably have (even) more luck with an appropriate FW card.
All the best.

Ken,
Check this thread
I have 3 PCIe cards, two different ADS and one Adaptec; all with the TI chipset.
Let me know if you hit a "brick wall".
 
T

Thanks for following up, Tom. I took Jim's advice, and went for an affordable Syba FW card, with TI chipset.
This one: http://www.ebay.com/itm/Syba-Low-Profile-PCIe-1394b-1394a-2B1A-Card-TI-Chipset-Extra-Regular-Bracket-/400825761465?hash=item5d5313beb9:g:rugAAOSwI-BWGxOD
All the best.

Hopefully that should do the trick!
The ADS Pyro's and Adaptec's were the "bomb" at one time, but dried up.
It will be interesting to see if it was the card or the OS...
The last couple of days my FW(#1) has been a little "wonky".
I get into a session and she stops sending to Sonar.
In Sonar if I pull a fader, Mute, Solo, arm a track; all show up on the board, but she stops sending.
Have to re-boot windows to get her back. Gotta pull #2 out of mothballs and see what's what.
 
T