Sanderxpander
Max Output Level: -36.5 dBFS
- Total Posts : 3873
- Joined: 2013/09/30 10:08:24
- Status: offline
Re: Melodyne still not sync'ed
2014/03/19 19:09:12
(permalink)
Darn it. I need this working too.
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 2009/10/11 12:16:43
- Location: Fort Smith, AR
- Status: offline
Re: Melodyne still not sync'ed
2014/03/19 19:35:19
(permalink)
I clicked "modify". Did I blow it up? I haven't turned on Melodyne in few months.
|
Splat 
Max Output Level: 0 dBFS
- Total Posts : 8672
- Joined: 2010/12/29 15:28:29
- Location: Mars.
- Status: offline
Re: Melodyne still not sync'ed
2014/03/19 19:42:57
(permalink)
Verify you are running version 2.1.2
Cheers..
Sell by date at 9000 posts. Do not feed. @48/24 & 128 buffers latency is 367 with offset of 38. Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
|
wetdentist
Max Output Level: -68 dBFS
- Total Posts : 1129
- Joined: 2007/04/12 19:06:25
- Location: Bethlehem, PA USA
- Status: offline
Re: Melodyne still not sync'ed
2014/03/19 19:49:06
(permalink)
i am running version 2.1.2 on Windows 7 x64
3.5 Ghz AMD 6-Core/16 gigs RAM, Roland Quad-Capture, Win 10, Cakewalk by Bandlab, Komplete 10, z3ta+, Z3TA+ 2, Rapture, Maschine 2.7 (MKI & Jam), Melodyne 4 Studio, Ozone 4, Jam Origin MIDI Guitar 2, Schecter Damien Elite, Fender Sonoran w/TronicalTune Plus installed, etc go here to hear Wet Dentist (2000-2016 RIP) my new sounds: The Das Kaput
|
Splat
Max Output Level: 0 dBFS
- Total Posts : 8672
- Joined: 2010/12/29 15:28:29
- Location: Mars.
- Status: offline
Re: Melodyne still not sync'ed
2014/03/19 20:00:04
(permalink)
Appears documented as fixed in X3E ... "Resolved an issue where Melodyne blobs in RegionFX clips were not lining up with the grid at certain tempos" I suggest logging a new issue point to this thread with your steps to reproduce, and pasting the issue number here: http://www.cakewalk.com/support/contact/problemreport.aspx Thanks.
Sell by date at 9000 posts. Do not feed. @48/24 & 128 buffers latency is 367 with offset of 38. Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
|
wetdentist
Max Output Level: -68 dBFS
- Total Posts : 1129
- Joined: 2007/04/12 19:06:25
- Location: Bethlehem, PA USA
- Status: offline
Re: Melodyne still not sync'ed
2014/03/20 09:20:26
(permalink)
i will fill out a form, but last night my blobs were off by 1/8 note
3.5 Ghz AMD 6-Core/16 gigs RAM, Roland Quad-Capture, Win 10, Cakewalk by Bandlab, Komplete 10, z3ta+, Z3TA+ 2, Rapture, Maschine 2.7 (MKI & Jam), Melodyne 4 Studio, Ozone 4, Jam Origin MIDI Guitar 2, Schecter Damien Elite, Fender Sonoran w/TronicalTune Plus installed, etc go here to hear Wet Dentist (2000-2016 RIP) my new sounds: The Das Kaput
|
Taurean Mixing
Max Output Level: -84 dBFS
- Total Posts : 312
- Joined: 2006/05/20 12:15:19
- Location: NY
- Status: offline
Re: Melodyne still not sync'ed
2014/03/21 00:04:22
(permalink)
Guys, I have submitted a report for this bug. Also Noel, I hope you got my PM and downloaded the session file. The 10 mb limit with the report submission is not very useful, since it is such a small value.
Any way, here is a quick work around for now: click the "FX" button on your toolbar to turn off all VST plugins. Then work on your vocal tracks and when you're done, engage your plugins back into the session. It is definitely when certain plugins are working when this issue arises, at least so far from what I've tested. I would be curious to know what plugins you guys have running when experiencing this issue.
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: Melodyne still not sync'ed
2014/03/21 00:18:11
(permalink)
Might this relate to plug-ins with look-ahead?
|
Splat
Max Output Level: 0 dBFS
- Total Posts : 8672
- Joined: 2010/12/29 15:28:29
- Location: Mars.
- Status: offline
Re: Melodyne still not sync'ed
2014/03/21 04:49:49
(permalink)
@Transcending Music do you have an issue number you could post?
Thanks.
Sell by date at 9000 posts. Do not feed. @48/24 & 128 buffers latency is 367 with offset of 38. Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
|
neirbod
Max Output Level: -84 dBFS
- Total Posts : 343
- Joined: 2005/05/09 12:27:26
- Status: offline
Re: Melodyne still not sync'ed
2014/03/21 06:55:53
(permalink)
Transcending Music
Any way, here is a quick work around for now: click the "FX" button on your toolbar to turn off all VST plugins. Then work on your vocal tracks and when you're done, engage your plugins back into the session. It is definitely when certain plugins are working when this issue arises, at least so far from what I've tested. I would be curious to know what plugins you guys have running when experiencing this issue.
Good catch, and a helpful workaround. Thanks.
----------------- Windows 7 64Sonar PlatinumIntel i7 3.4 GHzGigabyte GA-H67A-UD3H-B3 moboRME UFX and UCX
|
Taurean Mixing
Max Output Level: -84 dBFS
- Total Posts : 312
- Joined: 2006/05/20 12:15:19
- Location: NY
- Status: offline
Re: Melodyne still not sync'ed
2014/03/21 12:05:22
(permalink)
You are welcome, it is a good workaround 'til the fix.
The issue number is CWBRN-24814
|
wetdentist
Max Output Level: -68 dBFS
- Total Posts : 1129
- Joined: 2007/04/12 19:06:25
- Location: Bethlehem, PA USA
- Status: offline
Re: Melodyne still not sync'ed
2014/03/21 21:04:57
(permalink)
thanks for the workaround. hope this gets fixed in X3
3.5 Ghz AMD 6-Core/16 gigs RAM, Roland Quad-Capture, Win 10, Cakewalk by Bandlab, Komplete 10, z3ta+, Z3TA+ 2, Rapture, Maschine 2.7 (MKI & Jam), Melodyne 4 Studio, Ozone 4, Jam Origin MIDI Guitar 2, Schecter Damien Elite, Fender Sonoran w/TronicalTune Plus installed, etc go here to hear Wet Dentist (2000-2016 RIP) my new sounds: The Das Kaput
|
Splat
Max Output Level: 0 dBFS
- Total Posts : 8672
- Joined: 2010/12/29 15:28:29
- Location: Mars.
- Status: offline
Re: Melodyne still not sync'ed
2014/03/22 06:40:00
(permalink)
Transcending Music
You are welcome, it is a good workaround 'til the fix.
The issue number is CWBRN-24814
Thanks :)
Sell by date at 9000 posts. Do not feed. @48/24 & 128 buffers latency is 367 with offset of 38. Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
|
martinv
Max Output Level: -88 dBFS
- Total Posts : 138
- Joined: 2012/07/28 02:25:07
- Status: offline
Re: Melodyne still not sync'ed
2014/03/22 20:00:38
(permalink)
neirbod
Seth Kellogg [Cakewalk
No, I understand the actual issue. You're pointing out that some users don't read the Melodyne installer prompt. If a user can't read an installer prompt, which in Celemony's defense is quite informative, what says they'll read documentation we present?
I found the Melodyne installer prompt confusing as well. I read it, just didn't quite understand what button to push in the context of a patch. Any way to make it clearer would be appreciated.
I found the Melodyne installer prompt confusing as well. I purchased Melodyne Editor but didn't hit cancel as I figured the update may have something to improve compatibility. I think the quality assurance engineers should consider things that seem obvious to them may not be for the new or even average user.
SONAR Platinum 2016.03 (22.3.0.71), Windows 7 Professional (Service Pack 1) 64-bit, 6.1, build: 7601 (x64) CPU: GenuineIntel Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz. RAM:6142 MB total. Focusrite Saffire PRO 40 Firewire, NVIDIA Geforce 210, 3-monitors via HDMI& DVI, 3rd monitor is via active splitter from main monitor.
|
rebel007
Max Output Level: -72 dBFS
- Total Posts : 926
- Joined: 2013/07/17 11:24:29
- Location: Victoria, Australia
- Status: offline
Re: Melodyne still not sync'ed
2014/03/23 08:12:28
(permalink)
Yes, I originally thought that because there was a fix for the Melodyne issue, then I should press the "modify" button in the installer, as this would apply the fix.
In the moderator's defence Alex, the melodyne installer is the last option in the installer and pops up after Sonar has installed, it is also a cumulative update and would need to be installed if you didn't have the latest version. But I do agree it is confusing and should be documented. The update does not need to be applied if you already have the latest version installed.
Home Built Desktop Computer: Intel Core i5 750: 4Mb RAM: NVidia 210 Silent: Windows 10 32bit: Sonar Platinum: Roland OctaCapture Presario CQ41 Laptop: Intel Core i5 760: 4Mb RAM: Windows 10 32bit: Sonar Platinum (Retired) CbB on HP Pavilion Laptop 64bit: GeForce Video Card: Intel 8550: 256GB SSD 1TB Data Drive: Windows10 64bit
|
Guitarmech111
Max Output Level: -24.5 dBFS
- Total Posts : 5085
- Joined: 2003/11/06 10:18:53
- Location: Bayou City, TX
- Status: offline
Re: Melodyne still not sync'ed
2014/03/23 09:08:02
(permalink)
The Melodyne installer was confusing here too... I also hit modify. I have the full editor too.
Peace, Conley Shepherd Joyful Noise Productions PC config: (Win performance base score = 7.7) ASUS Sabertooth 990 FX -amd fx-8150 - core processor am3+ - 32G Corsair 1066 DDR3 - PNY GTX670 2g gddr5 - Corsair Force SSD 120G - Samsung 750G SATA drives - WD 1tb Black (Audio files) - WD 2TB for storage - RME UFX - USB ASIO 2/2016 drivers Win8  Without a mess, there is no message
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Re: Melodyne still not sync'ed
2014/04/25 01:02:03
(permalink)
Sorry to rake up an old thread, but I was thinking about this Melodyne "blobs not lining up" issue tonight. Could it possibly be (and bear with me here  ) that this is -at least in some cases - two adjacent slip-edited clips each with their own region FX? Because the first Melodyne region is going to show the blobs not only from the visible part of the clip but also the rest of the clip that's been slip edited out of sight. So when you play back the audio, the Melodyne cursor is going to continue on past the point of the slip edit to the "hidden" part of the clip. But on Sonar's timeline, of course, playback goes on to the 2nd clip. In other words, the Melodyne window is not a direct mirror of what's going on in the track, it's showing what's going on in the clip, part of which may have been slip-edited away. I hope I'm making sense here. Probably not.
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|