mitchpetel
Max Output Level: -85 dBFS
- Total Posts : 275
- Joined: 11/6/2007
- Location: London, Ontario, Canada
- Status: offline
Re: Roland Quad Capture - Sonar X1 - Audio Settings help!!!!
January 04, 17 8:44 AM
(permalink)
Sonar X1 Studio, Win 10 64bit , Roland Quad-Capture, (Alesis MultiMix16 USB 2.0 , Zoom R16), M Audio KeyRig 49 USB controller ezDrummer, NI Studio Drummer, Groove Monkee MIDI loops, PODxt,
|
...wicked
Max Output Level: -1.5 dBFS
- Total Posts : 7360
- Joined: 12/18/2003
- Location: Seattle
- Status: offline
Re: Roland Quad Capture - Sonar X1 - Audio Settings help!!!!
January 04, 17 1:02 PM
(permalink)
Hrm interesting. Sorry my replies were short previously, I was hitting this on a phone on a bus. :-)
Did you check the Quad applet to make sure there's nothing fishy in your routings? I would think after a reinstall it wouldn't be the case but worth checking.
I had major problems with my Octa Capture until I switched to WASAPI for driver mode, which cleared everything up. Maybe try different bit-depth settings to see if the problem goes away?
It's a shame the Roland partnership didn't produce tighter integration here. I also think the Capture units are gonna get orphaned soon, which means no more driver updates and whatnot. Sigh.
=========== The Fog People =========== Intel i7-4790 16GB RAM ASUS Z97 Roland OctaCapture Win10/64 SONAR Platinum 64-bit billions VSTs, some of which work
|
mitchpetel
Max Output Level: -85 dBFS
- Total Posts : 275
- Joined: 11/6/2007
- Location: London, Ontario, Canada
- Status: offline
Re: Roland Quad Capture - Sonar X1 - Audio Settings help!!!!
January 04, 17 3:27 PM
(permalink)
I've tried all bit depths with the same result every time.
I have a spare usb card I'm going to install into my PC and bypass the onboard ones to see if that helps.
Sonar X1 Studio, Win 10 64bit , Roland Quad-Capture, (Alesis MultiMix16 USB 2.0 , Zoom R16), M Audio KeyRig 49 USB controller ezDrummer, NI Studio Drummer, Groove Monkee MIDI loops, PODxt,
|
mitchpetel
Max Output Level: -85 dBFS
- Total Posts : 275
- Joined: 11/6/2007
- Location: London, Ontario, Canada
- Status: offline
Re: Roland Quad Capture - Sonar X1 - Audio Settings help!!!!
January 04, 17 8:08 PM
(permalink)
Problem solved! I installed a USB PCI card and plugged my Quad Capture interface into that instead of the on board USB ports and I no more issues using ASIO drivers.
Thanks to all that helped!!!
Pete
Sonar X1 Studio, Win 10 64bit , Roland Quad-Capture, (Alesis MultiMix16 USB 2.0 , Zoom R16), M Audio KeyRig 49 USB controller ezDrummer, NI Studio Drummer, Groove Monkee MIDI loops, PODxt,
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 9/28/2014
- Location: Norway
- Status: offline
Re: Roland Quad Capture - Sonar X1 - Audio Settings help!!!!
January 05, 17 7:28 AM
(permalink)
Glad you figured it out  All the best.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
auto_da_fe
Max Output Level: -56.5 dBFS
- Total Posts : 1866
- Joined: 8/4/2004
- Status: offline
Re: Roland Quad Capture - Sonar X1 - Audio Settings help!!!!
January 05, 17 1:30 PM
(permalink)
As an aside...i renamed the aud.ini file and my OCTA-CAPTURE is behaving much better now. (Thanks Kamikaze)
I seem to remember sometime ago I manually edited something in AUD.INI to make the 8 cores on my PC more balanced. That worked for a long time. Just guessing...but maybe something in WIN10 updates, Latest Sonar, WIN10 ASIO driver, who knows???? may have not liked that setting.
Sonar is working much better and is much more stable with my OCTA capture and WIN10, however i do see my first core spiking all the time while the other cores hardly move. But as long as it all works I will not worry about the optics of my cores not looking uniform...
JR
HP DV6T - 2670QM, 8 GB RAM, Sonar Platypus, Octa Capture, BFD2 & Jamstix3, Komplete 10 and Komplete Kontrol Win 10 64 SLS PS8R Monitors and KRK Ergo https://soundcloud.com/airportface
|
eric.birchall
Max Output Level: -90 dBFS
- Total Posts : 48
- Joined: 3/15/2011
- Location: Scotland
- Status: offline
Re: Roland Quad Capture - Sonar X1 - Audio Settings help!!!!
January 05, 17 2:16 PM
(permalink)
Hi , I looked at my ocatcapture driver settings (same screen as you posted).
I'm not a very experienced user but over time I have run with the audio buffer size at 5 (6 default) and the "match with the Asio sample rate" UNchecked. The rest is the same. Sonar audio settings are the same as you posted except the playback Timing Master and Record Timing master
Last night my band (6 of the 8 inputs recording) came around and I recorded in one take 2 hours of new song ideas (which I separate out later) and had no problems except the time the screen took to process the audio pictures.
I am Win 10 , but not connected to the internet only to update sonar .(currently running 22.10.0 Build 19[2016.10] - 64
Hope this helps a bit , I love the flexibility I have using the Octacapture with Sonar!
Ric
Sonar Platinum , Windows 10 64bit Intel Core2 Quad Q9550 8GB 1TB (as 2 drives) 240 GB SSD KORG Kross , Roland Octa-Capture 1.51 (1.5.2 Driver) , dual monitors
|