igiwigi
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2011/04/20 03:37:52
- Status: offline
Re: Toast screen turnoff!!
2018/08/05 21:07:35
(permalink)
Hi Audio
This started happening after the first time that script error kept coming upthat everyone mentions
I started Bandlab up tonight and soon as i got to a basic load screen ,a message comes up saying it does not recognize my Focusrite 6i6 drivers and it was hard to see as the message box kept flickering and also making popping noises as It flicks.
I have been working on a song In Cubase as that Is solid and was wondering about some fx plugs that I could do with that Is not in cubase.
Fired Bandlab up and this problem starts.
I had to go to task manager to shut Bandlab down.
I managed to get to the preferences and had to recheck all the focusrite drivers again.
Fired up Bandlab again and the flickering and noise starts again
I have a fast up to date machine and no problem with cubase.
Something is buggy In there.
I have uninstalled and re-installed ,but the same thing happens every time.
If Cubase works ,so should Bandlab!!!
Cubase is flawless for me
All the best
john
|
igiwigi
Max Output Level: -82 dBFS
- Total Posts : 437
- Joined: 2011/04/20 03:37:52
- Status: offline
Re: Toast screen turnoff!!
2018/08/05 21:10:39
(permalink)
Hi I will check on the focusrite site to see if there are any driver updates ,but my 6i6 never fails me until Bandlab.
Just checked and My 6i6 still has the same control panel .
|
bitman
Max Output Level: -34 dBFS
- Total Posts : 4105
- Joined: 2003/11/06 14:11:54
- Location: Keystone Colorado
- Status: offline
Re: Toast screen turnoff!!
2018/08/05 23:02:40
(permalink)
It's cute but given time and it's going to seem as silly as to whoever said no to "Hey lets...." before.
After what, 4 days. It's getting to look kinda "gay" in the 80s dorky sense of the word.
|
Johnbee58
Max Output Level: -72 dBFS
- Total Posts : 946
- Joined: 2014/06/21 10:45:53
- Location: Reading PA
- Status: offline
Re: Toast screen turnoff!!
2018/08/05 23:48:03
(permalink)
To gripe about the toast screen is petty, really. I could see it if it slowed up the load time, but it doesn't seem to (at least for me) and could, as Noel suggests, give you a hint to where trouble is if you run into a load error. Besides, it's cute. Lighten up!  JB
Lenovo Core i5 4460 Desktop PC (Windows 8 64 bit), Focusrite Scarlett 6i6, Nektar LX61 Keyboard MIDI Controller, Avantone Pro CV-12 tube condenser microphone, JBL LSR308 8" active monitor speakers. Cakewalk by Bandlab, Reason 7, NI Session Strings Pro, NI Strummed Acoustic Guitar, Miroslav Philharmonic, Auturia DX7 V, Garritan JABB 3, EZ Keys, EZ Drummer. "I will create music the way I want to whether a million people are listening or no one is listening." Dan Fogelberg, Singer/Songwriter-1951-2007
|
promidi
Max Output Level: -66 dBFS
- Total Posts : 1220
- Joined: 2014/11/21 18:46:39
- Location: South Australia
- Status: offline
Re: Toast screen turnoff!!
2018/08/05 23:52:47
(permalink)
igiwigi
Anyone like me having grief with this program.
Nope! CbB run fine here with my 2nd Gen Focusrite 2i2 on a fully patched Windows 10 Pro machine. Every CbB update has been fine.
Windows 10 64bit fully patched, 16 gig ram . PCR-800 Controller. (Working in Win 10 1809 64bit)CPU: i5 4670. Video: Nvidia GTX560ti (latest drivers). Audio IF: Focusrite 2i2 2nd Gen
Internet always on.
Software: Cakewalk by Bandlab (2018.09 B29)
ASIO mode. 24bit 48khz 256 samples Rapture Pro, AAS GS2, VS-3, EP-4, VA-2, Chromophone 2, Z3TA+ 2, Addictive drums 2, Addictive Keys, Mpowersynth (latest), Iris 2, GPO5, Sampletank 3,
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 00:01:10
(permalink)
promidi
igiwigi
Anyone like me having grief with this program.
Nope! CbB run fine here with my 2nd Gen Focusrite 2i2 on a fully patched Windows 10 Pro machine. Every CbB update has been fine.
It was a conflict with the Cubase Generic Low Latency Driver http://forum.cakewalk.com/FindPost/3775572
|
bitman
Max Output Level: -34 dBFS
- Total Posts : 4105
- Joined: 2003/11/06 14:11:54
- Location: Keystone Colorado
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 02:31:31
(permalink)
But if you're ever having troubles that will quickly become a mock.
|
dcmg
Max Output Level: -83 dBFS
- Total Posts : 393
- Joined: 2005/02/14 15:35:38
- Location: Phoenix, AZ.
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 03:15:16
(permalink)
Hidden_Symmetry
Do you really stare at it when the projects are loading up?
I'm hoping it will come in handy if & when a project won't open. It might give an indication as to what plugin isn't loading properly. Not sure if it operates that way but it would be great if it did.
Not bothered by the toast, but in ref to above, it doesn't appear to be of any real help if you have a plugin misbehaving. I know firsthand. Clean Win10 install, just got all plugins, softsynths, DAWs up and running. All Cakewalk projects were starting through their load-ins and POOF....CWBL just closes with no error, no communication as to what went wrong. There wasn't info ( or it's too fast??) to glean any insights. For the record, I did the "shift +start" on a test project and restricted plugins until I found an offending Breverb2 by Cakewalk. Something was choking everytime it hit that. Reinstalled, bypassed on all current projects and reinserted the new version of Breverb and all is well...... ( only left all that info for some other soul who runs into that). Toast screen didn't signal there was an issue. Anyway...toast screen: OK, doesn't bother me, but not sure you'll ever lean on it for troubleshooting from my anecdotal evidence.
CWBL/SPlat/Studio One Pro on Win10-64 Bit Asrock H370 Pro4 w/Intel i7-8700 16GB Adata DDR4 2666 RAM All SSD's/ On-Board Intel Graphics Apollo 8 Quad FW/TB, AD2, Trillian, Omni, S-Gear, Waves, Soundtoys, TRacks, MicPres: Langevin DVC, Great River, UAD LA610Mk2. Dynaudio Monitors, and other stuff.
|
Noel Borthwick [Cakewalk]
Cakewalk Staff
- Total Posts : 6475
- Joined: 2003/11/03 17:22:50
- Location: Boston, MA, USA
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 03:24:12
(permalink)
You could screencap the toasts and would see the last plugin that it tried to load load before it crashed. But point taken that the info flies by very quick. The ability to capture that to a log would be useful in the future.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 03:29:44
(permalink)
I would like to see the toast info written out to the project folder to use as a manifest; preferably in a human readable tagged format. Maybe even containing preset data formatted in a way that could be imported by the Preset Manager.
|
Noel Borthwick [Cakewalk]
Cakewalk Staff
- Total Posts : 6475
- Joined: 2003/11/03 17:22:50
- Location: Boston, MA, USA
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 03:33:48
(permalink)
We could do more verbose logging only in safe mode. It would be expensive to write a log each time and it would slow down the load.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 03:44:13
(permalink)
☄ Helpfulby joden 2018/08/06 23:44:37
Maybe be run on demand like safe-mode or switched in preferences like the scan log?
For some the start up penalty might be worth the extra documentation.
|
digimidi
Max Output Level: -81 dBFS
- Total Posts : 496
- Joined: 2003/11/15 19:21:08
- Location: Eastern part of the country
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 04:43:32
(permalink)
The Toast thing is good. I have no problem with it and thank Noel, Meng and the gang for implementing it. No one should sweat it. It's fine.
I started out with nothing and I still have most of it left... http://daveowenmusic.com/http://fabulous52s.com/https://soundcloud.com/daveowenmusic Sonar Platinum Edition/Cakewalk by BandLab: Dell 8700 XPS i7 16GB RAM, Cyberpower laptop w/8GB RAM/i7/2GB NVidia card/Tascam US1641/Focusrite 18i6/Melodyne Studio 4/Waves Plugs (a lot)/Garritan/EWQL Symphony Silver & Fab 4 and a bunch of other stuff. Studio One 3/Magix Samplitude Pro X3 Suite/Mixcraft 8 Pro/Reaper/Acid Pro 8
|
gustabo
Max Output Level: -49.5 dBFS
- Total Posts : 2591
- Joined: 2009/01/05 17:32:38
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 10:32:50
(permalink)
igiwigi
.....
I have uninstalled Bandlab as I am a great believer in ,you get nothing free.
This program is getting worse every update.
I have a latest fast machine and it is rock solid. There is nothing wrong with my computer.
Cubase works fine.
Anyone like me having grief with this program.
All the best
John
Nope, not at all.
Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/
|
dcmg
Max Output Level: -83 dBFS
- Total Posts : 393
- Joined: 2005/02/14 15:35:38
- Location: Phoenix, AZ.
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 17:44:02
(permalink)
scook
I would like to see the toast info written out to the project folder to use as a manifest; preferably in a human readable tagged format. Maybe even containing preset data formatted in a way that could be imported by the Preset Manager.
scook
Maybe be run on demand like safe-mode or switched in preferences like the scan log?
For some the start up penalty might be worth the extra documentation.
Nice idea. Safe-mode>Yes To All> Yes option brings a "Generate Log?" prompt >Yes
CWBL/SPlat/Studio One Pro on Win10-64 Bit Asrock H370 Pro4 w/Intel i7-8700 16GB Adata DDR4 2666 RAM All SSD's/ On-Board Intel Graphics Apollo 8 Quad FW/TB, AD2, Trillian, Omni, S-Gear, Waves, Soundtoys, TRacks, MicPres: Langevin DVC, Great River, UAD LA610Mk2. Dynaudio Monitors, and other stuff.
|
Grumbleweed_
Max Output Level: -72 dBFS
- Total Posts : 915
- Joined: 2007/11/01 09:13:58
- Location: Southampton, England
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 19:33:49
(permalink)
I just tried opening the latest version to see what the fuss is and I thought the info box was a great idea - at least you know what is going on as the VSTs load. The little message at the end could go away though..... Grum.
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Toast screen turnoff!!
2018/08/06 23:45:22
(permalink)
scook
Maybe be run on demand like safe-mode or switched in preferences like the scan log?
For some the start up penalty might be worth the extra documentation.
This ^^^! Good idea. That way it is up to the individual.
|
mettelus
Max Output Level: -22 dBFS
- Total Posts : 5321
- Joined: 2005/08/05 03:19:25
- Location: Maryland, USA
- Status: offline
Re: Toast screen turnoff!!
2018/08/07 11:41:52
(permalink)
I forget the app now, but long ago there was an app that cycled one-liners to be funny similar to "Secretly plotting to confuse you further..." etc.
Be thankful the toast doesn't say something like "BTW, your web cam is on..."
+1, to the log when loading in safe mode, that would be helpful to everyone.
ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
|
chris.r
Max Output Level: -86 dBFS
- Total Posts : 206
- Joined: 2014/12/20 20:18:15
- Status: offline
Re: Toast screen turnoff!!
2018/08/08 01:23:06
(permalink)
scook
Maybe be run on demand like safe-mode or switched in preferences like the scan log?
For some the start up penalty might be worth the extra documentation.
And maybe a pop-up window asking if you'd like to create scan log when you first restart cakewalk after a crash?
|