V-S 700 + Octa Capture error...

Author
Post
Essentials Only Full Version
funboyuno
Max Output Level: -90 dBFS
  • Total Posts : 30
  • Joined: 2012/03/14 17:38:51
  • Status: offline
2012/04/11 20:53:06 (permalink)

V-S 700 + Octa Capture error...

Got the Octa Capture today and installed per instructions and then...
I get an error message: VS EXPAND : Version does not match.
WTF??????
ALl the latest version of s/w installed and  I can get the devices to show for one or the other - the V-S 700 devices or the Octa Capture, not both. The patchbay shows up...
 
Any help out there?
#1

10 Replies Related Threads
    Crg
    Max Output Level: 0 dBFS
    • Total Posts : 7719
    • Joined: 2007/11/15 07:59:17
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/04/11 22:58:44 (permalink)
    You have a patchbay with software  in between the octacapture and the VS700? If you do, the patchbay is not going to pass the information to the computer that the Vs700 is plugged into ? What's your hookup consist of? Try disabling the patchbay software in Sonar. Is the VS 700 greyed out or not even listed?

    Craig DuBuc
    #2
    funboyuno
    Max Output Level: -90 dBFS
    • Total Posts : 30
    • Joined: 2012/03/14 17:38:51
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/04/12 13:05:11 (permalink)
    i do not have a patchbay other than the octacapture s/w. I get either the 700 devices OR the OC devices - not both. 700 is greyed out.
    s/w:    Sonar X1 expanded, Win7 64bit,
    h/w:    v700 set w/latest drivers & firmware, octa capture ver 1.5 - bios 1.0
    comp:   Asus mb, intel 2500k cpu, 16GB ram, dual monitors

    thanks - on hold w Roland support right now - they are having a moment as well
    #3
    funboyuno
    Max Output Level: -90 dBFS
    • Total Posts : 30
    • Joined: 2012/03/14 17:38:51
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/04/12 13:23:59 (permalink)
    I forgot to add - opening control panel in windows to devices shows the octa capture ASIO panel  and I check the vs expand box and the Panel for the VS700 shows VS Expand: version does not match.
    Got off the phone with Roland and am going to redo firmware updates on the V700R and the Octa Capture. Thanks to Tony at Roland for his help!

    Here goes....
    #4
    funboyuno
    Max Output Level: -90 dBFS
    • Total Posts : 30
    • Joined: 2012/03/14 17:38:51
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/04/12 20:28:06 (permalink)
    No go. tried everything and can't get them to work together. In Windows -  VS Expand is not triggering the hardware with the driver settings - not talking except it sees the sample rate and reports that.
    This is an odd problem that no one seems to have encountered...until now?
    #5
    Dyonight
    Max Output Level: -80 dBFS
    • Total Posts : 529
    • Joined: 2009/02/02 13:28:52
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/04/13 02:10:39 (permalink)
    Strange... Is the VS-700 driver 2.01? Not 2.0

    Are both the Octa-Capture and the vs-700 connected on the same usb controller i.e. 2 stacked usb inputs on the back of your computer?

    Are you shure the usb input are not usb 3.0 inputs?

    Let us know if you find out!

    Sonar Platinum (Latest monthly update) / Roland A300-pro / AMD FX-8350 / Firepro V4900 / 16gb ram / RME HDSPe MadiFx
    #6
    funboyuno
    Max Output Level: -90 dBFS
    • Total Posts : 30
    • Joined: 2012/03/14 17:38:51
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/04/13 14:06:32 (permalink)
    VS-700 driver is 2.0.0, same usb controller, all usb 2.0.
    I will look for the 2.01 drivers, maybe that will help......
    #7
    funboyuno
    Max Output Level: -90 dBFS
    • Total Posts : 30
    • Joined: 2012/03/14 17:38:51
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/04/13 15:00:32 (permalink)
    Found 2.01 drivers installed and working!
    I love computers - my bad.
    Thanks for the help! THe missus on the other hand wanted to send it back and get a refund and spend more time with me -HA! Fooled her.
    #8
    Rob[at]Sound-Rehab
    Max Output Level: -47 dBFS
    • Total Posts : 2819
    • Joined: 2011/02/03 04:31:35
    • Location: Sound-Rehab, Austria
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/06/02 02:57:23 (permalink)
    funboyuno


    Found 2.01 drivers installed and working!
    I love computers - my bad.
    Thanks for the help! THe missus on the other hand wanted to send it back and get a refund and spend more time with me -HA! Fooled her.
    Hi funboyuno!
    How's it going with the 2.0.1 drivers? Everything working fine with Vs-700 and Octacapture??
     
    I would have to update from 2.0.0 to 2.0.1 for the same reasons but found some problems reported in another thread but that stopped dead and dates back to before X1d ...
     
    Your comments are much appreaciated!
     
    Rob
     

    GOOD TUNES LAST FOREVER
      +++   Visit the Rehab   +++
     
    DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
    Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
    VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
    #9
    javajunkie
    Max Output Level: -90 dBFS
    • Total Posts : 31
    • Joined: 2009/03/26 17:56:12
    • Location: Denver, CO
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/08/02 08:46:07 (permalink)
    X1d does not fix the issue
    #10
    Rob[at]Sound-Rehab
    Max Output Level: -47 dBFS
    • Total Posts : 2819
    • Joined: 2011/02/03 04:31:35
    • Location: Sound-Rehab, Austria
    • Status: offline
    Re:V-S 700 + Octa Capture error... 2012/11/01 14:49:13 (permalink)
    Just got my problem fixed + posted in other threads.

    I hate threads that stop dead while there might be a solution ...

    Read links below in case you have troubles with VS EXPAND for VS-700 and OctaCapture

    http://forum.cakewalk.com/tm.aspx?high=&m=2687803&mpage=1#2706131
    http://forum.cakewalk.com/tm.aspx?m=2510822





    GOOD TUNES LAST FOREVER
      +++   Visit the Rehab   +++
     
    DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
    Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
    VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
    #11
    Jump to:
    © 2024 APG vNext Commercial Version 5.1